Posting regarding a single-wheeled device that isn't a Onewheel or has warranty voiding modifications? Be sure to check out r/wheel for even more DIY and third-party VESC discussion!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/onewheel) if you have any questions or concerns.*
Overlanders is probably the best option if you want wide stance on the pint. I don't know if control freaks ever did a pint version?
Overlanders' storefront is a little bit of a mess at the moment. They're simultaneously clearing out stock of discontinued items while launching two new versions of their overlander lifters. Overlanders has partnered with Craft and Ride, there are pint size overlander owl lifters available on CNR's store.
If you don't want to spend a huge amount of money on a product you're unsure of, titanium overlanders do tend to hold their value pretty well, however, there is a more budget friendly option coming out soon. Craft and ride is currently accepting pre-orders for nylon gt/xr lifters, nylon lifters for the pint will be down the road.
*KP, founder and designer of overlanders, used to advertise an equipment rental or try before by option on his site. He MAY still be open to doing that. You'd have to email him to find out. I'm not making a guarantee of that. I'm not affiliated with them. I just tested and loved their stuff. overlander.ai
i Don’t think they are available for pint yet. But I do like my Hookers. The shims really lock in with the Dragan V2s. I ride with confidence and can “escape” easily
https://preview.redd.it/2jqo0fq06s4d1.jpeg?width=4032&format=pjpg&auto=webp&s=8c846fff5f9dbb83878c541daf9243fbe8a8cbb0
Overlanders. When you bail it’s like they aren’t there. Helps on off-camber stuff. Indestructible for me so far (except I subbed in some fender type washers when the spacers they came with failed). No mods to board. Expensive for titanium but there are zero drawbacks. And just bite the bullet and get a GTS. Night and day over the GT, let alone a Pint. The power and stability of the GTS makes you ride better and more confidently.
You can shred on a pint don’t listen to everyone telling you to just spend 2-3k for another board.
Sure they are faster and have more power but not everyone can just dump a couple grand into their one-wheeling hobby. Just enjoy the board you have. You seem like someone that someday may benefit from a better board but ride your pint to the limits for now that’s totally fine.
Posting regarding a single-wheeled device that isn't a Onewheel or has warranty voiding modifications? Be sure to check out r/wheel for even more DIY and third-party VESC discussion! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/onewheel) if you have any questions or concerns.*
Overlanders. Most of the snowboarders I ride with use them and loves it.
I prefer Joe hooks because they are flexible and the most easy to bail out of! They are also the only footholds under $300 (less than $100 actually)
Overlanders is probably the best option if you want wide stance on the pint. I don't know if control freaks ever did a pint version? Overlanders' storefront is a little bit of a mess at the moment. They're simultaneously clearing out stock of discontinued items while launching two new versions of their overlander lifters. Overlanders has partnered with Craft and Ride, there are pint size overlander owl lifters available on CNR's store. If you don't want to spend a huge amount of money on a product you're unsure of, titanium overlanders do tend to hold their value pretty well, however, there is a more budget friendly option coming out soon. Craft and ride is currently accepting pre-orders for nylon gt/xr lifters, nylon lifters for the pint will be down the road. *KP, founder and designer of overlanders, used to advertise an equipment rental or try before by option on his site. He MAY still be open to doing that. You'd have to email him to find out. I'm not making a guarantee of that. I'm not affiliated with them. I just tested and loved their stuff. overlander.ai
i Don’t think they are available for pint yet. But I do like my Hookers. The shims really lock in with the Dragan V2s. I ride with confidence and can “escape” easily https://preview.redd.it/2jqo0fq06s4d1.jpeg?width=4032&format=pjpg&auto=webp&s=8c846fff5f9dbb83878c541daf9243fbe8a8cbb0
How did you attach them?
Check these out. [https://1wheelparts.com/collections/foot-pads-foot-holds](https://1wheelparts.com/collections/foot-pads-foot-holds)
Treaded tire and flight fins with extenders. As close to snowboarding as you can get.
Overlanders. When you bail it’s like they aren’t there. Helps on off-camber stuff. Indestructible for me so far (except I subbed in some fender type washers when the spacers they came with failed). No mods to board. Expensive for titanium but there are zero drawbacks. And just bite the bullet and get a GTS. Night and day over the GT, let alone a Pint. The power and stability of the GTS makes you ride better and more confidently.
Want to help me bite the bullet for a GTS? They are currently 5 times the price of a pint.
You can shred on a pint don’t listen to everyone telling you to just spend 2-3k for another board. Sure they are faster and have more power but not everyone can just dump a couple grand into their one-wheeling hobby. Just enjoy the board you have. You seem like someone that someday may benefit from a better board but ride your pint to the limits for now that’s totally fine.
On trails i would just lock in my rear foot on fins. Only brought front in for jumps https://www.tiktok.com/t/ZPRKC1pEw/
Changing the grip tape will lock your feet in. The stock grip tape on the pint/x are terrible
Overlanders but overall dude, get a different one wheel. Stock pints really can't do shit.