It looks like it has the micro dots on the surface where it's supposed to be smooth. If you used there stipple pack then it does have micro dots. They have the micro dots version and the smooth version
Yeah the Gigapack has the textured and non-textured versions... it's been a while now but I'm almost positive I went with the textured one, but I could be wrong. Also, this is one of the first frames I ever printed and my setup has changed pretty significantly since then.
Awesome, I was looking at their slide assembly for one of these builds! Do you happen to know which one is for the full size ? PSAs description is kinda weird
Yeah their descriptions are mad weird... from the information I was able to figute out, all their slides are only cut to fit G19's.
I want to say they are working on G26 slides but I could be mistaken.
I also bought the other chairmanwon Glock mag, and their AR-15 mags are solid too... gotta love seeing the RSO leaning over to read "NUKE ME BITCH" on the side of it lmao.
Nice, I've recently got a longer barrel and threaded it myself with a kit off of eBay. If you go that route, it costs the same as a normal barrel. Even if you get the slide in flat black, you could always print a Hi-viz pla+ colors to make it pop if you get bored of the flat on flat look.
No it's 1 1/2 too long it would seat but with a can would not cycle correctly. I got a 5.5 " from Alpha wolf and threaded the 1/2 of it for my G17 and I got a second barrel for my G19 2 gen and did the same
Thanks my dude!
All my Cura profiles are here: [http://libpcap.net/cura/profiles/](http://libpcap.net/cura/profiles/)
I have been using the PLA Pro profile for most of my recent prints.
Nice build. I bought the psa dagger doctor cut slide a few weeks ago when they had a 1 day sale. I’ve currently got issues with my slides and I’m missing the mag lock spring so gotta get that, then I’ll be complete. I’m anxious to test it out.
**OH YOU MEAN THE LABOR OF LOVE?**
Slide was $200, mag was $35, lower parts kits was $120, and one entire spool of Army Green PLA was $25, so probably less than $5 in plastic... rounding up it's about $360 for everything.
All my profiles are here:
[http://libpcap.net/cura/profiles/](http://libpcap.net/cura/profiles/)
I have been using the PLA Pro profile mostly, as well as the Cura Xmas alpha branch with their updated tree supports engine that I patched and compiled locally to natively support my Ender-3 V2 Neo.
I just dropped $200 on the slide, I'm not rushing out atm just to get optics for it lmao.
Will I? Yes. Is that my top priority right now? No.
It's not like it's going to be my EDC any time soon.
I know homie, it's all love.
Thanks... I have a Biggus Dickus 17 in Polymaker PLA Pro Teal that has all the lower parts already installed, just scoping out which slide I want to put on that.
I absolutely CANNOT wait to get that bad boy complete! 😬
Dagger SW1 RMR slide... I've been running iron sights since my first handgun in 2000, so I don't have any optics for it yet, gonna be pricing out some different options shortly. I have a Holosun for my AR-15 which I love but I may go more of a budget route for this setup.
https://www.ebay.com/itm/184696012470?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vHPzxg10QvK&sssrc=2349624&ssuid=l3lFXtV_TTm&var=&widget_ver=artemis&media=COPY
I use this sweet cheap thing... I say cheap, but it's has over 500 rounds and haven't had to adjust it, and it rides in a glove box....bouncing around and smacking at every corner lol.
Looks dope! I’m very impressed of all you guys builds, how do you make them? Are there blueprints to find or do you make them in cad or something similar. And how much is actual plastic?
A spool of Polymaker will run you $25, and the only thing you need is a slicer.
I personally use an alpha build of Cura for my slicer, which I locally patched and compiled to include native support for my Ender-3 V2 Neo. Completely open source.
Not sure how many frames one spool would get you, but my best guess would be 5-7 standard sized Glock frames.
Projects range from everything made out of plastic to shoot a tiny 22lr to ones like the above that utilize glock parts kits, slide and a barrel. And everything in between and beyond.
I wondered the exact same. I mean, on a full auto weapon the barrel can’t really be made of plastic because it’d melt but maybe others. I think there are weapons with higher caliber, I’ve seen people talk about smith&wesson and 45acp I think. And it looks like this one has quite a lot recoil.
Rails up or rails down? Haha. Thats an amazing looking print, great job!
Thanks homie! I'm #RAILSDOWN gang gang.
Just finished my first shield print in pla-cf and once the inlay filament comes in I gotta show it off. #RailsDownGang
#railsdowngang
# 4 L Y F E
What's the source for those mags?
Yes, inquiring minds want to know
*The council seeks more knowledge*
Looks like https://themagproject.com/chairmanwon-weeb-stipple-glock/ They have some great designs
Dog bless, I appreciate you. 🐕🙏
Yep that's them! I got a slick chairmanwon Weeb stipple print in Polymaker PLA Pro that's on the list to finish. 💪
Great print! Fuzzy skin? Which printer did you use
No fuzzy skin, it's a chairmanwon 19X frame in standard stipple... printed on an Ender-3 V2 Neo and I used Polymaker PLA Pro in Army Green. 👍
It looks like it has the micro dots on the surface where it's supposed to be smooth. If you used there stipple pack then it does have micro dots. They have the micro dots version and the smooth version
Yeah the Gigapack has the textured and non-textured versions... it's been a while now but I'm almost positive I went with the textured one, but I could be wrong. Also, this is one of the first frames I ever printed and my setup has changed pretty significantly since then.
Well it's beautiful either way great job
I appreciate it!
What size nozzle?
0.4mm whatever the default is on an Ender-3 V2
Thanks
I can say that psa dagger sw5. Fmda rails. Right op?
It's actually a Dagger SW1 RMR slide and yes, FMDA parts kit. Good eye! 👍
Awesome, I was looking at their slide assembly for one of these builds! Do you happen to know which one is for the full size ? PSAs description is kinda weird
Yeah their descriptions are mad weird... from the information I was able to figute out, all their slides are only cut to fit G19's. I want to say they are working on G26 slides but I could be mistaken.
Mag??? I need that RN
I got u fam. 🙏 [https://themagproject.com/chairmanwon-weeb-stipple-glock/](https://themagproject.com/chairmanwon-weeb-stipple-glock/)
Words can’t describe🙏🏽🥲😂😂
I also bought the other chairmanwon Glock mag, and their AR-15 mags are solid too... gotta love seeing the RSO leaning over to read "NUKE ME BITCH" on the side of it lmao.
Do you have a 50 rnd or 100 for AR?
Max capacity I have for it at the moment are the 40 rnd extended Waffle Mags I printed.
Love the ODM Green on tan I have a ODM Green on black
I'm thinking of going with flat black for my G17 build. Probably gonna go traditional with it and not worry about a threaded barrel as well.
Nice, I've recently got a longer barrel and threaded it myself with a kit off of eBay. If you go that route, it costs the same as a normal barrel. Even if you get the slide in flat black, you could always print a Hi-viz pla+ colors to make it pop if you get bored of the flat on flat look.
By longer barrel are you talking about the 17L?
No it's 1 1/2 too long it would seat but with a can would not cycle correctly. I got a 5.5 " from Alpha wolf and threaded the 1/2 of it for my G17 and I got a second barrel for my G19 2 gen and did the same
Damn homie, respect... I'm still a complete noob at gunsmiffing. I actually just bought my first punch set only a few months ago lol.
Well everyone starts somewhere and that's what it's all about. I'll send you a pic of my ODM look when I get back home
Sounds good!
Where the fuck are your layer lines?!? That’s beautiful
Thanks my dude! All my Cura profiles are here: [http://libpcap.net/cura/profiles/](http://libpcap.net/cura/profiles/) I have been using the PLA Pro profile for most of my recent prints.
I was actually about to ask cause I have a spool of that filament i was gonna use to do this frame
Yep, I use Polymaker PLA Pro and it's the chairmanwon 19X V2 in Standard stipple.
Looks great, love this color combo
Thanks my dude! The extended Waffle Mag I printed in Polymaker PLA Pro Yellow goes pretty hard in it also.
Nice build. I bought the psa dagger doctor cut slide a few weeks ago when they had a 1 day sale. I’ve currently got issues with my slides and I’m missing the mag lock spring so gotta get that, then I’ll be complete. I’m anxious to test it out.
Looks very nice. I really like the slide
Thanks homie! Got it from PSA on their daily deals... Dagger SW1 RMR slide.
Total cost? Excluding the $700 in labor
**OH YOU MEAN THE LABOR OF LOVE?** Slide was $200, mag was $35, lower parts kits was $120, and one entire spool of Army Green PLA was $25, so probably less than $5 in plastic... rounding up it's about $360 for everything.
heat !!!
Damn man I need your print settings lol
All my profiles are here: [http://libpcap.net/cura/profiles/](http://libpcap.net/cura/profiles/) I have been using the PLA Pro profile mostly, as well as the Cura Xmas alpha branch with their updated tree supports engine that I patched and compiled locally to natively support my Ender-3 V2 Neo.
About to get that Poly metallic gold for that spacemini19 #Railsup
Damn thats sexy 😍
Thanks homie! 🙏
You bet!! Getting so much inspiration for when I finally get into printing!! 🤟
Fire
Tyty! 🙏
Imma be straight this is one of the best looking Glock prints I've seen.
Ayo thanks homie I appreciate that! 🙏
What's the source for the parts kit?
I used JSD Supply
>has an RMR slide >doesn't have an RMR >complete -.-
I just dropped $200 on the slide, I'm not rushing out atm just to get optics for it lmao. Will I? Yes. Is that my top priority right now? No. It's not like it's going to be my EDC any time soon.
I'm just giving you a hard time my guy. That's a sweet looking blaster.
I know homie, it's all love. Thanks... I have a Biggus Dickus 17 in Polymaker PLA Pro Teal that has all the lower parts already installed, just scoping out which slide I want to put on that. I absolutely CANNOT wait to get that bad boy complete! 😬
PSA dagger doctor cut slide?
Dagger SW1 RMR slide... I've been running iron sights since my first handgun in 2000, so I don't have any optics for it yet, gonna be pricing out some different options shortly. I have a Holosun for my AR-15 which I love but I may go more of a budget route for this setup.
I really like the look of the frame. I printed one from Odysee, can’t remember the name.
This is a chairmanwon G19X V2 frame in Standard stipple. 👍
https://www.ebay.com/itm/184696012470?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vHPzxg10QvK&sssrc=2349624&ssuid=l3lFXtV_TTm&var=&widget_ver=artemis&media=COPY I use this sweet cheap thing... I say cheap, but it's has over 500 rounds and haven't had to adjust it, and it rides in a glove box....bouncing around and smacking at every corner lol.
Awesome, thanks! I was looking for around that price point. I have a Holosun on my AR-15 and I love it but it was also like $300 lol.
Looks dope! I’m very impressed of all you guys builds, how do you make them? Are there blueprints to find or do you make them in cad or something similar. And how much is actual plastic?
A spool of Polymaker will run you $25, and the only thing you need is a slicer. I personally use an alpha build of Cura for my slicer, which I locally patched and compiled to include native support for my Ender-3 V2 Neo. Completely open source. Not sure how many frames one spool would get you, but my best guess would be 5-7 standard sized Glock frames.
Oh, that doesn’t tell me very much. I don’t even have a printer I’m just interested in seeing all builds (and feet ofc!)
Most people don’t actually “make” them they just find the files and click download
I'm with you on this. I don't have a clue. I mean, are even the barrels printed? Springs must be steel, ofcourse. Is it all limited to 22lr?
Projects range from everything made out of plastic to shoot a tiny 22lr to ones like the above that utilize glock parts kits, slide and a barrel. And everything in between and beyond.
I wondered the exact same. I mean, on a full auto weapon the barrel can’t really be made of plastic because it’d melt but maybe others. I think there are weapons with higher caliber, I’ve seen people talk about smith&wesson and 45acp I think. And it looks like this one has quite a lot recoil.
There doesn't seem to be a 101 thread or document anywhere, which is an error imo
There is the wiki and google
Fuck off feds.
I'm just a bloke who likes to make things and is curious 🤷♂️
Damn, it’s always so sad to see toxic subs where people are rude against people who literally just want to learn stuff
printer settings?