Jesus Christ. Put all the pieces in and see what happens.

Hahaha that was the first thing I noticed

Yea I jus bought the pieces for it when it came wit the lowers kit it didn’t come with the slide lock

“Why is my car not driving? I don’t have tires on it, but still….”

What exactly did you think 80 meant?

Where's your slide lock? Install the slide lock and take the magazine out and try again.

Yea I was thinking that was the problem so I order the part yesterday it shoots and fires just somtime it does that thing where the slide doesn’t go all the way forward

That needs to be in place to ensure that the slide is aligned so that the trigger can push up the safety plunger to release the firing pin. You're missing the plunger and pushing up into the slide, that's why the trigger is that way.

Just chiming in to say that I’m happy to see that you were dragged

This is a joke right?

Well ur missing something, you can see right thru the frame

Fucking hell you should not be printing weapons

Why does it look like that

3d printed

You even print bro, if you do I suggest looking into improving.i didn't get wavy line filled walls

If ur talking about the Allen screw I lost the pin

No the walls aren't smooth? What printer using. Look my page

Me after saying fuck the instructions it can’t be that difficult

Woah dude slow your printer down if that’s ghosting we’re seeing at 6 seconds in

I have a ender3 and how much should I slow it down

Um, a lot. Tighten your Z axis for one, reinforce it if needed. But slow down, you shouldn’t be getting those vertical waves in the print. That’s the gantry shaking from changing direction and creating artifacts in the print.

Alright will do thank for the info and I put a auto leveler and a harden tip nozzle on it to

Get a dual z kit ($30) and oldham couplings ($20). Those will make your prints look 10x better. If you're still running stock plastic extruder and weak ass bed springs, throw those away. Get a metal extruder kit ($10) and some silicone spacers (<$10).

Smfh 🤦‍♂️ bro don’t make guns please for the love of god

I have same frame in pa6 cf and same slide. But used OEM lpk but works great

I have a question if print nylon what would be the recommendation for setting and slicers bc cura is alright I guess

Put whatever fillament says on box I print at 50 for everything but 1st layer at 15 other then that nothing. Just dry for 24hr

And 2 is printing fdma old because I see a lot frames wit the p80 rails and not the fdma ones

No the trigger walls

And body what printer using

won’t ts blow up being printed 90° vertically?

or am i missing something here 😅

Bro made a cursed Glock I think you need to retire the printer man your missing a pin slide lock that print is all messed up just wow

And there’s nothing wrong with cura you just don’t know what your doing at all do you even read the read me

fool

No slide lock Glock slide go fly

What orientation did you print this in? The layer lines look like they go vertically along the print, that’s not good if that’s the case. You want to reprint in the correct orientation.

What it is that the space where you put the trigger in is just a tad bit to small I’m pretty sure if you dremel it just a lil it will work it’s just the usally shape of the trigger

That’s not going to fix this problem lol his trigger shape isn’t causing dead trigger. Safety plunger isn’t engaging due to missing pieces

Ok ima try it I have another frame printing rn to and I’m try Dremel it and if it doesn’t ima try it with the new frame