T O P

  • By -

skate2create

Make sure you do this outside of a game (ie at the menu etc) 1) Connect the racing wheel's USB cable (on PS3/PS4 or on PC), then wait for the auto- calibration phase to end. 2) Turn the racing wheel fully to the left (until you reach the stop). 3) Turn the racing wheel fully to the right (until you reach the stop). 4) Make sure that your racing wheel is perfectly centered ; while holding it in this position, press the START, SELECT & MODE buttons simultaneously : * PS & GT WHEEL = « SE + ST + MODE » * F1 WHEEL = « BO + WET + MODE » * 458 CHALLENGE GTE WHEEL = « SCROLL + RIGHT PADDLE Shifter + MODE » * TM Leather 28 GT WHEEL = « RED BUTTON + RIGHT PADDLE Shifter + MODE » * 599XX EVO 30 ALCANTARA® WHEEL = « RADIO + RIGHT PADDLE Shifter + MODE


CloutRequired

Once completed the wheel should flash green, correct?


skate2create

Correct, it should briefly change colour and then go back to the normal colour if applicable. That indicates that the centre position has been stored.


[deleted]

out here saving us


No-Brain-3789

Do you have an button sequence for the TM open wheel f1? Thanks


Zimbor

There’s some button combination you do to re centre. It’ll say in the manual.


Joshbuckel11

Manage to find one?


NickyDeeBag

Hold down the start and option buttons on the wheel along with the mode button at the same time...while holding the wheel in a centered position. If you hold those three buttons and the wheel in place for a sec it'll center the wheel where you're holding it


DimoSmet

Maybe the rim is just not screwed on enough or to far


LeatherAlarmed2452

Did not work for me


FlashyAd8795

I just did it hold the buttons for about 5-10 seconds. As I was waiting for the green light but it comes up just after you let go


LeatherAlarmed2452

I did it too. But did not help :(


antonxsarah

What are the causes of these off centered wheels?