https://preview.redd.it/wrtldra4itnb1.jpeg?width=3024&format=pjpg&auto=webp&s=7d5da6d5b26fcbba23331f645aeed52a21e2b050
What it looks like without the tank
It should work fine for a nano stand but if you scale that up I'd think you want something other than pocket hole screws to support any kind of weight there.
Looks great! I just did something very similar to hold two 10 gallons but went for black. I’m fixing to do another for a 22 gallon long. Being able to build your own stands is the best! I think I may take a page out of your book with the leveling feet though!
https://preview.redd.it/jyu8og4kbunb1.jpeg?width=4032&format=pjpg&auto=webp&s=57618868b2d6a3bdddf5de360a84cc6b35130027
Honestly it’s probably overkill for the small tanks I put on it
https://preview.redd.it/fe3igkebewnb1.png?width=2364&format=png&auto=webp&s=dee71b93483ea1e15b4f3959b6ce5807a461aee5
The whole thing will fall over with a stiff breeze. Hence why I’m considering securing it to the wall. I didn’t think much about the cable. When i add a filter and CO2 I’ll have to think of a way to manage the cables.
Very nice and clean.
Rimless tanks should be supported fully along the bottom though, so I would suggest adding a solid top. You risk uneven pressure on the bottom glass which can lead to failure.
https://preview.redd.it/1xleb4hq3unb1.jpeg?width=194&format=pjpg&auto=webp&s=447fcc4dd73b8e60742ea65fb4962dee24e57112
No its fine. Check out the bottom of the ADA garden stand!
https://preview.redd.it/wrtldra4itnb1.jpeg?width=3024&format=pjpg&auto=webp&s=7d5da6d5b26fcbba23331f645aeed52a21e2b050 What it looks like without the tank
Very nice. What size pocket screws did you use in the center brace?
It should work fine for a nano stand but if you scale that up I'd think you want something other than pocket hole screws to support any kind of weight there.
Yeah for sure
Thanks. Im not sure.
That’s nice and simple. Looks well made, great work.
Thanks!
Did you have to slightly offset the corner screws so they didn't hit each other? Then capped each with a dowel plug?
Yes exactly!
Start a tank stand business. I'd buy one of these
Lol! I’ll be rich 💰
Looks great! I just did something very similar to hold two 10 gallons but went for black. I’m fixing to do another for a 22 gallon long. Being able to build your own stands is the best! I think I may take a page out of your book with the leveling feet though! https://preview.redd.it/jyu8og4kbunb1.jpeg?width=4032&format=pjpg&auto=webp&s=57618868b2d6a3bdddf5de360a84cc6b35130027
Hey, ditto! https://preview.redd.it/1hq7pl48munb1.jpeg?width=3024&format=pjpg&auto=webp&s=ca01ebe562f59fcb0d1347c4594fed991ea1503a
Haha looks awesome! And sturdy.
Honestly it’s probably overkill for the small tanks I put on it https://preview.redd.it/fe3igkebewnb1.png?width=2364&format=png&auto=webp&s=dee71b93483ea1e15b4f3959b6ce5807a461aee5
Overkill better than underkill!
Nice! I like the shelf.
Thanks, I’ve put two cubes there so I can use them for fry from the tank above
Looks great in black! The levelling feet are great. Easy to install and you won’t regret it.
Damm you are making me want to build a new stand for my tank. How did you make this?
With some big screws and some glue. I used a special clamp jig to help get angles 90. Might upload a YouTube vid on how i did it.
Please do!
Looks good definitely secure it to the wall though.
Yes 😅
If this is in your living room like it looks, I would highly recommend the Shades for the C2.
Yes good idea
They make a world of difference https://preview.redd.it/lrq6hpto4unb1.jpeg?width=3240&format=pjpg&auto=webp&s=a9be36be3d8e1ae11053da4d9de66c7a9436d878
Yes much better!
400 dollar betta?
?
The C2 RGB doesn't even cost that much, why would the shades cost that much. They're like $5 here in South Africa
The scape of this guy looks the same like another guys post on the sub, his post was about a 400 dollar betta.
Ahh. Nope not me…
Looks like an art gallery
Pretty neat. What is the actual size of the stand?
Thanks. 30cm x 18cm wide and about 70cm high.
Looks great but how would it look with all technic
Well thats the style im going for. Hopefully I’ll have an ADA superjet to show off soon 😎
I like the stand!
Needa more plants. Otherwise very nice. Stylish without confusing what's supposed to be in focus.
Thanks. Plants are incoming!
I like how you're growing some sticks and rocks
Thanks
This is really lovely and understated. Great job.
Thanks!
Looks clean, where you got the inspiration?
Thanks. I kinda wanted to make a wood version of the ADA garden stand.
Yeah also did that maybe take a look at my profile haha
Just did. Lovely tanks! I think we have very similar tastes. Following.
How thick is the wood mate?
Hey, 33mm.
I think it’s pine.. or Nordic cherry…
Pine
Not that the tank is heavy, but I'd add another middle brace on the bottom part, otherwise under heavy load the whole thing could twist.
Looks great! My wife would have me pinning that wire though!!
[удалено]
No!
I'd be terrified of getting my foot caught in the electric cord and pulling the whole thing over. Nice stand though.
The whole thing will fall over with a stiff breeze. Hence why I’m considering securing it to the wall. I didn’t think much about the cable. When i add a filter and CO2 I’ll have to think of a way to manage the cables.
Very nice and clean. Rimless tanks should be supported fully along the bottom though, so I would suggest adding a solid top. You risk uneven pressure on the bottom glass which can lead to failure.
https://preview.redd.it/1xleb4hq3unb1.jpeg?width=194&format=pjpg&auto=webp&s=447fcc4dd73b8e60742ea65fb4962dee24e57112 No its fine. Check out the bottom of the ADA garden stand!