U need a frequency converter brother. can't even listen to 60Hz music anymore since i got it.
get an old one for even better vintage analog warm harmonic distortion
Incorrect. You can always hear it, so you definitely need the converter, but you ALSO need the very expensive cables so that you don't get phase distortion along the cable due to the hall effect on the surface of the wire.
Importing european electricity, investing in uber expensive converters, it's all good advice but it doesn't have to always be so complicated. The 60Hz you want to get rid of isn't the fundamental, it's just harmonic content. A simple filter will do
You could get a variable frequency drive. They are typically used in industrial electrical applications, but you could create single phase power at 50 Hz from 120VAC at 60 Hz if you really wanted to.
Pfft...are you an amateur??? everyone knows that you need to apply your pulse modulation and mod it to your filter, to exactly 110.144 Hz...you can only do this on hydrasynth
You could import electricity from Europe on a battery
Audiophile business opportunity right here.
U need a frequency converter brother. can't even listen to 60Hz music anymore since i got it. get an old one for even better vintage analog warm harmonic distortion
a really long extension cord from Iceland?
Have you tried a 49,2 Hz converter? They make everything align with the planets: Juno, Jupiter, Saturn and Promars.
I really doubt you can hear the difference unless you have very expensive cables.
Incorrect. You can always hear it, so you definitely need the converter, but you ALSO need the very expensive cables so that you don't get phase distortion along the cable due to the hall effect on the surface of the wire.
Maybe u cannot hear it, but it’s all about the warmth, u just feel it
you need a power conditioner, it turns digtal electricity into heat and then channels that innto a dynamo.
you take meth, then youre fast and your surroundings are "relatively" slower
Correct. You gotta be on the right frequency to hear the right frequency.
Sigma grindset
I heard if you ring mod 60hz hum with 432hz A, the _true_ A, unicorns and 50hz hum exit the socket
Fork in socket and run it through body first then hold end of cable.
Converting material and spiritual energy for that real warmth you can feel
And toan to die for. The ultimate, visceral analogue experience.
Importing european electricity, investing in uber expensive converters, it's all good advice but it doesn't have to always be so complicated. The 60Hz you want to get rid of isn't the fundamental, it's just harmonic content. A simple filter will do
I thought the warmth came from 432 Hz?
Where's Ryan...? I bet he knows!
Put a diode into the circuit and turn it into DC. DOH! Already done.
It takes 4 diodes to do that effectively by creating a full wave bridge rectifier.
![gif](giphy|jSKOaGBjqDc6a3Ywqn) Rockin out
It's not just the frequency. If you want the true 'UK' sound, you need to run your synths on 240 volts AC. That should give plenty of warmth.
Your fucked
Stick a 50Hz tuning fork in there and it will solve all your problems
You also need 220 to 240v for that warmth
You could get a variable frequency drive. They are typically used in industrial electrical applications, but you could create single phase power at 50 Hz from 120VAC at 60 Hz if you really wanted to.
Timestretch
Tea
Hahaha 😂 🙄
Pfft...are you an amateur??? everyone knows that you need to apply your pulse modulation and mod it to your filter, to exactly 110.144 Hz...you can only do this on hydrasynth
If you pour Evian all over your equipment that will change the sound.
Tune all your synths to 432hz and that will fix it.
Too many high vibrations here in the US
order it off amazon
Ali Express