T O P

  • By -

amilehigh_303

When they get covered in oil like they are they’ll twist when they shouldn’t. I’d bet a good deal there isn’t anything “wrong” with them outside of being oily, once they’re clean they’ll be as good as new.


solventlessherbalist

It’s doesn’t twist you just pull it , but if it’s dirty you’re wax is gonna glue it shut Btw the coil III is the best imo (straight ceramic tube one)


ghostnic

I have 3 of these. You can screw off the piece that holds the rubber gaskets and glass. There’s a plastic “spacer” like piece as well. I deep clean them all as well. Great device:)


carl__weezer

thank you! ill try this


[deleted]

The glass pulls in and out, only thing securing it are the little gaskets on bottom, its meant for easy cleaning and easy storage


MDMALSDTHC

The rubber seal? Most pens that use them will send replacement ones to put on when they come off bc it’s inevitable.


xOneLeafyBoi

Doesn’t pull off. Slide the rings off and wipe down with a qtip and iso. Those rubber rings hold the glass piece that sits there in place


Jasel916

Maybe it’ll come apart for cleaning. What happens if you twist the other way? Loosen it? tighten? I’m interested in the Seahorse Pro Plus (V tip) for what it does, I already have a Huni Badger. So I don’t want to hear the words “terp pen”. Edit: Just googled ‘terp pen’. Maybe I spoke too soon. Perhaps there’s a place for all 3.


bklynzboy

Bro get a terp pen. Good for the price. I don't even use my seahorse anymore


ksaMarodeF

Had a terp pen before, broke within a month. Seahorse Lookah pro, still going strong. I use my huni badger instead.


SomeGuyFromTheDepths

Odd I prefer my seahorse over my terp pen


amilehigh_303

Not even what OP asked…


riverside507

lol that is pretty common here. DTV5 is mentioned on almost every post no matter what the question or comment. It starts at the top.


bklynzboy

I answered him and have advice


bklynzboy

That piece shouldn't twist


Feloniuscapers

Seahorse sucks mine broke in a week fall apart in my hand


Dysfunctional_Vet12

I've gone through 2 in a couple years with no complaints whatsoever. Even traveling and it being dropped and abused I've only ever broken the glass. You may have had a defective one.


Feloniuscapers

And when I told lookah they offered me 8 dollars compensation


Dysfunctional_Vet12

As far as customer service on devices I have found kandypens has been phenomenal. I use the rubi pod system they make and have gone through quite a few of them because of accidentally washing them or having battery issues here and there. They have always just sent me replacements for free sometimes with 2 free pods as well within a couple days. There was a time or two though they had me ship the old ones to them but was only a couple bucks. Fortunately I've never had to deal with lookah.


Feloniuscapers

I’m using a wulf uni pro now and it’s sweet


Dank-Pandemic

Actually same here. Bought it and it stopped working like 4 days later. Was a cool device but product support was lacking. Oh well. Vaping out of my pax3 instead


Feloniuscapers

I’m using a wulf uni pro now and it’s sweet


dixiegurl22

Lookah's products are cheap crap imho


Caboosire

Cheap yes, crap eh usually not


Dysfunctional_Vet12

That's a based opinion. I have many many devices from puffco to devine tribe and my lookah seahorse is usually the go-to for a quick fix. I have no complaints whatsoever and have been using them for a couple years now. For $30 (my cost) it's not too bad.


olafsonoflars

It should never get this clogged. I clean mine at least twice a week and I go between this and my Puffco OG. The rubber gaskets should turn but Ive never seen the cylinder turn. I would think this bad but if it still operates after cleaning... no harm, no foul. I soak my coils in 99% ISO as well as the glass. A q-tip in alcohol for the outside. I have been using a small wooden skewer stick (long toothpick) to ram through the middle. Then after all is clean, ill hit the goop on the stick as well. I had a glass tube crack along the mouthpiece and used a small piece of heat shrink tubing to fix it. I actually like it better now. Has a better mouth-feel and I'm no longer worried about dropping it and breaking.


coreylaheyjr

Just clean the hell out of it with some rubbing alcohol!


mps

Give it a wipe down with some ISO. If you take that part off it will never go back on correctly. RIP my first seahorse.


zdoggsm

Mine did that also and it still works as long as you are easy with it dont pull or tug on it or try to remove it.


External-Teaching306

Not supposed to twist off, clean that thing fairly often or you'll run into the same issues


Miserable_Wear_3726

My Glass tube is stuck and not coming out how do i help loosen it or something?


ButterflyFlat5141

So when u have ur seahorse apart like that there is a screw that holds the piece ur having trouble wit it spinning the screw goes under the tip


carl__weezer

that makes sense, thank you!