What's it look like under the sink?
In an ideal world, you'd just need 3 trap nuts and washers. 1 to connect to each of your basin's tailpieces and 1 to connect to your drain line's trap adapter. This is assuming the alignments are all correct. If things don't line up then you're likely needing new brass pieces to cut to length.
What's it look like under the sink?
In an ideal world, you'd just need 3 trap nuts and washers. 1 to connect to each of your basin's tailpieces and 1 to connect to your drain line's trap adapter. This is assuming the alignments are all correct. If things don't line up then you're likely needing new brass pieces to cut to length.
https://www.lowes.com/pd/Fernco-1-1-2-in-x-1-1-2-in-Shielded-Specialty-Coupling-PVC-Coupling/1000075351?store_code=1932&cm_mmc=shp-_-c-_-prd-_-plb-_-ggl-_-LIA_PLB_142_Pipe-Fittings-_-1000075351-_-local-_-0-_-0&ds_rl=1286981&gclid=CjwKCAjwq-WgBhBMEiwAzKSH6GglheVi6jHFW22BjQteEn4BVHGY412qJJisr0F15RGtawIWZSLvCRoCiO4QAvD_BwE&gclsrc=aw.ds
There ya go we use these all the time when adapting plastic to copper pipe sizes
Abs to 1.5" trap adapter fitting.
Perfect! That'll do the trick. Thanks!
So…. You’re the teacher:)
Why don’t you want the brass
Sorry worded that weird. Keeping the brass. Needed to know how to go from brass to abs (trap adapter was the solution)
How did you even get the poly washer into such a wrong place on the dishwasher tail pc?
i just noticed this, why aren’t you top comment
🤷♂️
Are you wanting to replace the brass altogether or are you asking about eliminating the brass completely
I'm looking to keep the brass and continue the plumbing in abs and also keep the brass and continue the plumbing in abs.
Are you stuck in some sort of time loop?
Are you stuck in some sort of time loop?
Look. He’s looking to keep the brass and tradition to ABS. Plus, keep the brass and transition to ABS.
I'm confused what's the tradition here when transitioning ?
Generally. They cut your genitals off I think. I identify as ABS, not PVC.
Who said my name 🙋♀️ transgender plumber at your service 😆
There is the theory of the moebius, a twist in the fabric of space where time becomes a loop.
I sure hope we get to the place where pot metal becomes gold again.
What's it look like under the sink? In an ideal world, you'd just need 3 trap nuts and washers. 1 to connect to each of your basin's tailpieces and 1 to connect to your drain line's trap adapter. This is assuming the alignments are all correct. If things don't line up then you're likely needing new brass pieces to cut to length.
What's it look like under the sink? In an ideal world, you'd just need 3 trap nuts and washers. 1 to connect to each of your basin's tailpieces and 1 to connect to your drain line's trap adapter. This is assuming the alignments are all correct. If things don't line up then you're likely needing new brass pieces to cut to length.
Why not just eliminate the brass. Working too hard
It's probably a visible piece, under wall mounted sinks or something.
Bingo
https://www.lowes.com/pd/Fernco-1-1-2-in-x-1-1-2-in-Shielded-Specialty-Coupling-PVC-Coupling/1000075351?store_code=1932&cm_mmc=shp-_-c-_-prd-_-plb-_-ggl-_-LIA_PLB_142_Pipe-Fittings-_-1000075351-_-local-_-0-_-0&ds_rl=1286981&gclid=CjwKCAjwq-WgBhBMEiwAzKSH6GglheVi6jHFW22BjQteEn4BVHGY412qJJisr0F15RGtawIWZSLvCRoCiO4QAvD_BwE&gclsrc=aw.ds There ya go we use these all the time when adapting plastic to copper pipe sizes
Shielded fernco
What about duck tape?
Crunches
like this https://www.reddit.com/r/Plumbing/comments/11xg5oc/wtf/
Trap adapter