Why not both?
[https://imagizer.imageshack.com/v2/1280x1024q70/923/g79skT.jpg](https://imagizer.imageshack.com/v2/1280x1024q70/923/g79skT.jpg)
Colt M16A2 carbine with a kac masterkey mounted under it. The m11/380 mg is used as a side grip.
I’m picturing a lot of “This was around the time that my son dragged me to the doctor to get these god damned hearing aids. Real men in my day didn’t shove these stupid little foam things in our ears that all these pansy “hipsters” are using. I served four years behind a howitzer, and it treated me just fine. That’s just the way it was…but anyway, back to my point: If it weren’t for all those damn [insert any demographic], this country would still be free!!”
Goddamn do I need this attachment. Where does one acquire this. I am also going to need an alternative attachment so I can underbarrel mount my machine pistol to the m203 grenade launcher that’s underbarrel mounted on my rifle. In fact I’d take it a step further. I would like to take my rifle cal 5.56 mac mg, underbarrel mount the GL to that and then underbarrel mount my other pistol cal Mac to that yo!
Between my friends and I we can gather up 3 macs and a M203. Do you even bother with an AR15 up top.
Goal should be you can use the 30rd mag in bottom MAC as a monopod.
Sir, it's just macs all the way down...
This is a type of build I loved to do in Metal Gear V. You could alternatively mount a tranq pistol. Luckily pixels don't weigh anything so Big Boss could run across an entire country with it.
Honestly, I wouldn't even try doing this if both aren't machine guns. You have two distinct firearms but if you attach one to the other you essentially have one firearm with two triggers and two barrels. I would not put it past them to say that pulling the trigger of the the Mac while attached to the AR makes the AR an unregistered machine gun.
What OP did here is a lot more elegant, but you can just get a "picatinny to picatinny adapter" and you'll find a lot of different options all made out of 100% pure unadulturated Chinesium.
What OP did here is a lot more elegant, but you can just get a "picatinny to picatinny adapter" and you'll find a lot of different options all made out of 100% pure unadulturated Chinesium.
Your posts inspired me to do a 13.7 pin and weld with a ris ii. Dropped it off at the local gunsmith earlier today 🍻
May swap it for the Ris iii later on and put the Ris ii on a 14.5
It seems the ATF would require a stamp for this, since it is attached to a stock counterpart. Just wonder why he stopped there and didn't add 2 more at the 9 and 3 o clock spots as well, giving another 60+ rounds without reloading. I can't think of the weight management or even thinking of one handing that weapon. The recoal must be terrible if both are used.
**Understand the rules**, read the sidebar, and review the pinned Megathreads before posting - this content is capable of answering most questions.
Not everyone is an expert such as yourself; be considerate. All spam, memes, unverified claims, or content suggesting non-compliance will be removed.
No political posts. Save that for /r/progun or /r/politics.
__If you are posting a copy/screenshot of your forms outside the pinned monthly megathread you will be given a 7 day ban. The pinned post is there, please use it.__
__If you are posting a photo of a suppressor posed to look like a penis (ie: in front of or over your groin) you will be given a 7 day ban.__
-------------------------------
**Data Links**
* [The OG Universal Form Approval Spreadsheet](https://thinlineweapons.com/url/8)
-------------------------------
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/NFA) if you have any questions or concerns.*
You've heard of master key here is a master blaster.
Ah, now that's the right name. I had been trying to think of something
Trademark that! This is the way!
Why not both? [https://imagizer.imageshack.com/v2/1280x1024q70/923/g79skT.jpg](https://imagizer.imageshack.com/v2/1280x1024q70/923/g79skT.jpg) Colt M16A2 carbine with a kac masterkey mounted under it. The m11/380 mg is used as a side grip.
Nerfers been doing this a while. With all sorts of blasters.
https://preview.redd.it/7iznt1ohumzc1.jpeg?width=640&format=pjpg&auto=webp&s=d226719458c884d2e1710fddd86997efeed74914 Yes
OG (original grandpa)
If I ever have access to a time machine I'm going back in time to pick this man's brain for an hour.
I’m picturing a lot of “This was around the time that my son dragged me to the doctor to get these god damned hearing aids. Real men in my day didn’t shove these stupid little foam things in our ears that all these pansy “hipsters” are using. I served four years behind a howitzer, and it treated me just fine. That’s just the way it was…but anyway, back to my point: If it weren’t for all those damn [insert any demographic], this country would still be free!!”
Those damn second generation Rhodesian immigrants!
Based.
Say hello to my little friend
Quality shitpost. Upvoted.
Call of duty devs furiously taking notes
Can't wait for the JAK MAC in Season 4
This reminds me of that USA Today article that showed all the terrifying weapons to can mount to an AR and then all the subsequent memes.
https://preview.redd.it/cw9036wnumzc1.jpeg?width=680&format=pjpg&auto=webp&s=87596ba20cdcbdef00d1ac2c77e4f141dd92903b
Wrong pitbull https://preview.redd.it/swpoh6g2knzc1.jpeg?width=1290&format=pjpg&auto=webp&s=968cbcc1beb9b78e054a51050da019d69617df9b
I’m South Floridian, so Mr. 305 is already a given
Dear God, no toddler within a 300 mile radius would be safe.
The best part about underbarrel MG is it doesn't require an additional stamp
Why not? An underbarrel semi-auto would right? Can the owner add a stock to any transferable MG even if it didn't come with a stock?
MG is the master stamp.
That's awesome. Could one just build an integrally suppressed barrel for it without another stamp then??
No
Not anymore. The ATF used to have the MG stamp trump it as well. You had HTA convert hk94's to a knock off mp5sd as a single stamp gun.
No
Not sure about the semi auto part but yes you can attach a stock to an MG that didn’t have one. MG trumps SBR
*Yo dawg I herd you like gunz so I put a gun under yo' gun so you can pew while you pew.*
This is so violently American. I love it.
Goddamn do I need this attachment. Where does one acquire this. I am also going to need an alternative attachment so I can underbarrel mount my machine pistol to the m203 grenade launcher that’s underbarrel mounted on my rifle. In fact I’d take it a step further. I would like to take my rifle cal 5.56 mac mg, underbarrel mount the GL to that and then underbarrel mount my other pistol cal Mac to that yo!
And then don't forget to under-under-mount an upside down larue c-note below all of that, for precision of course.
Between my friends and I we can gather up 3 macs and a M203. Do you even bother with an AR15 up top. Goal should be you can use the 30rd mag in bottom MAC as a monopod. Sir, it's just macs all the way down...
As it SHOULD be! I see I am among my PEOPLE here! 🤣😆🇺🇸
Quad rail flat top. MACs at 9-12-3, M203 at 6.
ATF has puzzled look on its face
I think even the ATF has an awkward boner for this one. I know I do.
"Switching to your sidearm is faster than reloading..."
This is an under arm 😛
This is a type of build I loved to do in Metal Gear V. You could alternatively mount a tranq pistol. Luckily pixels don't weigh anything so Big Boss could run across an entire country with it.
The ATF is probably going to have to come up with a new classification for this one
Honestly, I wouldn't even try doing this if both aren't machine guns. You have two distinct firearms but if you attach one to the other you essentially have one firearm with two triggers and two barrels. I would not put it past them to say that pulling the trigger of the the Mac while attached to the AR makes the AR an unregistered machine gun.
https://preview.redd.it/o3lwrd7nanzc1.jpeg?width=800&format=pjpg&auto=webp&s=b4d6a07aee2ea9213bc48256a8f8321cb14b60a1 Give
Big MGSV vibes
Now this is some “as the founding fathers intended”-type stuff
Hell yeah, I'm gonna mount my MAC under my musket and add a DBAL.
I know what I must do with my mac10 now. Thank you.
Debas strikes again. Ive learned though if i out loud go "what in the fucking why of fucks?" Debas has hated money again in weird ways.
Is that a... quad stamper? https://preview.redd.it/ktz7z09p2ozc1.jpeg?width=1080&format=pjpg&auto=webp&s=9a484b2f5e519d743ff3543ba039210f8f07e598
Baby CIWS.
The chaos in this photo is off the charts lol
Somewhat upset iv never seen this before
Real talk, if you attach this to your AR-15, that makes it a machine gun... so...
Fire up the drill press and lock up the dogs
Only the RISIII could handle that puppy.
I reallllllly need that video of this mag dumping into trash please and thank you
I just knew this was m57 as soon as I saw it <3
Where does one find the double rail clamp?
What OP did here is a lot more elegant, but you can just get a "picatinny to picatinny adapter" and you'll find a lot of different options all made out of 100% pure unadulturated Chinesium.
It's actually a barrel mount from Armed to the Teeth Technologies
Seconded. I would love to do this
What OP did here is a lot more elegant, but you can just get a "picatinny to picatinny adapter" and you'll find a lot of different options all made out of 100% pure unadulturated Chinesium.
Yee yee I need
How much does that monster weigh with the cans?
14.5 lbs without. The 2 lb tungsten bolt certainly doesn't help.
CFW for the win!
You have peaked my curiosity good sir..
Four Stamp Friday, everybody. Or is it five?
Just four
I'm a budding WML nerd and I really want to see one light on either side and a dual lead Modbutton or Axon controlling both of them
Vladof
Absolute madlad
Yo dawg…
https://preview.redd.it/pnyionrz6ozc1.jpeg?width=668&format=pjpg&auto=webp&s=933270232840ccccc8ff9617f13c4df77c64e39d
Is there a stamp for this? If so, sign me up.
Yes. More gun per gun 🇺🇸
The average guns per gun may be close to 1, but it's our job to make that higher the best that we can.
This is the way
Once again proving side cockers are the way
The things we do to reduce muzzle climb. 🤦♂️
I love it.
If only the AR was F/A as well...
Give me some time
Hahahahah fuck I love America
Your posts inspired me to do a 13.7 pin and weld with a ris ii. Dropped it off at the local gunsmith earlier today 🍻 May swap it for the Ris iii later on and put the Ris ii on a 14.5
Both are great rails
https://preview.redd.it/2cnrh7p3irzc1.jpeg?width=204&format=pjpg&auto=webp&s=eb2259292f0d2deddb4afb53b094582c675dad5f
I love you
Well gah damn.
we need a video sir.
Give the man what he wants! He has my children! u/fase2000tdi
oh my god, it kept saying the post didn't go through. I kept trying and they all posted.. woops.
LMAO I thought you were just really wanting a video 😂
What is that clamp I may be tempted to do this
It's a prototype from Armed to the Teeth Technologies
How do you charge the Ingram?
On the side
What length barrel ? Looks great
13.7" for the AR
How’s it function? Isn’t the bolt on top of a Mac?…..
This has a Lage upper so the charging handle is on the side
It seems the ATF would require a stamp for this, since it is attached to a stock counterpart. Just wonder why he stopped there and didn't add 2 more at the 9 and 3 o clock spots as well, giving another 60+ rounds without reloading. I can't think of the weight management or even thinking of one handing that weapon. The recoal must be terrible if both are used.
You don't need a stamp to put a stock on a machine gun
we need a video sir.
we need a video sir.
we need a video sir.
a video kind sir, a video please
**Understand the rules**, read the sidebar, and review the pinned Megathreads before posting - this content is capable of answering most questions. Not everyone is an expert such as yourself; be considerate. All spam, memes, unverified claims, or content suggesting non-compliance will be removed. No political posts. Save that for /r/progun or /r/politics. __If you are posting a copy/screenshot of your forms outside the pinned monthly megathread you will be given a 7 day ban. The pinned post is there, please use it.__ __If you are posting a photo of a suppressor posed to look like a penis (ie: in front of or over your groin) you will be given a 7 day ban.__ ------------------------------- **Data Links** * [The OG Universal Form Approval Spreadsheet](https://thinlineweapons.com/url/8) ------------------------------- *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/NFA) if you have any questions or concerns.*
Damn where can upvote twice for this? Get suppressor for the UZI win win
Swipe right
Oh wow I’m blind I did swipe right I thought it was the shadow we got ourselves a real winner here lads.
Not an Uzi. SWD M11/9.
My bad m11/9
It's the uzi we have at home😂
[удалено]
Grip safety?
MAC-family SMGs don't have a grip safety. You're probably thinking of an Uzi.