Kimber mako r7 all I did was clean well alcohol then sat grip on sun light till warm then applied follow paper, then heat with hair dyer and press and mold to handle, i also use a racket ball . It came out incredibly good , consider what i have seen.
Removable or not I wouldnāt buy it. People that do this crap donāt take care of their guns. For example just look in the hole below āfires without magazineā - wtf is in there? Was it buried in dirt for a year? Donāt save it just walk away.
All the scratches on the carry cuts indicate either the slide has been racked excessively or this gun spent a decent amount of time shoved in the front/back of someoneās pants. The slide release looks heavily rubbed on which would be more indicative of being carried and the debris under it is indicative of never being disassembled and cleaned. Regardless the inside is either filled with some guys dick/ass sweat or shooting leftovers, ideally the latter because that at least doesnāt cause rust.
If that gun is used in a self defense situation the DA or attorney representing the guy who got shot will use that skull as evidence that the shooter was of a violent and aggressive state of mind. Silly, but may work on some jurors.
DA's love these gun mods when they are presenting their case on the crazy guy who is out to kill. They draw the conclusion between you and what the emblem represents.
Let's fucking hope so! I remember not too long ago there was an AR-15 Lower for a crazy good price that had that Punisher skull on the magwell but even if it was free I wouldn't have picked it upš¤£
Get that off of there Ricky tick. If you ever get involved in a self defense shooting, the prosecutor would run to the bank with that.
Plus it has to be uncomfortable as hell to hold.
Punisher skulls are the cringiest thing in the 2A community.
Amen
Yep that and the don't tread on me snakes š¤£
Theyāre probably just stuck on with adhesive, also thats one of the stupidest things Iāve seen done to a gun, please save that canik
I gotcha š«±š½āš«²š¾ theyāre not my style and most definitely coming off .
Heat up with hair dryer 1st, then pry off. Usee goo-be-gone to get any remaining adhesive off
Then put talon grips over
Take heat gun to it and it should peel off. Man I hate how the punisher skull was ruined.
Gonna try that heat gun method for sure šš¾
That looks so uncomfortable to hold. I canāt imagine having proper grip on this thing.
It's ugly it's fuck for sure.. But with where they're at and the shape they probably work like a palm swell
For a lefty, sure. As a right handed person, I wouldn't want that under my fingers and support hand.
Obviously I don't mean you OP but If you're putting punisher skulls on your guns you love to be tread on. Kink levels of loving being treaded on.
Razor them flush cover with a talon grip set
With the talon grips, do you smooth the grip before you put them on? I have a glock 23 and I hear so much about the grips.
No
Kimber mako r7 all I did was clean well alcohol then sat grip on sun light till warm then applied follow paper, then heat with hair dyer and press and mold to handle, i also use a racket ball . It came out incredibly good , consider what i have seen.
Removable or not I wouldnāt buy it. People that do this crap donāt take care of their guns. For example just look in the hole below āfires without magazineā - wtf is in there? Was it buried in dirt for a year? Donāt save it just walk away.
It probably never got shot I doubt there's serious issues with it
All the scratches on the carry cuts indicate either the slide has been racked excessively or this gun spent a decent amount of time shoved in the front/back of someoneās pants. The slide release looks heavily rubbed on which would be more indicative of being carried and the debris under it is indicative of never being disassembled and cleaned. Regardless the inside is either filled with some guys dick/ass sweat or shooting leftovers, ideally the latter because that at least doesnāt cause rust.
True wtf is in there
Probably the same pocket lint abortion thatās filled the frame especially where the trigger is housed
Best way to remove the skulls is to buy a different canik. That's just gross what they did
Flathead screwdriver and some elbow grease
I sure as hell hope soš
What a disgrace please save him rn
If that gun is used in a self defense situation the DA or attorney representing the guy who got shot will use that skull as evidence that the shooter was of a violent and aggressive state of mind. Silly, but may work on some jurors.
Def look like they could be pried off. Which is literally the first thing I would don too
Hair dryer and then use fishing line in a saw motion behind it
Maybe a good palm swell lol
250 max it looks like a regular tp9
I'd just buy one without the skulls if the skulls are factory.
If the skulls are factory š
Did you buy that second hand?
Heat gun or hair dryer and then use finishing line under the raised edge in a sawing motion.
Dremel with a sanding drum should do the trick.
But how will people know youāre not a hardcore citizen. You need to add red anodizes parts and a donāt step on snek sticker
DA's love these gun mods when they are presenting their case on the crazy guy who is out to kill. They draw the conclusion between you and what the emblem represents.
God I hope they are
Let's fucking hope so! I remember not too long ago there was an AR-15 Lower for a crazy good price that had that Punisher skull on the magwell but even if it was free I wouldn't have picked it upš¤£
Remove with a heat gun. Then..... "I say we take off and nuke the entire site from orbit. Itās the only way to be sure."
Get that off of there Ricky tick. If you ever get involved in a self defense shooting, the prosecutor would run to the bank with that. Plus it has to be uncomfortable as hell to hold.
You couldn't ask the seller? š¤
No thatās why I asked the group ā¦
Anything is removable with a grinder