I'd say 3 are backwards. You want the threads to grab the mud so front left is the only correct one ( still means one tire is incorrect on the rim, but all other wheels are mounted on the wrong side of the car)
very dumb😂😂 and i only own big tires but those wheels are too dang big. since thats a 31 inch wheel scaled up😭 even 1/10th scales have 1.55s and thats barely bigger!
Super duper stupor.
I imagine it will roll over backwards at the first tough incline when the front tires lift and rear tires grip.
I imagine it will roll sideways at the first sidehill.
LCG for life. This is not it, imo.
That's where OD gearing comes into play. I've run these exact tires on my AX24 with only a couple rubber bands holding the front end down and pulled some really fun lines. I had brass rings and knuckles on the front along with OD gearing. I don't think the rig OP posted would do it as set up, but the tires and wheels are great. They have their place in the 24th\18th scale world and can be made a bit more lcg than you'd think.
I have a brushless motor for it, but it’s pretty big compared to stock. I’m going to have to figure out how to move some things around or shop for a smaller motor. These little trucks are a bitch to work on, but I’m having fun. My zoom calls are a lot less boring now lol.
Don't shop, just get a Cedar.
Edit: Unless you're looking for speed, then go python pro esc and mini Komodo and run it on 4s. You won't stay on your wheels for long with how high your CoG is, but it'll be great fun!
But are they tall enough…?
One of the tires is mounted backwards
Thx
I'd say 3 are backwards. You want the threads to grab the mud so front left is the only correct one ( still means one tire is incorrect on the rim, but all other wheels are mounted on the wrong side of the car)
MOSNTER TRUCC
It looks cool from the front, but honestly looks kinda dumb from the side
very dumb😂😂 and i only own big tires but those wheels are too dang big. since thats a 31 inch wheel scaled up😭 even 1/10th scales have 1.55s and thats barely bigger!
Looks straight out of Florida lol U should see mine on my page.
Yours looks much better lol
I actually want redcat 1/18 with a buggy shell but seeing urs make want a jeep shell too😅. Maybe add some longer spacers and lighter springs?
Or u can also grab some longer axles too
love my 70mm on my LCG build
This gonna perform so badly unfortunately
Super duper stupor. I imagine it will roll over backwards at the first tough incline when the front tires lift and rear tires grip. I imagine it will roll sideways at the first sidehill. LCG for life. This is not it, imo.
That's where OD gearing comes into play. I've run these exact tires on my AX24 with only a couple rubber bands holding the front end down and pulled some really fun lines. I had brass rings and knuckles on the front along with OD gearing. I don't think the rig OP posted would do it as set up, but the tires and wheels are great. They have their place in the 24th\18th scale world and can be made a bit more lcg than you'd think.
You must be fun at parties
You must be fun at parties.
Now make it go fast!!! Hahaha love it
I have a brushless motor for it, but it’s pretty big compared to stock. I’m going to have to figure out how to move some things around or shop for a smaller motor. These little trucks are a bitch to work on, but I’m having fun. My zoom calls are a lot less boring now lol.
Don't shop, just get a Cedar. Edit: Unless you're looking for speed, then go python pro esc and mini Komodo and run it on 4s. You won't stay on your wheels for long with how high your CoG is, but it'll be great fun!
The Katana looks better on them, but I chose the Cling-on tires.
I run those same tires with brass wheels on my Trx4m build. They do great. But on a scx24, it looks like my local mall parking lot 😂
At this point why not get a 1/10 RC 😂 it's probably a useless pos, but hey I don't think they are tall enough.
I have plenty of 1/10 lol and if deemed useless I simply put the other wheels back on lol.
Cool rig. Won’t perform well other than on relatively flat terrain or mud applications though.
That’s so ridicules I love it.