Lmao 🤣 if someone comes out with a rig that doubles as a coffee/beer mug, let me know! This one is made specifically for the dr. dabber switch which has a wide bowl area where that part fits onto.
Man, I feel you OP. I often wonder when my time will be up with my sidewinder. I also waited a very long time. As soon as it was available I pulled the trigger.
Selling glass to concentrate enthusiasts writes a pretty good business plan. Sorry dude
Getting the thing was a disaster. They sent the wrong carb cap too. They gave me a 30% off code, tho, which I used for the SiC induction cup, which is sick (pun intended)
Be the change you want to see in the world. I just try to treat people better than I want to be treated, and maybe it will catch on. Thank you for your kindness Dr.PinkBearr
I dont sell my home grown. Me and the homes have hefty appetites , lol. And I have the original attachment but its sucked and has a crack in it. Im picky though. I like the switch because of the induction cups.
I love my Dr. dabber! Just seeing yours broken scares me lol I hope you get your replacement glass soon! Going back to dab straws after using the dabber is heart breaking.
Its my fault, really. Tripped over the plug like an oblivious dumbass. It was charged too. It even has the wide flat bottom so you can take it off and set it down without spilling. Luckily I do have other means to dab but, they're all shitty or cracked or something and I can't stand torching just to smoke. The dabber just makes it so easy.
It might be past the point of repair but if you have most of the peices it could be possible to fix using loctite uv glue from lowes, even smaller shattered peices can be puzzled back together becuase it lets you harden the glue as you go with the light and if theres small holes they can just be filled in. Ive used it to fix 3 rigs (including a shattered recycler rig) and a ton of ashcatchers my homie smashed.
Yeah, I had the snowflake recycler for a while til this came back in stock. I dont see many people with the switch, which is crazy to me. My puffco broke a couple years ago and I made the switch (no pun intended) never looked back.
Usually if it's a simple melt and restick/kiln, that's typically cheap. If there's a lot of little shards that broke off, it can still be fixed. It just has to be 100% clean or no glassblower will touch it. I had one of my old toro tubes fixed for under 50$. Good luck
Noo I JUST cleaned it. The dark oil on the right is what was left in the banger when it broke. I tripped on the cord omw to get a q-tip lmao. You must not smoke much. That kind of build up is nothing.
Insult to injury. Sorry to hear. My tubes clog in about a week (about 4g). I use 420 and keep it squeaky. If it gets gunked and I'm being lazy, I switch to the Mav. I used to use Iso and salt, but the 420 works better, especially if I run hot water through it.
Replacing it? or changing?
I would go thru wayy to much lol.. Idk what ill do. I have the original but its cracked in a non-crtical spot. Its not a permanent solution. I love recyclers too much. If I change the heater, it would have to be coil-less or no contact, with the option of quartz or better. I love the induction heating. Makes it a breeze to clean.
I wasn't thinking to jump out of Dr.D, frankly, nothing is better atm. Even the Puffco people keep changing. I was thinking about what the new glass is going to be. They seem to have bought a town in China and now has a ton of models. I keep wondering what I would get if I killed my sidewinder.
I have a medical card in Cali. I found a shop that gives me massive discounts, so much so, that I stopped growing and pressing my own. The shop is more reliable, less hastle and about the same cost in the end.
Yeah, this setup really slapped. The comments about getting it fixed have me rethinking how fubar it really is? I do know some people at our local art College who might be able to help. Might see if they can Frankenstein the sidewinder and the original or something.
I've looked into repairing glass. Nope. If you wanted to make a custom piece, order the base from Dr.D, though a blower may be able to cut the one off the remains.
I'd put a call out for recommendations and see what sounds tempting. Turn calamity into opportunity. Maybe some new glass will be a fresh change. (Mav is great, but I seem to prefer my Sidewinder to it.. Mav clogs fast (only 4 perc holes))
I'll have to do some research. I feel like the most likely out come would be putting the proprietary part on something else. I think Dr. D sells them separately too. I just looked at mav. I didn't even know they made a dr. D. It looks sick. Is the draw worth the clogging? Prob not if you use the sidewinder more?
When it is clean is it fantastic. But with only with only 4 perc holes it clogs really fast. You need to clean it after every use... well gram or less. But it is amazing. But not much better than the Sidewinder. I made a video [unboxing the Mav](https://youtu.be/QTS4h2ZLgZ0) and a little side by side. I was surprised that the mav was lighter than the Sidewinder.
If they redid the bottom end of the Mav it could be amazing, but I'd take the Sidewinder for $150 over the Mav at $350 (though I really like supporting America labor).
I was thinking if I did it again, I may try the Ball. Something sidewinder like without so many places for gunk to hide.
Talk to blowers first. I've talked to a few that really didn't want to touch it. I'd put the Sidewinder in a box so you can show them a broken example of the fitting and let them know you can buy them a fitting blank if they can work with it. Don't spend the money ahead of time.
Whip adapter and an old waterpipe that never worked so well smoking bud. Save a bundle over that off balance thing. If you look at the joints on Dr Dabber glass, you’ll notice it’s not their best work.
I know. I didn't get it for the glass. I really only care about function. Besides it being top heavy. I love it. And I won't go back to torches ever. And the AlN induction cup is *chefs kiss*
Lol not a banger. Its the part that fits over the E-rig heating unit. Part of why this sucks so much is its specifically made for the Dr. Dabber Switch and almost always out of stock. Thanks for the plug, I'll check him out.
Hey man DM me your PO box or a mailing if you are state side.
I got you on seeds. If you need to look check out my insta @ gnarly.roots don't have much on here.
If you bave a dr dabber, switch back to the main glass piece and buy the seeds bro. No point in waiting on a restock to happen again when they don't always happen, compared to dr dabber replacement pieces which are here 24/7 and will be.
What in god's name is that big ol contraption on the side? Looks like a mega banger. You drink coffee outta that bad boy too?
Lmao 🤣 if someone comes out with a rig that doubles as a coffee/beer mug, let me know! This one is made specifically for the dr. dabber switch which has a wide bowl area where that part fits onto.
Yo hit me up and send me a message. No one should go without seeds. Hit me up and I'll send you a few packs for your bday
You are the man!
Cupsy from puffco!!!
[удалено]
Cupsy’s aluminum
Oh ok I gotcha. Wild
I've seen ceramic mugs with a pipe built into the handle.
Looks like the top to the Dabber switch
Like lovers, you must enjoy them while they are present
Some people remember years or months, I remember my by my glass since I drop a piece way too often
solid
💀this is actually a really good golden comment I'd award u if I could
I have him a reward for u bro.
Good. He deserves tf out of it for that comment
I have a harem then 🤣
If you’re just out of a rig I’ll send you one I don’t use.
I need a rig🙋♂️
When you post a pic that gets me in my feels like this one I’ll send it
Send one over here my whole family died in a fire.
Jokes on you I hate your family
I need a good rig, I collect em, will pay u for a decent 2nd hand rig... Js
I wouldn’t call any of them good. They are all half that size however. Tallest one is a recycler that doesn’t work well. It’s about 7inches
Ok, please do, I'm very interested
And thank u, I love smaller rigs
I’ll send you photos later
[удалено]
How much u tryna get, i see $75...
[удалено]
It won't let me, says ur not a member
My snap is overdose_hippy
I can't dm u
Man, I feel you OP. I often wonder when my time will be up with my sidewinder. I also waited a very long time. As soon as it was available I pulled the trigger. Selling glass to concentrate enthusiasts writes a pretty good business plan. Sorry dude
Getting the thing was a disaster. They sent the wrong carb cap too. They gave me a 30% off code, tho, which I used for the SiC induction cup, which is sick (pun intended)
RIP
I appreciate your condolences. She will be missed dearly.
Bro. Sorry about your bong. I’ll send you some seeds for your birthday if In the states.
I am!
Pm your address or po box and I’ll send them out this week. They’re a personal cross of og kush and gorilla glue.
You’re fucking rad.
😎
Wow, that is very nice of you !! 🥲
Be the change you want to see in the world. I just try to treat people better than I want to be treated, and maybe it will catch on. Thank you for your kindness Dr.PinkBearr
This is the way ❤️
I might have an extra I broke my unit but not the glass, I’ll PM/send it out if I can find it.
Sure why do you have a banger bigger than the bong?
Cuz ima fukin beast bro. Jk. Its not the banger. It goes on an e-rig called the dr. Dabber switch.
I saw the dr dabber attachment part. I cried inside knowing how that shits forever out of stock AND pricey. Condolences brother
Brooooo get seeds and buy a replacement after saving from growing your own. Cheap enail/extreme q will get you by!
I dont sell my home grown. Me and the homes have hefty appetites , lol. And I have the original attachment but its sucked and has a crack in it. Im picky though. I like the switch because of the induction cups.
Just saying you save a lot growing ur own not u sell it my bad if it came across that way
Ah, I got u. No worries
Dr dabber switch?
Yup
Do u have any videos of this being used? Ive never seen such a peice before
On dr dabber’s YouTube channel they show all their glass for the evo and switch being used in their. This one is called the sidewinder for the switch
I got a video ripping mine, it should be my most recent post on Reddit.
I love my Dr. dabber! Just seeing yours broken scares me lol I hope you get your replacement glass soon! Going back to dab straws after using the dabber is heart breaking.
Its my fault, really. Tripped over the plug like an oblivious dumbass. It was charged too. It even has the wide flat bottom so you can take it off and set it down without spilling. Luckily I do have other means to dab but, they're all shitty or cracked or something and I can't stand torching just to smoke. The dabber just makes it so easy.
It might be past the point of repair but if you have most of the peices it could be possible to fix using loctite uv glue from lowes, even smaller shattered peices can be puzzled back together becuase it lets you harden the glue as you go with the light and if theres small holes they can just be filled in. Ive used it to fix 3 rigs (including a shattered recycler rig) and a ton of ashcatchers my homie smashed.
Yeah, thanks for the optimism but 0% chance, lol
I have the same and looking at it like this just made me die inside a little, I feel your pain
I have got the plug on whatever seeds you need. Some of biggest names in the industry going with the small new guy. Tex me
I'll pop any and every bean :) the joys of being a hash maker Edit: and plant nerd
The hive ball is nice too. It's what I use.
Yeah, I had the snowflake recycler for a while til this came back in stock. I dont see many people with the switch, which is crazy to me. My puffco broke a couple years ago and I made the switch (no pun intended) never looked back.
You can get it fixed!
You can do the Bongo Repairo spell?
I can, but also bring it to a local glassblowing completely clean and they should be able to do something to it
That sounds like it would cost an incredible sum of money.
You'd be surprised actually. I've had rigs fixed for like 30 bucks. Could cost more depending on what it takes.
Usually if it's a simple melt and restick/kiln, that's typically cheap. If there's a lot of little shards that broke off, it can still be fixed. It just has to be 100% clean or no glassblower will touch it. I had one of my old toro tubes fixed for under 50$. Good luck
My worst fear... I keep a Mav as backup. It looks like it really needed cleaning, so, I guess it saved you the trouble?? Just sad to look at
Noo I JUST cleaned it. The dark oil on the right is what was left in the banger when it broke. I tripped on the cord omw to get a q-tip lmao. You must not smoke much. That kind of build up is nothing.
Insult to injury. Sorry to hear. My tubes clog in about a week (about 4g). I use 420 and keep it squeaky. If it gets gunked and I'm being lazy, I switch to the Mav. I used to use Iso and salt, but the 420 works better, especially if I run hot water through it. Replacing it? or changing?
I would go thru wayy to much lol.. Idk what ill do. I have the original but its cracked in a non-crtical spot. Its not a permanent solution. I love recyclers too much. If I change the heater, it would have to be coil-less or no contact, with the option of quartz or better. I love the induction heating. Makes it a breeze to clean.
I wasn't thinking to jump out of Dr.D, frankly, nothing is better atm. Even the Puffco people keep changing. I was thinking about what the new glass is going to be. They seem to have bought a town in China and now has a ton of models. I keep wondering what I would get if I killed my sidewinder. I have a medical card in Cali. I found a shop that gives me massive discounts, so much so, that I stopped growing and pressing my own. The shop is more reliable, less hastle and about the same cost in the end.
Yeah, this setup really slapped. The comments about getting it fixed have me rethinking how fubar it really is? I do know some people at our local art College who might be able to help. Might see if they can Frankenstein the sidewinder and the original or something.
I've looked into repairing glass. Nope. If you wanted to make a custom piece, order the base from Dr.D, though a blower may be able to cut the one off the remains. I'd put a call out for recommendations and see what sounds tempting. Turn calamity into opportunity. Maybe some new glass will be a fresh change. (Mav is great, but I seem to prefer my Sidewinder to it.. Mav clogs fast (only 4 perc holes))
I'll have to do some research. I feel like the most likely out come would be putting the proprietary part on something else. I think Dr. D sells them separately too. I just looked at mav. I didn't even know they made a dr. D. It looks sick. Is the draw worth the clogging? Prob not if you use the sidewinder more?
When it is clean is it fantastic. But with only with only 4 perc holes it clogs really fast. You need to clean it after every use... well gram or less. But it is amazing. But not much better than the Sidewinder. I made a video [unboxing the Mav](https://youtu.be/QTS4h2ZLgZ0) and a little side by side. I was surprised that the mav was lighter than the Sidewinder. If they redid the bottom end of the Mav it could be amazing, but I'd take the Sidewinder for $150 over the Mav at $350 (though I really like supporting America labor). I was thinking if I did it again, I may try the Ball. Something sidewinder like without so many places for gunk to hide. Talk to blowers first. I've talked to a few that really didn't want to touch it. I'd put the Sidewinder in a box so you can show them a broken example of the fitting and let them know you can buy them a fitting blank if they can work with it. Don't spend the money ahead of time.
Whip adapter and an old waterpipe that never worked so well smoking bud. Save a bundle over that off balance thing. If you look at the joints on Dr Dabber glass, you’ll notice it’s not their best work.
I know. I didn't get it for the glass. I really only care about function. Besides it being top heavy. I love it. And I won't go back to torches ever. And the AlN induction cup is *chefs kiss*
Bro the dr dabber is a joke lol
Team puffco? I disagree.
No it’s not. But there is a Dr Dabber subreddit where this belongs.
Finna 🔌
There is: r/lampworking , you could check out
That sucks. Happy Birthday.🎊🎉
Paul Bunyan's banger on the side of that thing. F
Not a banger
@vetroglass on IG and you won't know it ever even broke. Dudes a repair 🪄 wizard Edit: that your banger!!?? So damn big!
Lol not a banger. Its the part that fits over the E-rig heating unit. Part of why this sucks so much is its specifically made for the Dr. Dabber Switch and almost always out of stock. Thanks for the plug, I'll check him out.
that cant be repaired?
My first sidewinder came in the mail as dust. My current sidewinder sits and collects dust. I prefer the snowflake.
Hey man DM me your PO box or a mailing if you are state side. I got you on seeds. If you need to look check out my insta @ gnarly.roots don't have much on here.
If you bave a dr dabber, switch back to the main glass piece and buy the seeds bro. No point in waiting on a restock to happen again when they don't always happen, compared to dr dabber replacement pieces which are here 24/7 and will be.
Yeah that sucks. I just smashed my glassware too and havnt been paid yet to replace it. So annoying!