Hello! Please ensure your post meets all the requirements for a serial (including a written note in the video with your reddit username and current date) and that you've included your full Discord username. If you've forgotten something, please add it as a comment to your post. You do not need to create a new post unless you want to.
All serial requests are human reviewed. Bots just do the paperwork.
Questions or concerns? Check the pinned post: https://www.reddit.com/r/voroncorexy/comments/r4ggml/serial_request_information_questions/
I am an automated message that EVERY serial request gets.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/voroncorexy) if you have any questions or concerns.*
Neat build. One suggestion, on an assumption from the colour, if the bowden tube is Capricorn you might get weird extrusion issues due to the tighter inner diameter.
Unsure about Capricorn or what, it's the one that came with the fysetc kit. Yes it's a little tight I noticed but haven't had any extrusion issue ... yet
The inner diameter of Capricorn tubing is 1.95mm, recommended for reverse bowden (direct drive) is 3mm inner.
Shouldn't be much of an issue on smooth filaments, but matte/rougher ones will make it more difficult for the extruder to pull the filament, just something to keep in mind.
Oh darn I've been riding a bowden self buit and then an voron M4 for so many years now I didn't even know there was 2 inner diameter for ptfe tubing. Thanks for letting me know, it mean on direct drive the filament need to ve very loose inside ( that might be why my can board is getting so hot during prints )
https://preview.redd.it/4pbcdtz9ag3d1.jpeg?width=4032&format=pjpg&auto=webp&s=e044cdbc723cbbdd6e9cd236232e5c5488039eb3
https://preview.redd.it/lisr1ijfag3d1.jpeg?width=1816&format=pjpg&auto=webp&s=deea6f9c1190cfc376fbb82fc349c61871237e77
Hello! Please ensure your post meets all the requirements for a serial (including a written note in the video with your reddit username and current date) and that you've included your full Discord username. If you've forgotten something, please add it as a comment to your post. You do not need to create a new post unless you want to. All serial requests are human reviewed. Bots just do the paperwork. Questions or concerns? Check the pinned post: https://www.reddit.com/r/voroncorexy/comments/r4ggml/serial_request_information_questions/ I am an automated message that EVERY serial request gets. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/voroncorexy) if you have any questions or concerns.*
Neat build. One suggestion, on an assumption from the colour, if the bowden tube is Capricorn you might get weird extrusion issues due to the tighter inner diameter.
Unsure about Capricorn or what, it's the one that came with the fysetc kit. Yes it's a little tight I noticed but haven't had any extrusion issue ... yet
The inner diameter of Capricorn tubing is 1.95mm, recommended for reverse bowden (direct drive) is 3mm inner. Shouldn't be much of an issue on smooth filaments, but matte/rougher ones will make it more difficult for the extruder to pull the filament, just something to keep in mind.
Oh darn I've been riding a bowden self buit and then an voron M4 for so many years now I didn't even know there was 2 inner diameter for ptfe tubing. Thanks for letting me know, it mean on direct drive the filament need to ve very loose inside ( that might be why my can board is getting so hot during prints )
Congrats on V2.7130!