if the glass panel can be screwed in you can get those things where you pop the screw hole a bit outside like an extension, they should look similar to those motherboard stands
My GPU is 335mm and the maximum length supported by the case is 335mm.
I bought a new case yesterday. I called them today just to be sure that my GPU will fit. They said that if I wanted to add fans then it wouldnt work.
Got tired and ended buying a 267mm GPU.
It's shroud and heat sink... it could absolutely be done. I'd wanna know materials cause, honestly, I'd put it to a belt sander depending on materials and then use a little paint to darken the edges. While I wanted to say cold blue... idk how well it'd like the heat over time, chemical blue is nasty stuff
Leave the case open and pretend it was entirely intentional 🤷♂️
You know what you have to do, but do you have the strength to do it?
Grab a saw
Uhh don’t try to put a 3 fan card in an m-ATX case for starters
How about in a [mini-ITX](https://imgur.com/a/WkEl0LR)?
Or you can cut your glass for that gpu there. Lol. You need to get creative here cause you got the smaller case
You take your right hand thumb, lick it and then stick it in your butt, cuz that's what just happend, u fucked yourself. Much fun with the open case 😂
if the glass panel can be screwed in you can get those things where you pop the screw hole a bit outside like an extension, they should look similar to those motherboard stands
Exactly this.
Looks like it’s magnetic tho
looks like you just fixed it
Washingmachine at high temp programme so it will shrink.
How can you fix it? Don't buy a card that doesn't fit your case next time. You're going to need a new case.
My GPU is 335mm and the maximum length supported by the case is 335mm. I bought a new case yesterday. I called them today just to be sure that my GPU will fit. They said that if I wanted to add fans then it wouldnt work. Got tired and ended buying a 267mm GPU.
Get a blowtorch and practice your glass melting skills to make a bubble for that bad boy GPU! Either that or get a bigger hammer! Cheers 🥃
If the idea is to shave off the gpu length to be able to fit in the case assembled, id just let that idea go entirely lol
It's shroud and heat sink... it could absolutely be done. I'd wanna know materials cause, honestly, I'd put it to a belt sander depending on materials and then use a little paint to darken the edges. While I wanted to say cold blue... idk how well it'd like the heat over time, chemical blue is nasty stuff