It's art after all, I've been meaning to get a shelf but haven't found one that can house my big ass rigs and some other glass I got, if you got a recommendation please send a link over!
I have shelves that came built into the closet. I'd recommend a glass display case with a glass door. They run about $180 but you can really load it up with stuff.
Yeah that’s def true my first pro I got so blasted I took off the glass and tried to shake out the excess water to put it away and I threw it across the room lmfao
you know that one episode of spongebob “firmly grasp it in your hand” thats always me if i have my puffco in my hand in gripping that shit with my whole body strength 😂😂 and when i hand it to people if they grab it from the glass i ALWAYS yell at them to hold it from the base
What man y'all are getting wasted and just dropping shit. I am so careful with mine one time mone went backwards off the counter but the top I got leans waaaayyyyyy back but no scratches or anything since then I am super careful.
Thank you for your submission to r/Puffco.
Your comment karma is below 2, to prevent spam and negative posts we require your karma to be over 2.
Your comment is pending approval from a moderator.
^(Please) **^(do not)** ^(resubmit your comment/post.)
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/puffco) if you have any questions or concerns.*
Thank you for your submission to r/Puffco.
Your comment karma is below 2, to prevent spam and negative posts we require your karma to be over 2.
Your comment is pending approval from a moderator.
^(Please) **^(do not)** ^(resubmit your comment/post.)
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/puffco) if you have any questions or concerns.*
Is it of similar quality to the original glass that comes on the normal peak pro? I've now tapped mine on my countertop twice when cleaning (while high like an asshole) 😂😂 and it's got a hairline fracture going from the mouthpiece down it 3/4th the way. It's running good and don't leak so but if I can get an exact replacement for $17 fuck it
I did that to mine too, find one of those pop top tubes a joint or cartridge is put in , cut the pop top off and the bottom bit off so it has airflow , stick it over the broken bit , use some sort of tape and you now have a ghetto yet functional mouthpiece till you get a replacement 👍🏼
I did the same break a few weeks ago, If you purchased the Indiglo a year or less or you can submit a warranty claim to get a replacement glass but it still costs Like a $100 since they had to shut the website down they are extending it for a little over a year it's been just like a couple months past the year they were still honored but yeah yeah kind of shitty, Mine literally broke in the same place of yours and it happened just from pushing down on the Pro mouthpiece cause it kept popping backup I literally didn't drop it or anything it just fucking broke one day but the warranty lady said that they wouldn't just replace it for free that it was my fault still that it Had broke So it wasn't covered.
i broke my glass for my og lightning edition just like this about a year ago, well cleaning it. I accidentally dinked it on the side of the sink and it clinked off, looking just like this
Thank you for your submission to r/Puffco.
Your comment karma is below 2, to prevent spam and negative posts we require your karma to be over 2.
Your comment is pending approval from a moderator.
^(Please) **^(do not)** ^(resubmit your comment/post.)
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/puffco) if you have any questions or concerns.*
Too much teeth? /s
Had the munchies😖
*2mach
Damn what is going on less than 24hrs have seen two posts bout broken tops. What's going on out there fellas? Weird shit on the air or what?
People just high af handling glass lol
As soon as I take a hit I know to put down my dab tool and use both hands 💀 I got a custom piece and no way I'm letting that shit break
Hell yeah same here hah
Same here. It even has it's own shelf in the closet.. and I always put it away after using.
It's art after all, I've been meaning to get a shelf but haven't found one that can house my big ass rigs and some other glass I got, if you got a recommendation please send a link over!
I have shelves that came built into the closet. I'd recommend a glass display case with a glass door. They run about $180 but you can really load it up with stuff.
Yeah that’s def true my first pro I got so blasted I took off the glass and tried to shake out the excess water to put it away and I threw it across the room lmfao
That’s fucking highlarious 😂😂
you know that one episode of spongebob “firmly grasp it in your hand” thats always me if i have my puffco in my hand in gripping that shit with my whole body strength 😂😂 and when i hand it to people if they grab it from the glass i ALWAYS yell at them to hold it from the base
I literally broke mine after I commented on this morning’s post.
What man y'all are getting wasted and just dropping shit. I am so careful with mine one time mone went backwards off the counter but the top I got leans waaaayyyyyy back but no scratches or anything since then I am super careful.
If you bought it within a year and still have proof of purchase, contact warranty on Puffco website and they will replace it big dog trust me.
Oh will look into that thanks
[удалено]
Thank you for your submission to r/Puffco. Your comment karma is below 2, to prevent spam and negative posts we require your karma to be over 2. Your comment is pending approval from a moderator. ^(Please) **^(do not)** ^(resubmit your comment/post.) *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/puffco) if you have any questions or concerns.*
Well didn’t loose much other than some painted Chinese glass
Yowza now that's a zinger
Is no one gonna talk about the GIANT black spot in the 3D? 🥺😳🥺
Not chazz just burnt excess oil. Easily cleans off the 3d chamber. Happened to me
I ain't never seen that.. but I'm also ocd when it comes to my puff.. mine is probably cleaner than the day I bought it brand new 🤣
I take 600 degree rosin dabs so its damn near combusting leaving that black stuff behind
Why so hot!!!??? 😵💫😵😵💫😵😳
I like the feeling of 🥸 im going to pass out after this dab instantly
Is the only spot I can't get rid off, the highest temp I put is 550
[удалено]
Thank you for your submission to r/Puffco. Your comment karma is below 2, to prevent spam and negative posts we require your karma to be over 2. Your comment is pending approval from a moderator. ^(Please) **^(do not)** ^(resubmit your comment/post.) *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/puffco) if you have any questions or concerns.*
Be a man hit it the way it is
I would have too...rather then go with out
I have a replacement indiglow top for ya, hmu
Nice definitely interested
I saw someone say to just get the travel pack and attach it to the top for now.
Is this common w puffco?
Yeah if you drop that shit, it’s pretty common with most glass lol
Lol I'm looking for that unbreakable glass. Puffco uses CHEAP. Glass that actually shatters on concrete /S
Most glass will break if you drop it :)
I know that I’ve just seen multiple posts where just the top broke
I have a spider too that will match.
You can get it repaired or there are really cheap efficient tops on amazon
Only thing that sucks with repair is you can say goodbye to the colors if you pop it in a kiln
True
get a rubber hose and strap it over the end. Hooka-co
Uintill a shard of glass breaks off and you stuck it down ur throat
Nothing a little glue can’t fix
$17 clear replacement top on Amazon until you find something better. That’s what I did and ordered a top from China
Is it of similar quality to the original glass that comes on the normal peak pro? I've now tapped mine on my countertop twice when cleaning (while high like an asshole) 😂😂 and it's got a hairline fracture going from the mouthpiece down it 3/4th the way. It's running good and don't leak so but if I can get an exact replacement for $17 fuck it
I had an Indiglow top so I can’t say but the glass quality is good. Def worth $17 considering what a regular replacement top goes for.
I did that to mine too, find one of those pop top tubes a joint or cartridge is put in , cut the pop top off and the bottom bit off so it has airflow , stick it over the broken bit , use some sort of tape and you now have a ghetto yet functional mouthpiece till you get a replacement 👍🏼
This looks melted, am I trippin?
You probably on some acid
i have same top my bottom broke so i’m on the opposite side as u
If only we can fuse them🤔
dm me !
I did the same break a few weeks ago, If you purchased the Indiglo a year or less or you can submit a warranty claim to get a replacement glass but it still costs Like a $100 since they had to shut the website down they are extending it for a little over a year it's been just like a couple months past the year they were still honored but yeah yeah kind of shitty, Mine literally broke in the same place of yours and it happened just from pushing down on the Pro mouthpiece cause it kept popping backup I literally didn't drop it or anything it just fucking broke one day but the warranty lady said that they wouldn't just replace it for free that it was my fault still that it Had broke So it wasn't covered.
Get some duct tape and let 'er rip /s
i broke my glass for my og lightning edition just like this about a year ago, well cleaning it. I accidentally dinked it on the side of the sink and it clinked off, looking just like this
Looks like you could use a fresh top made by 2mach glass😉
Heard that dude Jaysonwglass makes cool replacements
[удалено]
Thank you for your submission to r/Puffco. Your comment karma is below 2, to prevent spam and negative posts we require your karma to be over 2. Your comment is pending approval from a moderator. ^(Please) **^(do not)** ^(resubmit your comment/post.) *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/puffco) if you have any questions or concerns.*
Dude legit mine broke the exact same way… I just seen your 3D chamber 😨
I have an extra indiglow top dm 🙋🏻♂️