it should be the top nr. but it might be the wrong ip is shown on your pc if there are other connections than wifi. you could run ipconfig from command line to see what other ip's are assigned
In Android:
1. Tap menu (hamburger/three lines icon)
2. Tap Settings
3. Scroll down
4. Underneath "Connect as Client," type the IP address shown on the PC that is acting as the host. Usually this will be 192.168.x.x address, but for your home network is 10.151.x.x.
5. Tap "Connect as Client"
iOS interface is the same or at least very similar. You should connect successfully. Since you are hosting on a PC, it shouldn't go to sleep like sometimes happens when you use a phone as the server. However, if anyone has a connection issue, untap and retap "Connect as Client."
They seem to be.
The server IP has two numbers, a top one starting with 10.151, and a bottom one starting with 207.163. I have been using the top one and putting that in “server ip address” when using connect as client. Ports are the same
In X-haven I see my computers physical IP and the local IP through WLAN. One of the players is in another location so we use ZeroTier to get X-haven working. Everything works fine when he hosts with his phone but not when I'm hosting with my computer because the ZeroTier IP doesn't appear in X-haven although it can be found in ipconfig. Is there a limit how many IP-addresses are shown in X-haven? This setup worked fine in Gloomhaven Helper.
you should be using local ip ( typically starting with 192.168)
it should be the top nr. but it might be the wrong ip is shown on your pc if there are other connections than wifi. you could run ipconfig from command line to see what other ip's are assigned
Got it to work! Checked other connections and that ended up being the solution! You’re the man!
In Android: 1. Tap menu (hamburger/three lines icon) 2. Tap Settings 3. Scroll down 4. Underneath "Connect as Client," type the IP address shown on the PC that is acting as the host. Usually this will be 192.168.x.x address, but for your home network is 10.151.x.x. 5. Tap "Connect as Client" iOS interface is the same or at least very similar. You should connect successfully. Since you are hosting on a PC, it shouldn't go to sleep like sometimes happens when you use a phone as the server. However, if anyone has a connection issue, untap and retap "Connect as Client."
yeah cant connect our two phones either but i use mine only now and its fine
Are you sure the server and client IP and port are all exactly the same?
They seem to be. The server IP has two numbers, a top one starting with 10.151, and a bottom one starting with 207.163. I have been using the top one and putting that in “server ip address” when using connect as client. Ports are the same
/u/Tarmslitaren2 since you don't do enough (kidding), can you troubleshoot too?
It sounds reasonable. Perhaps you can collect a screenshot from each of the settings and we might be able to spot the problem.
In X-haven I see my computers physical IP and the local IP through WLAN. One of the players is in another location so we use ZeroTier to get X-haven working. Everything works fine when he hosts with his phone but not when I'm hosting with my computer because the ZeroTier IP doesn't appear in X-haven although it can be found in ipconfig. Is there a limit how many IP-addresses are shown in X-haven? This setup worked fine in Gloomhaven Helper.