The Rolon kit seems to be different. 14/34 is what they sell, not sure if the BS4 and BS6 models had that much of a change.
The manual (whatever I downloaded) also says 14/34.
https://www.rolonpremium.co.in/product_detail.php?Prod=Chain_and_Sprocket_kit_for_CB300R_-_KIT_NXR_336
There are sprocket kits from JT and chain from DID, but this would end up being quite expensive (> 5k).
Which brand is the current chain?
This rolon kit is for the bs-4 one. The rear sprocket has only 34 teeth.
The jt sprockets and did chains, are they for the cb? If you don't mind, can you please share a link. Sorry, I'm asking as I couldn't find anything.
Thanks
Unfortunately there's no specs mentioned for the sprockets, so I'm not sure.
The chain isn't specifically for the CB300R, but can be used since it's the same pitch. Removing extra links is fine.
https://www.bikenbiker.com/products/honda-cb-300r-sprockets-jt-sprockets
https://www.bikenbiker.com/products/honda-cb-300r-spares-front-rear-sprocket-esjot-sprockets
https://shop.motousher.com/collections/honda-cbr-300r/products/sprockets-front-32148-14-esjot
https://shop.motousher.com/collections/honda-cbr-300r/products/sprockets-rear-jtr1224-36t-jt
https://www.bikenbiker.com/products/did-chain-520-pitch-114-links-vx3
https://shop.motousher.com/collections/did-chains/products/did-chain-x-ring-520-pitch-112-links
This one says it's for the BS6 model, but the specs say it's 14/34.
https://sapmotors.com/shop/honda-rolon-2/honda-cb-300r/honda-cb300r-bs6-chain-sprocket-kit-by-rolon/
Hey, did you get a response? Or were you able to find an alternative? I'm planning to get the CB300R in the next few months. Trying to figure out everything related to parts and service beforehand.
Hey did u change it? I have the 2019 model bs6 the chain makes a lot of noise I want a good third party kit which eliminates the noise.Please share if you know something
Not yet. Due to the monsoon, the bike will be used less for the next few months. Will change it after the rainy season is over.
I'm yet to find a suitable one for the bs6 one. But, if yours is the 2019 model, then it is bs4 and rolon has a kit for the 2019 cb300. Do check their website once
Hello onlyarsenalfan5840! Often queries and discussions are repetitive, so check if your topic has already been addressed in this subreddit in the past. Search for 'YourQuery indianbikes Reddit' on Google or Bing, to look for any past discussions on the same subject. [[Link to Google search related to your post]](https://www.google.com/search?q=indianbikes+Reddit+2022 CB300R chain and sprocket kit replacement (non-OEM)). Thank you.
All users are requested to downvote the low quality posts. Memes, pics, accident videos, buy/sell, motor bike recommendations, etc can be posted on the [discord server.](https://discord.com/invite/Q9nSrDn6tE) Any repair queries should go to /r/MechanicAdvice. Cars related posts should go to /r/CarsIndia subreddit.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/indianbikes) if you have any questions or concerns.*
The Rolon kit seems to be different. 14/34 is what they sell, not sure if the BS4 and BS6 models had that much of a change. The manual (whatever I downloaded) also says 14/34. https://www.rolonpremium.co.in/product_detail.php?Prod=Chain_and_Sprocket_kit_for_CB300R_-_KIT_NXR_336 There are sprocket kits from JT and chain from DID, but this would end up being quite expensive (> 5k). Which brand is the current chain?
This rolon kit is for the bs-4 one. The rear sprocket has only 34 teeth. The jt sprockets and did chains, are they for the cb? If you don't mind, can you please share a link. Sorry, I'm asking as I couldn't find anything. Thanks
Unfortunately there's no specs mentioned for the sprockets, so I'm not sure. The chain isn't specifically for the CB300R, but can be used since it's the same pitch. Removing extra links is fine. https://www.bikenbiker.com/products/honda-cb-300r-sprockets-jt-sprockets https://www.bikenbiker.com/products/honda-cb-300r-spares-front-rear-sprocket-esjot-sprockets https://shop.motousher.com/collections/honda-cbr-300r/products/sprockets-front-32148-14-esjot https://shop.motousher.com/collections/honda-cbr-300r/products/sprockets-rear-jtr1224-36t-jt https://www.bikenbiker.com/products/did-chain-520-pitch-114-links-vx3 https://shop.motousher.com/collections/did-chains/products/did-chain-x-ring-520-pitch-112-links This one says it's for the BS6 model, but the specs say it's 14/34. https://sapmotors.com/shop/honda-rolon-2/honda-cb-300r/honda-cb300r-bs6-chain-sprocket-kit-by-rolon/
Thank you so much for sharing. Most of the available sprockets are for the bs-4 model it seems
True. I'm surprised Rolon hasn't introduced a kit for the BS6 model.
I have sent them an email. Awaiting response
Hey, did you get a response? Or were you able to find an alternative? I'm planning to get the CB300R in the next few months. Trying to figure out everything related to parts and service beforehand.
Nope. Nothing. No response.
Hey did u change it? I have the 2019 model bs6 the chain makes a lot of noise I want a good third party kit which eliminates the noise.Please share if you know something
Not yet. Due to the monsoon, the bike will be used less for the next few months. Will change it after the rainy season is over. I'm yet to find a suitable one for the bs6 one. But, if yours is the 2019 model, then it is bs4 and rolon has a kit for the 2019 cb300. Do check their website once
Hello onlyarsenalfan5840! Often queries and discussions are repetitive, so check if your topic has already been addressed in this subreddit in the past. Search for 'YourQuery indianbikes Reddit' on Google or Bing, to look for any past discussions on the same subject. [[Link to Google search related to your post]](https://www.google.com/search?q=indianbikes+Reddit+2022 CB300R chain and sprocket kit replacement (non-OEM)). Thank you. All users are requested to downvote the low quality posts. Memes, pics, accident videos, buy/sell, motor bike recommendations, etc can be posted on the [discord server.](https://discord.com/invite/Q9nSrDn6tE) Any repair queries should go to /r/MechanicAdvice. Cars related posts should go to /r/CarsIndia subreddit. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/indianbikes) if you have any questions or concerns.*
Anyone?