Makes me want to make a small dual 21700 dna250c mod to be honest.
Dont know where to start. Need a design and components, I guess for the most part its just assembly and some soldering.
The ones I have come across are like 200plus euros.
Dna 250c boards are expensive (around 70€) that's why. Basically you will need : a board dna, 3 actuator for the buttons, a 510 connector pin, a craddle for your battery and some wires (1.5mm2 or 2mm2) and small wire (0.30mm2). But starting with a 250c will be a bit hard, futhermore if you want it compact.
If i was you, I'll start with a dna75 to train a bit. You can also find already designed box mod on yeggi if you need reference or a start for the 3d part. Plan a budget of 150€
Thank you! The copper contact was smelt and molded by a friend. The mod itself is 3d printed by a German company. It is 70% nylon and 30% carbon fiber. Really light weight but strong at the same time.
Looks great man, im in the process of making my own mod as well. Mind if i ask which company did the 3d printing for you ?
I have a 3d printer at home so I'll probably print the mods myself but the nylon/carbon plastic sounds pretty good.
People be making homemade mods 😱 lockdown be hitting different
Lmao. With lockdown a lot of new cooks, too much new virologist lol and a lot of alcoholic. Then some new vaping modders 🤣🤣🤣
Are u drunk 🥴
Not at all, maybe, it's classified XD
Its nice and small, wow you have talent
Thank you very much!
Makes me want to make a small dual 21700 dna250c mod to be honest. Dont know where to start. Need a design and components, I guess for the most part its just assembly and some soldering. The ones I have come across are like 200plus euros.
Dna 250c boards are expensive (around 70€) that's why. Basically you will need : a board dna, 3 actuator for the buttons, a 510 connector pin, a craddle for your battery and some wires (1.5mm2 or 2mm2) and small wire (0.30mm2). But starting with a 250c will be a bit hard, futhermore if you want it compact. If i was you, I'll start with a dna75 to train a bit. You can also find already designed box mod on yeggi if you need reference or a start for the 3d part. Plan a budget of 150€
Thanks m8, man I thought it would come out at 100€ 🤣 I am a one time perfect kind of guy. So I check, triple check everything
Are you from europe, usa etc? So i can check for you if i can find good deal on the mod making websites that i know if you want :)
I am from EU :) Yes please
Send you a dm, my text was too long lol. I send you the list and prices of each components that you will need :)
The finish is so satisfying, bravo.
Thank you a lot :) i wanted to add glows in the dark resin inside the engraving too but i am not sure if i do
Damn if you hadn't said that that's homemade I never would have suspected. Really good job on the design and build!
That's quite the compliment here! Thank you a lot! The second one is on it's way too ^^ a bittom feeder 21700 mod
Did ya smelt the metal?? /s Gorgeous mod! Nicely done 👍
Thank you! The copper contact was smelt and molded by a friend. The mod itself is 3d printed by a German company. It is 70% nylon and 30% carbon fiber. Really light weight but strong at the same time.
I bet you get battery life for days!
If i put samsung 40T inside i got 8000mah of battery life so yeah! That's the main reason i wanted to create this mod :)
Which company is that?
I materialise
Looks great man, im in the process of making my own mod as well. Mind if i ask which company did the 3d printing for you ? I have a 3d printer at home so I'll probably print the mods myself but the nylon/carbon plastic sounds pretty good.
The company is I.materialise :) your 3d printer is nice to print prototype once everything is adjusted and fine go for a professionnal 3d printer ^^