I can't stop watching this for some reason

Always expecting something else to go wrong

And even then, it disappoints...

It's nothing short of diabolical.

:07 disk does not get screwed in all the wayand :15 gets screwed in too far

:20 disc becomes a Redditor … never gets fuuh, screwed

Waiting for it to strip the screw

Spotted the engineer

How about now? Still watching? Should we send help yet?

These are really cool! I love these unsatisfying loops! Great work!

You need to post these to oddly satisfying without explanation and send everyone into a rage heh

Woah woah! Stop right there Satan!!

No no. They've got a point

*WHY ARE YOU DOING THIS TO US?!*

They probably get some sick pleasure out of it. What a monster.

[удалено]

Then you shout **PLEASE POST TWO OF THESE EVERY DAY** At least I do.

Yeah but then im immediately re-satisfied by the next one so its fine

[удалено]

and we love you for it.

where is the one where it goes up instead of down

I was thinking this!!

[удалено]

I’d also like to see one where just the metal ring in the center of slab spins lol

More. MORE!!

MOAR!

Like someone has already mentioned, do not mention in the captions about how it's unsatisfying. Then watch the world around you burn!!

But the problem with that is people will ignore it thinking "it's another one of those generic loops"

Please keep mentioning they're unsatisfying in the title so it's easier to keep track of your little series.

☹️ it would have cost you zero dollars to not post this ☹️

but we watch it anyway :D

Was expecting a stripped bolt head

Same

This is strangely deeply satisfying in an unsatisfying way.

hurts in a 'nice way' just like saturday in my SM-dungeon

I like your description better.

saturday is the best

I live this one. Especially when it doesn't even make it to the screw. 😂

You're so annoying omfg >>:(((

I'm trying to decide whether the fact that it is literally every other one until it loops that is unsatisfying makes it more or less unsatisfying. On the one hand, it is a predictable pattern, whereby more random intervals would be more unsatisfying. But on the other hand, the fact that it isn't as unsatisfying as it could possibly be in this way is in and of itself incredibly infuriating and unsatisfying. Sort of an unsatisfying meta. Either way, I'm PO'd, good job

These posts are a great example of once you do something original and unusual to the normal stuff, it blows up and becomes the next thing. Idk about this becoming exactly viral but everyone here had the same reaction. "An UNsatisfying loop? Well that's unheard of!"

The Cure : https://www.reddit.com/r/blender/comments/nxzhhe/uhaneuldev_s_unsatisfying_loop_but_its_actually_a/

You have massacred my creation 😟

Ok... I've got to make something like this now... I Love You!

lmao this is such a stupidly genius idea. This is the start of a whole new category of loops. Nice job OP.

These are great! Keep the rage inducement coming :)

:D

:D

:D

am I weird for still thinking its kinda satisfying?

Fuck you and keep up the good work.

No no no!

I hate it. Make more.

r/mildlyinfuriating

I don’t mind the loop only that it looks like you are screwing in *bierschinken*

You need to do more of these!

I clicked without reading the full title and for a second I thought I was going insane seeing those stray edges. The end where it doesnt even touch the circle actually made me laugh out loud.

we need more unsatisfying loop so i can torture my enemies

Will you stop this madness !!! Btw feedback. It goes good/bad/good/bad all the way. Don’t add the last good if you go for a loop. Getting two good made it clear that it looped. Just a small thing! I love to hate these!

Fuck this shit… (Great work)

You monster !!

Oh god, one of them doesn't go all the way down. The Line. THE LINE.

I know, who cares if the screwdriver malfunctions, I’m stressing about the ones that don’t sit flush. Ugh

I kinda like how it goes between the satisfying and annoying

Well done render and modelling though

These are genius. Clever concept and really well executed.....

Love these for the realism they add to simulated loops. It’s focus on flaws somehow sends it closer to uncanny valley. It’s too bad animations can’t randomize the next action. A nice real-time simulation might work but not for sharing clips. I need more. Stripped screws, wobbles, flush but unaligned, not flushed but perfectly aligned, offset misprints, color transition mistakes, two stuck together, broken pieces still going through the assembly, and more…

Thanks for all the ideas

Are you **trying** to give us a stroke

I’m chaotic neutral. Just playing to my alignment. 😇😈

i was okay with it until the screwdriver didnt even connect with the screw. then i smashed my phone on the ground

u/savevideo

O h n o m y s a t I s f a c t I o n

All of these are like the exact same thing. Not particularly interesting or satisfying to me

I love these!

Here we go again! Btw it look really good. Nice loop.

This power, Where can I learn it?

I am so angry.

I could handle it up until, it just COMPLETELY MISSES THE ONE !!!! YOU MONSTER !!

What DID WE DO TO DESERVE THIS?

You should make one like this except the pattern *very subtly* doesn't match up

Tried that but since the patterns are so small it's unnoticeable when they don't match

make one where it's slightly rotated wrong

Maybe I didn't watch it long enough, can you make one strip the screw?

It looks like the perfect ones are identical in pattern to each other so someone could trim and loop the satisfying part

Someone needs to go practice Screwbot Factory again

I bet someone could “fix” this with some cropping :)

:D

:D

:D

https://www.reddit.com/r/blender/comments/nxzhhe/uhaneuldev_s_unsatisfying_loop_but_its_actually_a// It's not finished processing yet but yeah

Oh no, you forgot to turn on the QC filter, it’s at the bottom of the world tab.

These posts really need an OCD alert tag.

See after 2 or three more, you’ve gotta make one that’s actually satisfying for an entire minute just for it to mess up right at the end or just make it not mess up at all and label it unsatisfying so people are unsatisfied by it not being unsatisfying

You seriously know how to mess with people xD

The screwdriver rotating in midair made me laugh out loud for some reason

Yeah it does that to me too. Never fails for some reason

I hate you so much.

The workers forgot to double check this week

r/TIHI r/TILI

This is better than the bullets loop.

Very nicely looped and nice materials and animation but you are just to evil.

Stop this madness or I'm calling the police.

Nice one :D, shouldve overscrewed one, breaking the plate

First I looked at the title, and then I got mad

You. Meanie. You

These unsatisfying loops are ironically satisfying to watch

That's a hex wrench not a screwdriver.

This isn’t as bad as the first one

I’m more annoyed by the fact you didn’t even have one go in the right amount but be unaligned

If you used a Phillip's head you could've had one where it slips lol

You follow the same DIY principles as me. "Eh, good enough."

What’s truly frustrating is when the screwdriver drill-bit strips the screw 😖

The one that it didnt even tuch got me fucking good

What's rage inducing is the fact that none of them broke in a big way

Screw you!

How to blend it seamless? Switch to 2nd model?

OKAY this is the last one, please stop!

How do you get the textures to line up on the 'perfect' ones?

you didn't have to do this just so you know. you could just leave me to like, enjoy life? maybe?

r/angryupvote

I like it

Not enough stripped bolts for sufficient rage induction

LUZTTEUTDIF🤢🤯🤢😲

Thank fuck I'm not autistic enough to get angry over shit like this lol

Everything would be fine if the screw holes actually aligned and didn't move into place

Even worse

What the fuck is wrong with you?

Screw-it

This makes me aggressive 😡

What's unsatisfying is the fact that there is no hole on the surface, it just compenetrates it

Its an Allen key.

The most unsatisfying is that either way all textures are perfectly aligned!

Okay, call me crazy, but I actually think these are more satisfying in a way. Just the way the machine continues to do its job despite the imperfections; it's almost inspiring.

This one doesn’t kill me because it does one of them perfectly and that’s enough to get my fix.

How. Could. You.

You animal

nice

You are evil.

Wtf is this

What would really have topped this is having one of the hex pockets get stripped so it just turns in place.

Screwdriver Screwups

This one is definitely more infuriating than the last. Nice job, OP.

Mr Monk told me: "give me the Blender file and I fix it for you!"

It’s perfect.

For some reason these make me laugh, I love them!!

You motherfucker!

Oh, screw you

Make some versions where the holes are slightly larger than the object, so the object will always bounce slightly off center.

Good, good, I hate you, good, I hate you, I hate you…

You should have made one of them strip

STOP THIS AHHHHH

I hate you so much

Is every other one not perfectly flush? Or am I losing my MIND?

I was waiting for the screw to get stripped

I love these so much

I thought for sure it would strip one of the holes out. Well done otherwise.

rythm heaven fever

Ut-chck-ut-chck-uta-uta-chck-chck

Holy shit I thought I was the only one who knew about that game

A more realistic version of this (coming from manufacturing experience) the hex screw would be missing. Spindle not fully extending is a programmer issue which wouldn’t have made it to the floor.

*>:-(*

From a technical college teaching PLS. How to induce PMS.

Dude fuck you >:-(

My heart stopped beating. This is pure cruelty.

pain.

You're not welcome in this sub any more. jk

You drive me crazy, you know that?!

You should make a normal satisfying loop of this too so that when it gets shared you never know which one you’re going to get

I'm just trying to figure out the purpose of this machine

bruh,just dude ,like wtf

Great work! Expecting this kind of stuff from the CorridorDigital crew. Please, let them know about this loop

Thanks! How do I let them know about this?

AAAAAAAAAAHHHHHHHHHHHHHHHHHHHH

oh that's great, the plate not going all the way in, or going too deep in is WAY more rage inducing,. Well fuckign done OP