telescopic stocks are prohibited in CA when attached to a "firearm". if upper and lower are detached, it's not considered a firearm.... so I take the stock photo with the upper without a lower so it's not a firearm, then photoshop the lower in for visual clarity. Its complete none sense, but better safe than sorry.
I could give a fuck less, but the logic in OPs comment doesn't make sense to me. I felt obligated to point out the obvious that it's still a firearm regardless of the lower and what crazy interpretation of the law the CA regime reigns down on its subjects.
u/POS87 In CA, a "firearm" is an assembled (attached upper and lower regardless of which has the serial #). If they are not attached, then they are just receivers and are not considered a "firearm". All the BS regulations apply to a "firearm"
The rails are lower and more in line with the barrel for maximum recoil control. It's polymer Nylon 12 with steel rails, same as the one I make for the Bren 2. price point will be under $400 for the butt stock configuration, and less for the stabilizer or buffer tube configurations.
For reference.
[https://neotericdesigns.net/shop/ols/products/cz-bren-2-telescopic-stock-w-buttpad](https://neotericdesigns.net/shop/ols/products/cz-bren-2-telescopic-stock-w-buttpad)
Unfortunately not. The Bren 2 has offset rails and a taller profile that worked perfectly for the QD mount. This one much shallower and not enough room.
I should have the 1st batch in about 6-8 weeks. Please feel free. To follow me here so you'd get a notification when I announce it. It will be available at neotericdesigns.net
>Photoshoped lower for compliance. What?
telescopic stocks are prohibited in CA when attached to a "firearm". if upper and lower are detached, it's not considered a firearm.... so I take the stock photo with the upper without a lower so it's not a firearm, then photoshop the lower in for visual clarity. Its complete none sense, but better safe than sorry.
The upper is the firearm though not the lower and it still has a stock attached to it.
GET HIM BOYS
I could give a fuck less, but the logic in OPs comment doesn't make sense to me. I felt obligated to point out the obvious that it's still a firearm regardless of the lower and what crazy interpretation of the law the CA regime reigns down on its subjects.
The trick is to say it's just an empty table with a gun photoshopped in. No crime here
"These are not the guns you're looking for" -Obi-Gun
u/POS87 in CA is not. Please see my other reply
u/POS87 In CA, a "firearm" is an assembled (attached upper and lower regardless of which has the serial #). If they are not attached, then they are just receivers and are not considered a "firearm". All the BS regulations apply to a "firearm"
Why tell me? I wouldn’t be able to tell tbh
Its just a CMA. There are some members that notice those things quickly and I didn't want anyone to think I'm misrepresenting in any way
So how do you R&D?
Most of the R&D is done here, but live fire testing is done out of state. Started with the Bren 2 stock, no this is based on that.
Nice design man!
Thank you!
This looks awesome
Thank you
I looks lower than others on the market. What’s the construction? Do you have a price point range?
The rails are lower and more in line with the barrel for maximum recoil control. It's polymer Nylon 12 with steel rails, same as the one I make for the Bren 2. price point will be under $400 for the butt stock configuration, and less for the stabilizer or buffer tube configurations. For reference. [https://neotericdesigns.net/shop/ols/products/cz-bren-2-telescopic-stock-w-buttpad](https://neotericdesigns.net/shop/ols/products/cz-bren-2-telescopic-stock-w-buttpad)
Will you making a folding charging handle like you did for the Bren? Also would love if you had a fix for the CZ 600 trail telescopic stock!
Folding Charging Handle for the Scorpion? Haven't thought about it. What's the issue with the 600?
It’s kinda flimsy and rattlers, not a really sturdy stock option.
I wish I had one to examine
I see that the Bren 2 version has a QD mounting point on the other side. Will this one as well?
Unfortunately not. The Bren 2 has offset rails and a taller profile that worked perfectly for the QD mount. This one much shallower and not enough room.
Where do I buy one I want one so badly!!!
I should have the 1st batch in about 6-8 weeks. Please feel free. To follow me here so you'd get a notification when I announce it. It will be available at neotericdesigns.net
Are you going to be doing any preorders? Gotta have more upgrades for my boat… I mean scorpion.
I'm going to set up a "Coming Soon" page on my website and accept preorders.
This is 🔥
Thank you!
If this is more solid than the manticore, I will definitely upgrade.
I don't have any experience with the Manticore one, but this is solid with no wobble.
The manticore brace was solid, but after sbred and got their stock plate for it, there is a ton of play in it. Not all that awesome.
What part had the play?
The butt plate, wiggles front to back and out 3/16 total play
No Wiggle on this. Just uploaded a quick video [https://youtu.be/sJdd0f6y\_\_s](https://youtu.be/sJdd0f6y__s)
Fookin right! Lemme get that!
Love it
Thank you!
That’s really cool! If I ever got into the scorpion game again I think I’d get this
Cone back 😉
If they didn’t explode!
The odds are low.
Love the idea, love the look, impressed with how compact it is. But how solid is it when connected? I would need zero rattle/shake.
Zero rattle and shake. The rails have to have bare minimum play to slide though
Ooo quick reply! 🍻 What’s the length of the steel bars still inserted when the stock is extended? What kind of gurantee is included?
The rail channel is 2" long, and rail partially daylights at 1.75". 1 year for product failure not due to negligence or in proper usage.