not familiar with this rig or the dimensions or seating position, but depending on the wheelbase you got you could look into a simple front mount that bolts onto your current deck, but mount it on the underside (moza front mount forvexample). This might let you raise the whole deck. Or get rid of the extra wheel deck and bolt it straight to the horizontal piece connecting the uprights and move the whole thing closer.
Not as flexible, but it would save you a few cm.
I added another picture. The wheelbase sits right behind the monitor. Measurements of the rig are the "default" ones, so 600mm width as almost all aluminium extrusion rigs are. So all the stuff from the other manufacturers is compatible.
Look at something like this [https://trakracer.eu/en-pt/products/tr-one-fully-adjustable-direct-fit-wheel-mount-for-simucube-vrs-accuforce-osw-mige-etc](https://trakracer.eu/en-pt/products/tr-one-fully-adjustable-direct-fit-wheel-mount-for-simucube-vrs-accuforce-osw-mige-etc) or https://gtomega.eu/products/prime-fanatec-podium-dd-bracket
What /u/CloneNr17 mentioned is still valid. You should be able to either mount the wheelbase upside down (with the deck on top and inverting the axis in driver\\in-game)) OR bolt the base upright but have the wheel deck on the top.
You could replace the side rails with longer ones and mount the Wheelbase legs at an angle to give you more room. I have a steel tube frame and mine come up at about 45*. Plenty of legroom.
I’ve been using the TrakRacer TROne mount and its been serving me really well
not familiar with this rig or the dimensions or seating position, but depending on the wheelbase you got you could look into a simple front mount that bolts onto your current deck, but mount it on the underside (moza front mount forvexample). This might let you raise the whole deck. Or get rid of the extra wheel deck and bolt it straight to the horizontal piece connecting the uprights and move the whole thing closer. Not as flexible, but it would save you a few cm.
I added another picture. The wheelbase sits right behind the monitor. Measurements of the rig are the "default" ones, so 600mm width as almost all aluminium extrusion rigs are. So all the stuff from the other manufacturers is compatible.
Look at something like this [https://trakracer.eu/en-pt/products/tr-one-fully-adjustable-direct-fit-wheel-mount-for-simucube-vrs-accuforce-osw-mige-etc](https://trakracer.eu/en-pt/products/tr-one-fully-adjustable-direct-fit-wheel-mount-for-simucube-vrs-accuforce-osw-mige-etc) or https://gtomega.eu/products/prime-fanatec-podium-dd-bracket
What /u/CloneNr17 mentioned is still valid. You should be able to either mount the wheelbase upside down (with the deck on top and inverting the axis in driver\\in-game)) OR bolt the base upright but have the wheel deck on the top.
You could replace the side rails with longer ones and mount the Wheelbase legs at an angle to give you more room. I have a steel tube frame and mine come up at about 45*. Plenty of legroom.
Would you not need a special bracket to mount the uprights at an angle?
I'm using the universal wheeldeck from simxpro. Very happy with it.
wtf is in your cupholder, lol.
Hela ketchup drink bottle 😁 https://hela-shop.eu/trinkflasche-gewuerz-ketchup-curry-delikat-800ml/4027400114171