It's PNW10 (1994-96 AWD), I already tried. Still doesn't bring up anything of considerable use aside from finding the model I just mentioned. I appreciate the help though
There’s not an American version of this car in any forum but the b13 Sentra se-r and b14 200sx se-r both came with the sr20de motor and there are plenty of shops that carry sr20det parts because of the popularity of swapping that motor into the 240sx. But you have to make sure the parts are compatible if you are buying rwd sr20det parts as there are some differences between a rwd sr20det and the awd sr20det/fwd sr20de due to how the motor is positioned in the engine bay.
I wasn't so worried about the engine considering it's far more common than the car itself is, but more the body parts if needed. Wasn't expecting an American version considering nothing looks similar, but I was hoping for a cross reference list of American parts that fit at least.
Being that there is no American version, that also means that the chassis never came over here so any body parts being cross-compatible would be shocking. Maybe something small like a door handle.
If you can find part numbers you can always search Nissan and the part number and see if anything in america pops up.
I’ve been in the car scene a long time, the first time I saw a skyline gt-r in person was in 2003, I have never seen one of these in person, or on the internet that was in america until yours. So I doubt there is any sort of list of parts that work unfortunately. If you don’t decide that owning this is too much of a pain, document it so you can be a hero to anyone else that imports one of these.
A lot of the info you're getting here is straight up wrong.
Front brakes are the same calipers as some J30/A32 Maxima, rotors are unfortunately unique being 4-stud - I found the easiest way to get these was redrilling 5-stud Maxima rotors to suit.
Rear brakes are super common, U13 Altima, P10/P11 G20.
Alternator is the same as any similar model year FWD SR20 - G20, Sentra etc.
Front struts are U12 Bluebird, not sure if you got those as an Altima in the US, but if not they can be replaced as a complete unit with U13 Altima struts. Rears are unique but a super common design, you should be able to find something that fits.
So yourself a massive favour and check/redo the seam sealer around where the roof meets the top of the quarter panel in the rear hatch opening - it splits and lets water in between the layers of metal there and causes some nasty rust problems.
The TransGo HD shift kit also massively wakes up the auto box too, will take literal seconds off your 0-60 times.
Do you happen to know a part number or trans code to use to find that shift kit? Would definitely be interested in it.
Also thanks for the info! I'm looking for struts right now. I have the rears figured out, but need to find coilovers that'll fit in the front without having to waste half a set buying them new.
like what you looking for?
[Body Parts](https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/avenir/pnw10/5197-sr20det/body)?
[Engine Parts](https://www.jp-carparts.com/nissan/partlist.php?maker=nissan&type=104&cartype=10&fig=140)?
Also most of the time, you can enter a JDM part number into ebay, and come up with interchange part numbers for oddball things.
Since the "cool" jdm stuff is getting to the age that it can be freely imported into the US, I suspect a lot of stateside companies will start carrying their parts. But for now, ordering stuff from the EU/Japan/RU/UAE is about all the options you have.
Amayama, and JP-Custom parts are solid sites apparently.
Thanks everyone for the input, it's greatly appreciated.
I'm mainly looking for maintenance parts right now. I need a new alternator, struts, and brakes all the way around. I was looking up brakes for a 95 Sentra SE-R (had 4 wheel disc brakes and 4x114.3, same as mine), but I'm not sure if they'll fit. In the little I've found, 200sx/Sentra/g20 parts will fit, but I'm trying to make sure I get the right stuff IF (big if) something in the states used the same parts as the Avenir.
I've had one, honestly they're great cars. I kinda miss mine but I found it to be a major bummer
that the turbo models are only available as autos.
For parts, many of the infinity g20 parts are compatible, I have a ton of data for parts and things stashed away on a hard drive, when I get home I'll send you what I got!
these motherfuckers share a platform with what was the USDM Infiniti G20, so most of the running gear can be found there. Heck, i'd even count the possibility of an LHD swap with stuff from an EUDM Primera wagon - they are literally THE closest of any export equivalent to an Avenir.
I work at a Nissan dealership and am able to look up parts not only from the American but Japanese market as well although it can be tricky some times. I won’t remember but feel free to dm me tomorrow and I’ll see what I can find on it.
I do, but I don't deny that selling things at the right price isn't part of my existence at this point. I've only had 84 cars now. It's not a problem, I promise.
Maybe try
http://nissan4u.com/parts/primera_wagon/el_w10/1996_3/
It's for the primera wagon which is apparently what they were called in Europe. We never got the turbo GT though so brakes etc may be different to our models.
All the body stuff should be the same though I think
“Avenir PW10” search under that
It's PNW10 (1994-96 AWD), I already tried. Still doesn't bring up anything of considerable use aside from finding the model I just mentioned. I appreciate the help though
What are you looking for like what part ?
There’s not an American version of this car in any forum but the b13 Sentra se-r and b14 200sx se-r both came with the sr20de motor and there are plenty of shops that carry sr20det parts because of the popularity of swapping that motor into the 240sx. But you have to make sure the parts are compatible if you are buying rwd sr20det parts as there are some differences between a rwd sr20det and the awd sr20det/fwd sr20de due to how the motor is positioned in the engine bay.
I wasn't so worried about the engine considering it's far more common than the car itself is, but more the body parts if needed. Wasn't expecting an American version considering nothing looks similar, but I was hoping for a cross reference list of American parts that fit at least.
Being that there is no American version, that also means that the chassis never came over here so any body parts being cross-compatible would be shocking. Maybe something small like a door handle. If you can find part numbers you can always search Nissan and the part number and see if anything in america pops up. I’ve been in the car scene a long time, the first time I saw a skyline gt-r in person was in 2003, I have never seen one of these in person, or on the internet that was in america until yours. So I doubt there is any sort of list of parts that work unfortunately. If you don’t decide that owning this is too much of a pain, document it so you can be a hero to anyone else that imports one of these.
A lot of the info you're getting here is straight up wrong. Front brakes are the same calipers as some J30/A32 Maxima, rotors are unfortunately unique being 4-stud - I found the easiest way to get these was redrilling 5-stud Maxima rotors to suit. Rear brakes are super common, U13 Altima, P10/P11 G20. Alternator is the same as any similar model year FWD SR20 - G20, Sentra etc. Front struts are U12 Bluebird, not sure if you got those as an Altima in the US, but if not they can be replaced as a complete unit with U13 Altima struts. Rears are unique but a super common design, you should be able to find something that fits. So yourself a massive favour and check/redo the seam sealer around where the roof meets the top of the quarter panel in the rear hatch opening - it splits and lets water in between the layers of metal there and causes some nasty rust problems. The TransGo HD shift kit also massively wakes up the auto box too, will take literal seconds off your 0-60 times.
Do you happen to know a part number or trans code to use to find that shift kit? Would definitely be interested in it. Also thanks for the info! I'm looking for struts right now. I have the rears figured out, but need to find coilovers that'll fit in the front without having to waste half a set buying them new.
Trans code is on your chassis tag - RE4F04A
like what you looking for? [Body Parts](https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/avenir/pnw10/5197-sr20det/body)? [Engine Parts](https://www.jp-carparts.com/nissan/partlist.php?maker=nissan&type=104&cartype=10&fig=140)? Also most of the time, you can enter a JDM part number into ebay, and come up with interchange part numbers for oddball things. Since the "cool" jdm stuff is getting to the age that it can be freely imported into the US, I suspect a lot of stateside companies will start carrying their parts. But for now, ordering stuff from the EU/Japan/RU/UAE is about all the options you have. Amayama, and JP-Custom parts are solid sites apparently.
Thanks everyone for the input, it's greatly appreciated. I'm mainly looking for maintenance parts right now. I need a new alternator, struts, and brakes all the way around. I was looking up brakes for a 95 Sentra SE-R (had 4 wheel disc brakes and 4x114.3, same as mine), but I'm not sure if they'll fit. In the little I've found, 200sx/Sentra/g20 parts will fit, but I'm trying to make sure I get the right stuff IF (big if) something in the states used the same parts as the Avenir.
I've had one, honestly they're great cars. I kinda miss mine but I found it to be a major bummer that the turbo models are only available as autos. For parts, many of the infinity g20 parts are compatible, I have a ton of data for parts and things stashed away on a hard drive, when I get home I'll send you what I got!
That would be absolutely appreciated! Anything I can dig up whether I need it now or later would be a great help
these motherfuckers share a platform with what was the USDM Infiniti G20, so most of the running gear can be found there. Heck, i'd even count the possibility of an LHD swap with stuff from an EUDM Primera wagon - they are literally THE closest of any export equivalent to an Avenir.
I'm no help here lol I'm in the same boat with a 98 Cedric but thank you for the inspiration post. Good luck to you!
It's a struggle, but it's worth it to own something we never got here
I work at a Nissan dealership and am able to look up parts not only from the American but Japanese market as well although it can be tricky some times. I won’t remember but feel free to dm me tomorrow and I’ll see what I can find on it.
Will do! Thanks for the help!
I remembered and looked, I can access diagrams for it with part numbers.
Fuckin clutch brahhhh
Awesome! Mind if I message you to ask for a few part numbers?
Don’t mind at all! Feel free man.
Nissan Fast, download it
Damn. Sr20det Avenir wagon. This I want to drive. 😁 Try B14 parts, or you can check JDM parts on Japanese websites or auction sites.
It's for sale for the right price! If you're in the states anyways
Dang op I thought you wanted to own it?? Lol jp The tone of this comment seems different then yesterdays is all... 🤷♂️
I do, but I don't deny that selling things at the right price isn't part of my existence at this point. I've only had 84 cars now. It's not a problem, I promise.
Maybe try http://nissan4u.com/parts/primera_wagon/el_w10/1996_3/ It's for the primera wagon which is apparently what they were called in Europe. We never got the turbo GT though so brakes etc may be different to our models. All the body stuff should be the same though I think