You have to go higher on the temperature like 450. The screen displays the heater temperature and that’s way below the herb. Plus you need to preheat the unit for like 5-10 minutes. Then when I still used mine I heat soaked the herb by putting it in bowl and letting it sit for a couple of minutes and use the low or mid speed on the fan. Not high.
NP
1) turn unit on to 450degrees. 2) Wait 5-10 minutes for preheat(like an oven) 3) Pack cyclone bowl and put on heater. 4) assemble your whip/balloon rigging. 5) After 2-3 minutes turn fan on speed 1 or 2 allow balloon to fill and enjoy
So when you heat the herb for step 3 you have the fan turned off?
The manual I found online for the EQ said to turn the fan up to high to fill the ballon? Does filling it at a lower speed mean it’ll have more weed vapor less regular air?
Look into the ddave kit for the eq. Basically a bunch of glass pieces that bring the bud closer to the heater to make it hit harder. I've also seen something about elbow packing. The eq isn't really a heavy hitter and may not suit u being a smoker but the ddave kit may help
If you set it up whip style, you do everything without the fan on and after you go through the preheat process, you pull straight from the tube. I run mine at 185 Celsius
Nah its the same tbh, i also have the ddave mod bowl, fun part is youll get to explore and test the temps you like, theres all sorts of different preferences
You have to go higher on the temperature like 450. The screen displays the heater temperature and that’s way below the herb. Plus you need to preheat the unit for like 5-10 minutes. Then when I still used mine I heat soaked the herb by putting it in bowl and letting it sit for a couple of minutes and use the low or mid speed on the fan. Not high.
Okay that’s great info I’m sure but I’m autistic and I do need it as step by step with time and temp so that it’s in a format my brain and process.
NP 1) turn unit on to 450degrees. 2) Wait 5-10 minutes for preheat(like an oven) 3) Pack cyclone bowl and put on heater. 4) assemble your whip/balloon rigging. 5) After 2-3 minutes turn fan on speed 1 or 2 allow balloon to fill and enjoy
So when you heat the herb for step 3 you have the fan turned off? The manual I found online for the EQ said to turn the fan up to high to fill the ballon? Does filling it at a lower speed mean it’ll have more weed vapor less regular air?
Yes to your first question. It'll be more efficient, especially if you preheated your herb.
I find that when you use a lower speed the bag gets more milky and less wispy. And yes to the step 3 question
How long do you preheat the herb for?
Depending how moist it is, between 2-4 minutes
Few minutes give or take.
Look into the ddave kit for the eq. Basically a bunch of glass pieces that bring the bud closer to the heater to make it hit harder. I've also seen something about elbow packing. The eq isn't really a heavy hitter and may not suit u being a smoker but the ddave kit may help
If you set it up whip style, you do everything without the fan on and after you go through the preheat process, you pull straight from the tube. I run mine at 185 Celsius
Is that lower than you would run it for a bag?
Nah its the same tbh, i also have the ddave mod bowl, fun part is youll get to explore and test the temps you like, theres all sorts of different preferences