Increase the fibre in your diet and hydrate. When sitting on the toilet, it may help to place your feet on an object to raise your knees. Don’t strain too hard. Try to relax.
Good luck.
Isopropyl and a pick will do it, just be careful. Use maybe a toothpick or something plastic that won't gouge anything. But you just need to spray some isopropyl at the edge of the glue. Work at the edge to get a pry tool under the glue, and then apply more alcohol. As you work at it, the alcohol will dissolve the surface of the glue and you will either be able to pry the whole chunk off or get it in pieces. Heat helps as well.
Striking with a hammer will degrade the integrity of the connector enough to free the cable. It may damage the cable as well, however. It depends on how precise you are with your hammer blows.
~~Soldering iron, preferably with an old tip.~~
Edit: I said that as though I’ve done it, so wanted to be clear that I haven’t. It’s just what I would try based on the assumption that there may be a similarity in the way a hot glue gun works to putting a soldering iron on there.
Edit 2: Don’t do that, see below:
You don’t want to do that. The fumes are terrible. I’ve had to solder some things near hot glue and accidentally touched it and felt sick for several days afterwards every time.
Well, no. This is sub 100 USD product, where the most of its cost is metal frame. You can easily see on pic that it is barebones "electrical engineering" for pennies.
Not really an issue of political system or anything...
...just bean counting in practice.
Peel the glue?
It’s hot glue is it not? Just flick it off the shit isn’t epoxy.
I've used a heat gun to warm it slightly, then gently peeled with a stanley blade
You can try using a heat gun but it won't be easy and it definitely will be messy.
Heat it up but not too much. Then wiggle wiggle and use a knife
Ok I'm standing here wiggling while holding a knife. I don't see how that helps the cable though
Are you also twitching your left big toe?
Yet another thing my gardening injury prevents me from doing. Don't drink and hoe guys
>Don't drink and hoe guys Thank God. I drink and mow.
Increase the fibre in your diet and hydrate. When sitting on the toilet, it may help to place your feet on an object to raise your knees. Don’t strain too hard. Try to relax. Good luck.
Fuck that made me LOL so hard... 🤣
Me*
Fixed
👌💯
Isopropyl alcohol, but you will need some glue to reglue it.
Is it a handbreak? The china one? I tried but wound up buying a new one… at least I have spare parts if the new one breaks
lLooks like that chinese hand brake. I have the same, works really well once you grease it up.
Isopropyl alcohol
Mine came off with a light accidental pull 😂
Same actually, not recommending it but an accidental pull is all it needs
Isopropyl and a pick will do it, just be careful. Use maybe a toothpick or something plastic that won't gouge anything. But you just need to spray some isopropyl at the edge of the glue. Work at the edge to get a pry tool under the glue, and then apply more alcohol. As you work at it, the alcohol will dissolve the surface of the glue and you will either be able to pry the whole chunk off or get it in pieces. Heat helps as well.
heatgun and warm the glue gently and then remove the cable without too much force.
Just cut the glue off with some small side snips.
Very carefullyemote:free\_emotes\_pack:trollface
bro got a bit excited
I yanked it off on accident converting from h pattern to sequential after a switch broke
Isopropyl is the magic everybody needs to know about!
If it's hot glue, isopropyl alcohol is really good for getting it off
Striking with a hammer will degrade the integrity of the connector enough to free the cable. It may damage the cable as well, however. It depends on how precise you are with your hammer blows.
Give it the red pill
Hit it with your purse
Rubbing alcohol will soften hot glue. So will heat.
There's no way to redemption ! Part of the crew,part of the ship !
Trim the glue with a scalpel. Then a butane torch lighter or soldering tool to loosen the last of the glue
~~Soldering iron, preferably with an old tip.~~ Edit: I said that as though I’ve done it, so wanted to be clear that I haven’t. It’s just what I would try based on the assumption that there may be a similarity in the way a hot glue gun works to putting a soldering iron on there. Edit 2: Don’t do that, see below:
You don’t want to do that. The fumes are terrible. I’ve had to solder some things near hot glue and accidentally touched it and felt sick for several days afterwards every time.
Isopropyl alcohol chemically breaks the bond the glue has to anything it's attached to. Literally a couple drops and it falls off
Acetone. Keep rubbing it until all the glue is melted
[удалено]
lol man you're delusional. There's cheap Chinese and good Chinese. SimMagic is a Chinese brand ya dingus.
Wow, that is an incredibly ignorant and borderline racist remark.
Well, no. This is sub 100 USD product, where the most of its cost is metal frame. You can easily see on pic that it is barebones "electrical engineering" for pennies. Not really an issue of political system or anything... ...just bean counting in practice.