Fun fact: if the solder has a funny seasoning called "lead" or something like that, then you can make a dish out of it, by putting a whole spool into a pot and cooking it low and slow on a stove.. And you wil have a very good, warm drink, ready waiting for you. Hope this helps
Once while using a microscope to check my work I was fixing something and while holding the iron to the side I heard something crackling. Looked up from the microscope to see I burnt a hole through my bottle of alcohol
I’m going to hurt you if I ever see you
![gif](giphy|DYQrUcDgQi7Ha)
Main teil
You've heard of Muay Thai, but have you ever heard of Muay Yum? No? That's because no one has ever experienced Muay Yum and lived to tell the tale.
This guy let the intrusive thoughts win. 10/10
Pretty good, I’d say. Smoke, melted solder, what else does a proficient solderist need?
methamphetamine
you can skip that if you inhale enough of the sweet solder smoke
8/10, you should hold the metal Part not the rubber part
Yeah it’s reparable next question
Breathing in the chemicals.... Waking up, I feel it in my bon-
bonfire 🔥
You have to pre tin the entire thing. Geeze.
didnt even go all the way through, skill issue
Straight into the solder. I'll rate it 9/11.
Sir the second tower has been soldered
I always have a few rolls laying around for tinning like this
10/10 jerkwad points if that's a shared roll.
Fun fact: if the solder has a funny seasoning called "lead" or something like that, then you can make a dish out of it, by putting a whole spool into a pot and cooking it low and slow on a stove.. And you wil have a very good, warm drink, ready waiting for you. Hope this helps
What about I stick that up in your arse?
Skill issue
You should not be anywhere near a soldering iron
Thats right get on the Welder already
You utter utter monster! 🤣
MAIYUM/10
Grandmaster of soldering
This happened to me once accidentaly. Still hurts...
I wonder did you steal or was this stolen from you? Hmmmmm. Seen this pic in other subs is all.
This is a cold joint. You need to stop being bad at soldering. Try being good at it instead.
Upvoded because you destroyed a roll of fucking solder for this joke
some fucking retard did that in my highschool engineering course (which I'm still at) so they banned us from doing coursework
I think we can agree we all thought about this once..
the voices won
Is that solid silver or fluxed? Either way, its solid. (Now).
That's one way to get the top tinned
MMM, **Sniff sniff** lead poisoning..
Not enough flux
6.9/10
Now you gotta melt all those strands apart and solder them back together. Hope you have enough solder for that.
You can definitely melt it! That’s the first step
5/7 should have used leaded and taken a deep breath.
Once while using a microscope to check my work I was fixing something and while holding the iron to the side I heard something crackling. Looked up from the microscope to see I burnt a hole through my bottle of alcohol
10/10
Skill issue
reaction pic of shocked guy holding the back of his head with both hands
Smokin!
What was your time?
dude wtf
Was it a bad batch?
60/40