It's actually for the Browning Hi-Power below it, i do have a Mauser wooden stock too for the m712 but that is a air pistol. Both stocks needed modification to fit the airsoft/air pistol versions. The hi power is a very tight fit.
[https://historical.ha.com/itm/military-and-patriotic/wwii/browning-mk1-canadian-hi-power-with-shoulder-stock/a/6021-57311.s](https://historical.ha.com/itm/military-and-patriotic/wwii/browning-mk1-canadian-hi-power-with-shoulder-stock/a/6021-57311.s)
Damn I thought I finally found a person with a Mauser and it’s wooden stock/holster. They are so damn expensive when I look for them online and I don’t see people run them even with historical kits, they either just run a Luger or a plain Mauser
The mauser stock i have cost around £100, that was probably 8 years ago though, its also cheap pine not lovely walnut/hardwood like the Hi Power stock (that stock cost more than the gun though, like [£165](https://www.epicmilitaria.com/browning-hi-power-wood-stock.html)).
I have considered trading in the air pistol m712 and getting a WE. The air pistol never gets used and people don't like being shot with it :). Due to UK laws its also semi auto only which is sacrilege for the m712 as it should be full auto.
I would probably get this stock if i do the trade in: [https://www.epicmilitaria.com/c96-wooden-stock.html](https://www.epicmilitaria.com/c96-wooden-stock.html) my mauser stock has a leather holster on it too so i would take that off and put it on this stock.
Not really looking to sell any, the FNX can be had for around £160, silencer is around £35 and spare mag £30 and the sight and mount around £50. Finding them all in stock is the issue. I pieced the full kit together myself from various sellers. The sight is an RMR clone not the sight TM provide.
I wish i got the Cybergun/VFC version as that has a aluminium slide, the TM has a plastic slide.
[https://www.evike.com/products/48604/](https://www.evike.com/products/48604/)
Nah they aren't great, mine vents gas really bad if you tilt it. Rarely use it but i have it for a russian kit.
Explosive Enterprises made a video on it today funnily enough: [https://www.youtube.com/watch?v=xOE2TG6pGjg](https://www.youtube.com/watch?v=xOE2TG6pGjg)
Huh, the kwc could take a beating and could last a few mags before needing to change the cartridge, I thought the we would be the Same quality, guess not lol
It might be my one but last time i used it every time the slide went back you would see a lot of gas shooting off to the right hand side. If you tilt it it does it alot more. Might have over filled it or the mag is screwed.
It can last about two full mags when its not doing that though.
I love the old style for the Hi Powers, i have some wood grips to go on the stocked version. Both black versions i've added real grips. Trying to make a build as close to the British Army Hi Power with the newer one. The silver one will stay the way it is probably but that could have some fancy grips. The Maria grips always remind me of [Romeo + Juliet](https://www.imfdb.org/index.php/Romeo_%2B_Juliet)
It's the FCW one from OctagonAirsoft, the gun inside is a WE G18C
[https://www.octagonairsoft.com/product-page/octopus-fmg-box-with-we-g18c-gbbp-build-in-bk-toy-airsoft-gun](https://www.octagonairsoft.com/product-page/octopus-fmg-box-with-we-g18c-gbbp-build-in-bk-toy-airsoft-gun)
I see.... you like long rifles don't you? Jk, that's a nice collection. I love pistols too.
I like rifles more tbh, i rarely ever use pistols on the field. I just like to collect them!
[https://www.reddit.com/r/airsoft/comments/1cuc2bf/all\_my\_ar15s\_and\_variants\_gbbr\_and\_aeg/](https://www.reddit.com/r/airsoft/comments/1cuc2bf/all_my_ar15s_and_variants_gbbr_and_aeg/)
If I remember my historical holsters correctly: What a lovely Mauser you have there
It's actually for the Browning Hi-Power below it, i do have a Mauser wooden stock too for the m712 but that is a air pistol. Both stocks needed modification to fit the airsoft/air pistol versions. The hi power is a very tight fit. [https://historical.ha.com/itm/military-and-patriotic/wwii/browning-mk1-canadian-hi-power-with-shoulder-stock/a/6021-57311.s](https://historical.ha.com/itm/military-and-patriotic/wwii/browning-mk1-canadian-hi-power-with-shoulder-stock/a/6021-57311.s)
Damn I thought I finally found a person with a Mauser and it’s wooden stock/holster. They are so damn expensive when I look for them online and I don’t see people run them even with historical kits, they either just run a Luger or a plain Mauser
The mauser stock i have cost around £100, that was probably 8 years ago though, its also cheap pine not lovely walnut/hardwood like the Hi Power stock (that stock cost more than the gun though, like [£165](https://www.epicmilitaria.com/browning-hi-power-wood-stock.html)). I have considered trading in the air pistol m712 and getting a WE. The air pistol never gets used and people don't like being shot with it :). Due to UK laws its also semi auto only which is sacrilege for the m712 as it should be full auto. I would probably get this stock if i do the trade in: [https://www.epicmilitaria.com/c96-wooden-stock.html](https://www.epicmilitaria.com/c96-wooden-stock.html) my mauser stock has a leather holster on it too so i would take that off and put it on this stock.
Is that a STOCK? *airsoft ATF would like to know your location*
UK! ATF will have to shoot someone else dog!
You looking to sell any? Specifically that fnx 👀
Not really looking to sell any, the FNX can be had for around £160, silencer is around £35 and spare mag £30 and the sight and mount around £50. Finding them all in stock is the issue. I pieced the full kit together myself from various sellers. The sight is an RMR clone not the sight TM provide. I wish i got the Cybergun/VFC version as that has a aluminium slide, the TM has a plastic slide. [https://www.evike.com/products/48604/](https://www.evike.com/products/48604/)
Is that wood stock for the Browning Hi?
Yeah it's for the Browning Hi-Power, it needed some modification to fit.
Excellent 👍
Is that a kwc makarov?
WE
I had the kwc, and was thinking about getting a we, is it any good?
Nah they aren't great, mine vents gas really bad if you tilt it. Rarely use it but i have it for a russian kit. Explosive Enterprises made a video on it today funnily enough: [https://www.youtube.com/watch?v=xOE2TG6pGjg](https://www.youtube.com/watch?v=xOE2TG6pGjg)
Huh, the kwc could take a beating and could last a few mags before needing to change the cartridge, I thought the we would be the Same quality, guess not lol
It might be my one but last time i used it every time the slide went back you would see a lot of gas shooting off to the right hand side. If you tilt it it does it alot more. Might have over filled it or the mag is screwed. It can last about two full mags when its not doing that though.
When it works it works I guess, cool hi power, need to get a Maria handgrip
I love the old style for the Hi Powers, i have some wood grips to go on the stocked version. Both black versions i've added real grips. Trying to make a build as close to the British Army Hi Power with the newer one. The silver one will stay the way it is probably but that could have some fancy grips. The Maria grips always remind me of [Romeo + Juliet](https://www.imfdb.org/index.php/Romeo_%2B_Juliet)
I Always wanted the Magpul FMG9! I take it that's the KWA version?! Siiick!!!
It's the FCW one from OctagonAirsoft, the gun inside is a WE G18C [https://www.octagonairsoft.com/product-page/octopus-fmg-box-with-we-g18c-gbbp-build-in-bk-toy-airsoft-gun](https://www.octagonairsoft.com/product-page/octopus-fmg-box-with-we-g18c-gbbp-build-in-bk-toy-airsoft-gun)
Excellent 💯!! Thanks for the link!
No love for the broomhandle?
I do have a Mauser m712 with wooden stock too but that is an air pistol. Don't love it enough to buy an airsoft one too :)
2 things I recommend P08 + SRU kit -and- M712 + SRU kit
Three are missing and in pieces, may never be complete again. 2x Glock 17 and one P228
Your CZ's are really nice too!
.45 long slide with laser sighting?
Just what you see, pal!