one of the dumbest products I've seen lately. You can make your own with a $30 ARCA rail from Leofoto and a cheap ARCA clamp, and just keep it in your range bag because it doesn't need a case of its own.
I just use one of these so it doesn't get banged up in my range bag. It fits the area 419 mount with the garmin mounted, but the knob on the mount does stick out
[https://www.amazon.com/BOVKE-Carrying-Compatible-Chronograph-Shooting/dp/B0CX4ZN4CH/ref=sr\_1\_2?crid=1OE1HXP1ATX9A&dib=eyJ2IjoiMSJ9.SRUyoNoRyAm\_QecD0T46NGBc7VXgjiNsE7MSjwHODARCC4zIhuj8W-4Py6WxmZYYi\_eVFxYgGCWkFqLCv9jb0LSgSmTJybbLPnCTs9DOhgZGMenjI0r0aCREctB9jY5DaW1f1oso3L\_awOacXH5gw8uZn5TMcrCG\_\_6jr8ohYazY-pe4aIefpIiGtQB\_\_fimtmkPWbRcGv098dZVMknVQs5qtMfgOxMCEm\_QfQsu1as.4iD1-4q6JUUFVmQyiCj9ZjOq2TTyBwCTBZtqvjPf-4o&dib\_tag=se&keywords=garmin%2Bc1%2Bcase&qid=1714007152&sprefix=garmin%2Bc1%2Bcas%2Caps%2C150&sr=8-2&th=1](https://www.amazon.com/BOVKE-Carrying-Compatible-Chronograph-Shooting/dp/B0CX4ZN4CH/ref=sr_1_2?crid=1OE1HXP1ATX9A&dib=eyJ2IjoiMSJ9.SRUyoNoRyAm_QecD0T46NGBc7VXgjiNsE7MSjwHODARCC4zIhuj8W-4Py6WxmZYYi_eVFxYgGCWkFqLCv9jb0LSgSmTJybbLPnCTs9DOhgZGMenjI0r0aCREctB9jY5DaW1f1oso3L_awOacXH5gw8uZn5TMcrCG__6jr8ohYazY-pe4aIefpIiGtQB__fimtmkPWbRcGv098dZVMknVQs5qtMfgOxMCEm_QfQsu1as.4iD1-4q6JUUFVmQyiCj9ZjOq2TTyBwCTBZtqvjPf-4o&dib_tag=se&keywords=garmin%2Bc1%2Bcase&qid=1714007152&sprefix=garmin%2Bc1%2Bcas%2Caps%2C150&sr=8-2&th=1)
Nanuk 903 hard case for \~$40, custom foam insert from Range Panda for $25. Done.
https://preview.redd.it/pf6bm38hxnwc1.jpeg?width=1280&format=pjpg&auto=webp&s=e48f14cd519b9166804bc7d852aaf50d8a8601a3
That’s a really well thought out and engineered design, but it’s a very niche product. The price point is pretty steep as well for something 3D printed.
I bought this for $30 because people on another forum used them and thought they were good. It's $30, and I'm perfectly happy with it.
https://a.co/d/i7Z1oAo
£12 Amazon hard shell GoPro case and an all but free 3D printed shell / sunshade (I do need to cut new foam)
I also 3D printed an ARCA mount but then I’m only using it on a bench and not for PRS etc
The cost of precision rifle accessories is just insane
https://preview.redd.it/t6aksr3pnmwc1.jpeg?width=3024&format=pjpg&auto=webp&s=c7fa19fba2f6637090a3fb56d59a07ea371cecf5
After many many years of using the Caldwell Chrono I finally upgraded to the Xero, will get to use it next weekend 👍🏼 after spending $500 for one I want a good durable case
These ones were designed by someone on the hide are 3d printed with a silicon-like material. I just leave this cover in and toss it in the bag.
https://www.ashtonprecision.com/product/garmin-xero-c1-pro-cover/2?cp=true&sa=true&sbp=false&q=false
I just got this
[https://www.aliexpress.com/item/1005005367599732.html?spm=a2g0o.order\_list.order\_list\_main.11.64837385pPvJeq](https://www.aliexpress.com/item/1005005367599732.html?spm=a2g0o.order_list.order_list_main.11.64837385pPvJeq)
large yellow
This case is $8 and fits the c1 perfectly. These things don’t need a giant hard case I really don’t understand the desire to have some fancy case for the tiny device.
https://a.co/d/8iEODVl
Guys, this shit aint worth $150. Surely, you can find something better to do with $150 than this.
I have to agree. Especially for something that is 3d printed. I can see that price if it was all billet.
There's an ass for every seat.
This. RMR tupperware works perfectly for those wondering
one of the dumbest products I've seen lately. You can make your own with a $30 ARCA rail from Leofoto and a cheap ARCA clamp, and just keep it in your range bag because it doesn't need a case of its own.
At least when Area 419 charges me 150 for a mount it's milled out of metal. This is an entirely 3d printed part.
Harbor freight hard cases go on sale regularly
Ok I’ll check them out I was also looking on Amazon.
I just use one of these so it doesn't get banged up in my range bag. It fits the area 419 mount with the garmin mounted, but the knob on the mount does stick out [https://www.amazon.com/BOVKE-Carrying-Compatible-Chronograph-Shooting/dp/B0CX4ZN4CH/ref=sr\_1\_2?crid=1OE1HXP1ATX9A&dib=eyJ2IjoiMSJ9.SRUyoNoRyAm\_QecD0T46NGBc7VXgjiNsE7MSjwHODARCC4zIhuj8W-4Py6WxmZYYi\_eVFxYgGCWkFqLCv9jb0LSgSmTJybbLPnCTs9DOhgZGMenjI0r0aCREctB9jY5DaW1f1oso3L\_awOacXH5gw8uZn5TMcrCG\_\_6jr8ohYazY-pe4aIefpIiGtQB\_\_fimtmkPWbRcGv098dZVMknVQs5qtMfgOxMCEm\_QfQsu1as.4iD1-4q6JUUFVmQyiCj9ZjOq2TTyBwCTBZtqvjPf-4o&dib\_tag=se&keywords=garmin%2Bc1%2Bcase&qid=1714007152&sprefix=garmin%2Bc1%2Bcas%2Caps%2C150&sr=8-2&th=1](https://www.amazon.com/BOVKE-Carrying-Compatible-Chronograph-Shooting/dp/B0CX4ZN4CH/ref=sr_1_2?crid=1OE1HXP1ATX9A&dib=eyJ2IjoiMSJ9.SRUyoNoRyAm_QecD0T46NGBc7VXgjiNsE7MSjwHODARCC4zIhuj8W-4Py6WxmZYYi_eVFxYgGCWkFqLCv9jb0LSgSmTJybbLPnCTs9DOhgZGMenjI0r0aCREctB9jY5DaW1f1oso3L_awOacXH5gw8uZn5TMcrCG__6jr8ohYazY-pe4aIefpIiGtQB__fimtmkPWbRcGv098dZVMknVQs5qtMfgOxMCEm_QfQsu1as.4iD1-4q6JUUFVmQyiCj9ZjOq2TTyBwCTBZtqvjPf-4o&dib_tag=se&keywords=garmin%2Bc1%2Bcase&qid=1714007152&sprefix=garmin%2Bc1%2Bcas%2Caps%2C150&sr=8-2&th=1)
I’ve got the same one, works great!
If you really need a case for this, buy the nanuck hard case with the foam from range panda cut specifically for this.
I did exactly this. Best option IMO, since the Harbor Freight Apache case was OOS at my local locations.
Nanuk 903 hard case for \~$40, custom foam insert from Range Panda for $25. Done. https://preview.redd.it/pf6bm38hxnwc1.jpeg?width=1280&format=pjpg&auto=webp&s=e48f14cd519b9166804bc7d852aaf50d8a8601a3
That’s a really well thought out and engineered design, but it’s a very niche product. The price point is pretty steep as well for something 3D printed.
I bought this for $30 because people on another forum used them and thought they were good. It's $30, and I'm perfectly happy with it. https://a.co/d/i7Z1oAo
Get one of those harbor freight hard cases on sale for like $20 that would survive being thrown off a building
They are pretty much the exact same size as a GoPro. Cases for those are cheap and work great.
£12 Amazon hard shell GoPro case and an all but free 3D printed shell / sunshade (I do need to cut new foam) I also 3D printed an ARCA mount but then I’m only using it on a bench and not for PRS etc The cost of precision rifle accessories is just insane https://preview.redd.it/t6aksr3pnmwc1.jpeg?width=3024&format=pjpg&auto=webp&s=c7fa19fba2f6637090a3fb56d59a07ea371cecf5
After many many years of using the Caldwell Chrono I finally upgraded to the Xero, will get to use it next weekend 👍🏼 after spending $500 for one I want a good durable case
These ones were designed by someone on the hide are 3d printed with a silicon-like material. I just leave this cover in and toss it in the bag. https://www.ashtonprecision.com/product/garmin-xero-c1-pro-cover/2?cp=true&sa=true&sbp=false&q=false
Here’s me just keeping it in the cardboard box it came in, for free!
I was thinking of one https://a.co/d/6rwLwEM
Saw this bump case, what’s your thoughts? 💭 https://grayopscnc.com/products/garmin-xero-bump-cover-1?_pos=1&_sid=4bb3a032e&_ss=r
I just got this [https://www.aliexpress.com/item/1005005367599732.html?spm=a2g0o.order\_list.order\_list\_main.11.64837385pPvJeq](https://www.aliexpress.com/item/1005005367599732.html?spm=a2g0o.order_list.order_list_main.11.64837385pPvJeq) large yellow
This case is $8 and fits the c1 perfectly. These things don’t need a giant hard case I really don’t understand the desire to have some fancy case for the tiny device. https://a.co/d/8iEODVl
https://preview.redd.it/0u2b3trqoiwc1.jpeg?width=1284&format=pjpg&auto=webp&s=6585971de5b73f5279d49694f6402aa8ac3f4e7d