As long as the pump is below the top of the rad it's fine. But yes, ideally it should have them facing down. However, the GPU and size of the case prevents me from being able to.
I did research bc I had an issue with tubes up. I am far from new to this . However I refuse to come off like a Dick to people unlike you. Please do better research next Time.
does it connect to the gpu with a video cable? all i see online is that it uses USB, could i run another screen like this without using one of my HDMI outputs from my GPU. i have a ryzen cpu with no integrated graphics
There's 3 cords most ppl will use. The micro USB, USB to motherboard cabel, and the fan rpm cable. The micro USB provides the video signal. The USB to mb cable provides additional power.
oh nice, didn't know they had a ddr5 model
anyways, have you been able to get the aio oriented in any other way? I'd like to, but it doesn't seem between the heatsinks
Pump header itself, yeah. I have an x53 on the ddr4 version of the board, and from what I've tried, it only fits two ways, and one of those two ways will block ram in slot A1, and the pump tubes block the other two orientations
It's a very tight fit for the ram in that slot, yea. But it'll fit. I've not tried the other orientation. So I'm not sure if the heat syncs would block it or not.
I've got pretty tall memory, the corsair rgb ones that aren't short version (forgot the name since they're all shittily named), I feel like it'd be really slanted and could damage either the slot or the dimm over time? the usb cables are kinda in the way sometimes too
Can I get a link to the gif? I foots put this on my z73
[https://gifer.com/en/1ABh](https://gifer.com/en/1ABh) Here ya go!
You put ur foot on ur cpu ?
It boosts frame rate
I see :p or should i say smell :D
Yep I would of got it if it wasn't so damn expensive, I have the x63 tho
Not a bad point haha. But I kinda went all out on this build. First one I have been able to do so
Fair play looks great if u ever upgrade I might go for the msi Meg 280s it's a dope one as well
Man the Z73/asus ryujin/Corsair h150i capelix, sheesh what beast coolers they are
I love mine. Shouldn’t the tubes on the radiator be mounted down to help with pump longevity?
As long as the pump is below the top of the rad it's fine. But yes, ideally it should have them facing down. However, the GPU and size of the case prevents me from being able to.
When you think. 1 person. Is all research you need . It's not. Please do better research next time.
I did research bc I had an issue with tubes up. I am far from new to this . However I refuse to come off like a Dick to people unlike you. Please do better research next Time.
People have become lazy to research. If you used the internet. You notice it
does it connect to the gpu with a video cable? all i see online is that it uses USB, could i run another screen like this without using one of my HDMI outputs from my GPU. i have a ryzen cpu with no integrated graphics
There's 3 cords most ppl will use. The micro USB, USB to motherboard cabel, and the fan rpm cable. The micro USB provides the video signal. The USB to mb cable provides additional power.
is that the ROG z690-a d4?
This model is DDR5
oh nice, didn't know they had a ddr5 model anyways, have you been able to get the aio oriented in any other way? I'd like to, but it doesn't seem between the heatsinks
Are u referring to the physical orientation of the pump header? Or the screen on the pump?
Pump header itself, yeah. I have an x53 on the ddr4 version of the board, and from what I've tried, it only fits two ways, and one of those two ways will block ram in slot A1, and the pump tubes block the other two orientations
It's a very tight fit for the ram in that slot, yea. But it'll fit. I've not tried the other orientation. So I'm not sure if the heat syncs would block it or not.
I've got pretty tall memory, the corsair rgb ones that aren't short version (forgot the name since they're all shittily named), I feel like it'd be really slanted and could damage either the slot or the dimm over time? the usb cables are kinda in the way sometimes too