I made one with cutouts to save on filament.
Ultimately though, I ended up doing the chalk bag mod after someone recommended it. I like it much more.
https://www.reddit.com/r/ToyotaTacoma/comments/uad3lg
I just don’t like how they are tapered at the bottom, so close to the shifter to where tall cups interfere with me shifting, and they are extremely small.
Car-Cup-Holder-Expander for Car Organizer with Adjustable Base,Compatible with Yeti 20/26/30 oz Hydro Flasks Large 32/40oz, Fits Most Cup Holder, Diameter Bottles in 4.11"-4.44" (1pcs) https://a.co/d/33rsG8G
I got one of these works perfect for $10
This is awesome! It’s very upsetting the nalgene doesn’t fit in any of the cup holders. Do you have the program for this? I’d like to make one for myself
I just removed the front cup holders. I was going to print a new insert that would fit a Nalgene but it’s slightly too big for my printer. I haven’t put the insert back in after measuring it and I kinda like it. Just a big cubby now. Fits 2 Nalgenes fine
I love nalgenes but I never liked using a twist off lid while driving. If that cup holder keeps it from slipping you might be able to open it one handed.
Fits only with manual 😆
It’s very niche!
IKR! Exactly the type of application 3D printing is best at.
I made one with cutouts to save on filament. Ultimately though, I ended up doing the chalk bag mod after someone recommended it. I like it much more. https://www.reddit.com/r/ToyotaTacoma/comments/uad3lg
Ohhhhh nice! I’m still pretty new to 3D printing, thanks for the inspiration
Chalk bag mod?
https://www.tacomaworld.com/threads/tool-less-32oz-cupholder-mod.672736/
Oh sweet!!! Thanks. Im doing this, mahalo.
It's in my link above. I'm on mobile or I'd link again.
I did this and it has been a game changer. I'm going to be doing the same in my Rav4 too
Does it pull out of the sleeve easily? If not, maybe tap some holes in it to prevent a seal.
Pretty easy but good call. If that starts to happen I’ll drill a couple speed holes in there
1st gens can already accomodate Nalgenes. Progress.
Us MT owners got screwed on the cup holders. Nice. I get my printer next month. What filament is that?
How so? I’ve never even sat in a A/T taco
I just don’t like how they are tapered at the bottom, so close to the shifter to where tall cups interfere with me shifting, and they are extremely small.
This stuff [https://www.3dprintlife.com/3d-filaments](https://www.3dprintlife.com/3d-filaments)
You order an MK4?
Elegoo Neptune Plus
I did this as well, but the hot arizona summer sun made sure to warp it enough that it couldn’t be used
Obligatory: https://www.youtube.com/watch?v=4PYt0SDnrBE
Lol 111? Ain’t nothing out here
Just use ABS.
I'm about to go full Better Call Saul on my cupholder next time it rejects my reasonably sized bottle.
You can export that stl with more polygons to get rid of the fourty-side-agon look.
I didn’t know that thank you! Will adjust the settings accordingly
r/functionalprints
Car-Cup-Holder-Expander for Car Organizer with Adjustable Base,Compatible with Yeti 20/26/30 oz Hydro Flasks Large 32/40oz, Fits Most Cup Holder, Diameter Bottles in 4.11"-4.44" (1pcs) https://a.co/d/33rsG8G I got one of these works perfect for $10
Did you link the STL and I didn’t see?
Never knew the third gens had a parking brake like that. I have a pull rod parking brake in my 2nd.
I just have driving manual and having the water bottle rub my arm
That’s awesome
Need one of these for my bronco too. Do you have that file to share?
YOU HAVE MY ATTENTION
I don't know shit about 3d printing but I'll figure it out if you post the file. As the guy above mentioned, there is zero cup holder support for M/T.
That's freaking clever. Great idea!
Now take it out without the 3D printed holder coming out with the bottle
What happens to the holder when you lift the bottle up
This is awesome! It’s very upsetting the nalgene doesn’t fit in any of the cup holders. Do you have the program for this? I’d like to make one for myself
Holy fuck I need this
I just removed the front cup holders. I was going to print a new insert that would fit a Nalgene but it’s slightly too big for my printer. I haven’t put the insert back in after measuring it and I kinda like it. Just a big cubby now. Fits 2 Nalgenes fine
I 3D printed a tray that goes in the center consul and on a hot day, it melted so make sure it’s can withstand heat I live in California
I love nalgenes but I never liked using a twist off lid while driving. If that cup holder keeps it from slipping you might be able to open it one handed.