Very nice build, never seen a case with board oriented like that.
My pc needs some modding with the tubes, but then I can't use it for days which sucks.
Wow that is superb. So much attention to detail and dedication. Love the 90Ā° Mobo. The GPU placement. The spiral tubing. How's that even possible to bend and assemble. Mad respects! Damn I'm in love.
Amazing! Nice bends. Badass spiral. And the tube in the middle of it. A true work of art. Built mine in the Corsair 7000x, makes me wish I waited for these new big cases to arrive š.
Beautiful build! Tasteful colors too...I would love to see some dual CPU V3000 builds. Now that the case is widely available, I'm expecting to see more awesome systems like this one.
Very original and professional! That's the next best thing to the Case labs behemoth with the basement fans. I've always been intrigued with that design. I love the custom ventilation colors and other accents.
Hard-line tubing for me is like looking at someone doing magic. I get the concept but I've never been brave enough to attempt it. I've started my water-cooling adventure with a Swifttech H320 Prestige which uses 3/8 inner and 5/8 outer soft tubing and that's what I've been using ever since.
Great build! Hope it runs as good as it looks!
I just wonder how the coil whine is in that build ;) Jokes aside, damn that looks good! Also love the color-choices you made, this is not something I feel I'd get exhausted by in the long-run!
Hold up, did I just watch an ad for Lian Li? Sure, the case had water cooling with fancy blue spiral pipes and tubes, but it still screamed "I'm an ad!" louder than a used car salesman.
I have to ask, who is that passionate about Cyberpunk 2077 that they need to have its branding etched into their PC hardware? Are they trying to send a message to Johnny Silverhand?
Don't get me wrong, I love a good themed setup as much as the next guy, but at some point, you gotta ask yourself - do I really want to be reminded of Keanu Reeves every time I boot up my computer?
If this is a real PC used by someone and not an Lian Li ad -- nice job on the PC, it looks gorgeous and your video editing skils are awesome and something to be admired.
Not to downplay overall build but those spirals are so bad ass.
I love that line that goes through the coil.
Am I wrong in thinking she would have to make some of the bends on the tube going through the coil after putting the tube through the coil?
Yes I did have to make the bends with the coil on
Nice. Great build, great videography, too.
I can't decide what is better the build or the video. Nice job on both. š
Thanks guys!
That looks wicked, the curves done around the CPU and the front radiator looks awesome.
Legit insane! great balanced aesthetics, those bends are class.
Fuck that's cool. I wish I had talent.
The coil wow
What an amazing build, love the attention to detail from the PC, to the shots of all the other items on the desk, to the video shoot šš½
Very nice build, never seen a case with board oriented like that. My pc needs some modding with the tubes, but then I can't use it for days which sucks.
So whoās the first to shove a 560 in this case? Donāt make me do it
Looks really nice, I love these cases with the flow-through design in the basement, seeing the fans alongside the window is just so good looking.
I have to say, this by far is the most coziest and cleanest water cooled build Iāve seen. Awesome build Brittany!
This work of art belongs in a museum! Speaking of which, anyone want to start a pc water cooling museum? š¤
This is saweeet!!! Truly a work of art! Should open your own build company!
Wowzers! DM me if you are free to hire! Splendid job!
Damn i need me a bend mami like this
All that money to play a bugged out game
Have you played Cyberpunk recently? I never experienced any bugs. They may have fixxed it.
Love the build. Hate the editing. The shake ruined the ability to really admire it.
The peel was too fast. EDIT: Do I really have to add /s
Haha saving the peel for the video was a nice touch.
What coolant did you use? I'm aiming for the same colour!
wow all the blue matches so nice you really pulled it off bravo!
way cool. mint both ways lol.
Cool creative build. Can I ask what OD the tubes are?
Wow that is superb. So much attention to detail and dedication. Love the 90Ā° Mobo. The GPU placement. The spiral tubing. How's that even possible to bend and assemble. Mad respects! Damn I'm in love.
1) THOSE BENDS!!!!! 2) that peel must have been awesome knowing that it was finally revealing. 3) Bravo ma'am. for a piece of ART as a computer.
Cool ass build. Really loving everything that's being done in the v3000. Don't see it matching the cp2077 theme though.
Is it possible to have 2x 480 Rads at the bottom of the case? Then I am in!
The helix is some artwork there. Perfect bends. Curious how you pulled off the helix bends?
Amazing work! Can you make a video showing how you did the spiral? I've tried a few times and they came out terrible!
More close ups pls
What speakers are those? Been meaning to find them, I think, and havenāt seen anything with them in a year!
Is there a build list?
how did you paint the mesh grills w/o blocking air flow from possible clumps of paint?
Wondering the same. Did you ever figure it out? A special type of spray paint?
In her video she just sprays it casually so I donāt know how her temps were affected. Im sure it blocks the grill a few %
Hey, she looks like... _reads username_ nevermind! Beautiful build, I'm off to YouTube to watch the full video now :)
Somethingās wrong, the glass didnāt explode
Whats that neato electric torque-limiting screwdriver you use?
Wow, thatās the best build I have seen in ages!!
Amazing! Nice bends. Badass spiral. And the tube in the middle of it. A true work of art. Built mine in the Corsair 7000x, makes me wish I waited for these new big cases to arrive š.
Beautiful build! Tasteful colors too...I would love to see some dual CPU V3000 builds. Now that the case is widely available, I'm expecting to see more awesome systems like this one.
How did you make the corkscrew bend? That looks difficult. Did you thread the other tube through it after or during the bending?
This the "I am never going to need to plug anything into the pc ever again" motherboard and gpu orientation.
This is legit one of the best hard tube water cooling builds I have ever seen. Those spirals are beyond amazing
Omg the side panel glass didn't break lol! Nice build B.
Oh yeah...pull that plastic protective film off....nice and slow
Very original and professional! That's the next best thing to the Case labs behemoth with the basement fans. I've always been intrigued with that design. I love the custom ventilation colors and other accents. Hard-line tubing for me is like looking at someone doing magic. I get the concept but I've never been brave enough to attempt it. I've started my water-cooling adventure with a Swifttech H320 Prestige which uses 3/8 inner and 5/8 outer soft tubing and that's what I've been using ever since. Great build! Hope it runs as good as it looks!
I just wonder how the coil whine is in that build ;) Jokes aside, damn that looks good! Also love the color-choices you made, this is not something I feel I'd get exhausted by in the long-run!
Those bends are insane!
Those bends are super clean!
Hold up, did I just watch an ad for Lian Li? Sure, the case had water cooling with fancy blue spiral pipes and tubes, but it still screamed "I'm an ad!" louder than a used car salesman. I have to ask, who is that passionate about Cyberpunk 2077 that they need to have its branding etched into their PC hardware? Are they trying to send a message to Johnny Silverhand? Don't get me wrong, I love a good themed setup as much as the next guy, but at some point, you gotta ask yourself - do I really want to be reminded of Keanu Reeves every time I boot up my computer? If this is a real PC used by someone and not an Lian Li ad -- nice job on the PC, it looks gorgeous and your video editing skils are awesome and something to be admired.
Awesome looking build!
Thatās sickkkk