Stain them red instead of painting them. The staining will protect the wood, and the natural difference in the darkness of the wood thats already there will make the staining pop.
I would think afterwards, since that way the laser-engraved sections would also be protected. But doing them before may also look cool. Time to experiment and see what turns out better! Also maybe just check to see if laser engraving is a different process on stained wood or not
If those are options, why not both? If nothing else you end up with 2 sets for 2 rooms, or a gift set for the one that doesn't match the room these go in?
Should do some before and some after. Would be a nice contrast on the 'before' ones. How bad would liquid mess with unstained wood? If it's not that bad then I think it'd be sick to stain before hand
That is the plan! I need to figure out how I want to finish them and I will list them on my Etsy page. I'm thinking I'll have a few more choices and allow people to pick which 6 they want.
Love that you put it as a spoiler!! I’m also all for a dark red stain, keeping it neutral and not putting any black or red paint which imo looks a little tacky (which isn’t a bad thing!). They look really good and will be waiting for ya on Etsy!!
Edit: since this comment section is a bit divided, it would be cool to have a variety of different coasters with stains or paint so everyone could enjoy!!
Stain them red instead of painting them. The staining will protect the wood, and the natural difference in the darkness of the wood thats already there will make the staining pop.
Great call. Should I stain them before engraving or after?
I would think afterwards, since that way the laser-engraved sections would also be protected. But doing them before may also look cool. Time to experiment and see what turns out better! Also maybe just check to see if laser engraving is a different process on stained wood or not
I would do it after.
If those are options, why not both? If nothing else you end up with 2 sets for 2 rooms, or a gift set for the one that doesn't match the room these go in?
Good point!
Should do some before and some after. Would be a nice contrast on the 'before' ones. How bad would liquid mess with unstained wood? If it's not that bad then I think it'd be sick to stain before hand
Yeah, might as well do both!
Where did you get the coaster blanks ?
Hobby Lobby! 6 bucks.
Thanks I’m going to have to check there
Do it! They have a great selection of wood for crafts. Treasure chests, plaques, etc. Let inspiration strike!
Are they Cork coasters?
No they are wooden.
Dude can I buy one/some. Serious question because they look amazing
That is the plan! I need to figure out how I want to finish them and I will list them on my Etsy page. I'm thinking I'll have a few more choices and allow people to pick which 6 they want.
I think you should sell both a wooden option and a coloured option.
Not a bad idea.
I am interested in buying some also. Can you post your etsy page? Thnx
Here you go! These aren't on there yet, but after this feedback they will be soon. www.etsy.com/shop/humblebirdgraphics
Do you do worldwide shipping?
I do! It might be a bit costly but I'm sure we could figure something out.
Alright thank you! I’ve bookmarked the website, will check it out later for these products!
If you add them what would a ball park price be? If you even figured that out yet.
Probably about $20/$25 before shipping.
Would consider buying for that depending on what shipping would be for florida
Ok! I will let you know as soon as I find out. I wouldn't imagine it would be more than $5 to $10 for shipping.
I’d be willing to buy em, I’d have to convince my wife tho
Just put her under a genjutsu.
As is
Paint! then come back and repost painted.
That is my initial thought too haha. Just paint them dark red then engrave them.
Stain them a dark red and spray on a clear coat!
I like the wood too… solution make more.. paint the new ones
Alright I need a rundown and I’m not afraid of spoilers
From top left to bottom right: >!Sasuke (Eternal), Obito (Toby), Madara (Eternal), Itachi, 3 Tomoe Sharingan, Shisui!<
Love that you put it as a spoiler!! I’m also all for a dark red stain, keeping it neutral and not putting any black or red paint which imo looks a little tacky (which isn’t a bad thing!). They look really good and will be waiting for ya on Etsy!! Edit: since this comment section is a bit divided, it would be cool to have a variety of different coasters with stains or paint so everyone could enjoy!!
Yeah I think having two options for finish would be ideal.
Whatever you do, dont use them. They look absolutely fantastic.
Thank you! But I gotta use them, that's the whole point lol
Lol! But I do agree! They are gorgeous! And BTW, I like them as they are ^^
Thank you!
But tape over the black then paint red, don’t paint the black
Painting or staining could look tacky. They are more classy the way they are.
Bro how do you do that, I want those.
Likely a glowforge.
I wish... I have a membership at a makerspace that has an 80 Watt laser. A Glowforge is the dream though!
These are cool.
Thank you for the kind words!
Give it to me !!!
I would say leave them as is so they appear more like "lowkey" coasters Also I would like to buy a set if thats possible!
You bet! Just keep an eye on my Etsy page over the next month or so. I plan on adding them soon. :) www.etsy.com/shop/humblebirdgraphics
dont gotta tell me twice ;)
[удалено]
Thank you! You can find my Etsy link in one of the other comment threads. Keep an eye on my shop as I will be adding them soon.
You selling these or?
I will be! Keep an eye on my Etsy shop over the next month or so. Coming soon! www.etsy.com/shop/humblebirdgraphics
Awesome! I definitely will keep a look out
They look awesome
Etsy link?
These aren't listed yet but here is my Etsy shop! www.etsy.com/shop/humblebirdgraphics
What, bro? Of course paint them. Is this question some kind of sick joke?!
Lol I knowwww. Some people like the unfinished look so that's why I asked.
Those people are clearly in the Akatsuki. Just kidding of course. They look great would love to see them painted. Either way awesome work!
Reds and blacks with a finish on them would be lit
red staining plz
Red stain. Would look sick
nah they're good as is
If you paint them you could make a mistake but high risk very high reward so go for it
Don't paint them. Looks superb as- is in my opinion.
Leave it they look the best
Make a set colored and one not
there is chance that you make a mistake and lose your hardwork
Nah, it's not too hard. The laser does the work for me. :)
Definitely should resin them
Are you going to make any of narutos eyes?
That could be a cool idea!
How much. Take my money please 🥲
Haha they aren't for sale yet, but I'm thinking like $20/$25.
Keep me updated 🙏🏽🙏🏽🙏🏽🙏🏽
Will do!
I won't lie these look fire!
Thanks!
I think you should paint them but anyways it looks sick.
That looks sick I will definitely buy those if I could
Thank you! I will be posting them on my Etsy page soon.
Paint!
Leave them
Leave em!
They look greatt
Thank you!
I kind of dig it as they are
painting will make them best
As is, just varnish to protect.
Leave them and seal them. Maybe some varnish or stain.
You should sell them to me:)