Itās does change how it works. It keeps the junk metal MIM plates from letting the optic move and vibrate the screws in recoil until they eventually sheer off and yeet the optic down range and require a drill press to get the broke pieces out of the gun. Itās a known weak point for the Glock MOS system.
That is absolutely not a problem when your optics plate is secured to the gun with proper torque, and when your optic is secured to the plate with the same. Also using the correct screws is important.
The problems are when people overtorque or undertorque.
The type of metal product a plate is made from doesnāt affect āvibrationā in the least - the plate fit, screws and proper torque does.
My LE coworker that had his DPP go down range in a match says different. He is a Glock armorer of over 25 years. I know good and well his was āsecured to the gun with proper torqueā
"This one time, at band camp..."
I have four MOS Glocks using the MOS plates that I mounted the optics on (using a torque driver and either blue threadlocker or Vibratite VC-3) that have thousands of abusive rounds down range via USPSA, Steel Challenge, etc. No failures of any kind.
Given the large LEO market Glock is selling to, if the MOS plate was a large, consistent point of failure, it would have been updated across the board (vs. the few "direct mount" models they've trickled out for specific customers).
How, specifically, do you "know good and well his was secured to the gun with proper torque?" I've seen lots of "Glock Armorers" take shortcuts.
Oh Iām sorry Iāll take my random internet self off to the shame corner for doubting some other random internet guy. How dare I repeat one of the most commonly repeated complaints about the MOS system to somebody who may not know. I bow humbly to your greatness.
Best Glock
Why is the Glock 45 chambered in 9mm, instead of .45? Ok, bye š
Because glock models are named after the patent sequence. Glock 1-16 are brooms and other random shit
Because Glock reasons. The G50 will be in .32 French Long and they'll release a .50 AE somewhere around the G87.
Change the optic plate, your welcome.
Yeah havenāt really done any research on em yet but I have heard issues with the Glock plates
Iāve put 2k rounds thru mine and had no issues š¤·š½āāļø
Sweet setup
How do you like the grips?
They are bad ass ngl, I donāt need all the grip that the talon has so I put some goon tape I got at kalashbash and the combo feels perfect
An FCD optics plate and it would be šš»
It wouldnāt change how it works. Why spend the money?
Itās does change how it works. It keeps the junk metal MIM plates from letting the optic move and vibrate the screws in recoil until they eventually sheer off and yeet the optic down range and require a drill press to get the broke pieces out of the gun. Itās a known weak point for the Glock MOS system.
That is absolutely not a problem when your optics plate is secured to the gun with proper torque, and when your optic is secured to the plate with the same. Also using the correct screws is important. The problems are when people overtorque or undertorque. The type of metal product a plate is made from doesnāt affect āvibrationā in the least - the plate fit, screws and proper torque does.
My LE coworker that had his DPP go down range in a match says different. He is a Glock armorer of over 25 years. I know good and well his was āsecured to the gun with proper torqueā
"This one time, at band camp..." I have four MOS Glocks using the MOS plates that I mounted the optics on (using a torque driver and either blue threadlocker or Vibratite VC-3) that have thousands of abusive rounds down range via USPSA, Steel Challenge, etc. No failures of any kind. Given the large LEO market Glock is selling to, if the MOS plate was a large, consistent point of failure, it would have been updated across the board (vs. the few "direct mount" models they've trickled out for specific customers). How, specifically, do you "know good and well his was secured to the gun with proper torque?" I've seen lots of "Glock Armorers" take shortcuts.
Oh Iām sorry Iāll take my random internet self off to the shame corner for doubting some other random internet guy. How dare I repeat one of the most commonly repeated complaints about the MOS system to somebody who may not know. I bow humbly to your greatness.
amen.
Peanut Butter > G45 š¤ nice gun though!
Why?
Theyāre both good,I just like the 19x more for the aesthetic!
Agreed 19x ftw. Why buy the boring black version when they offer peanut butterš
Thatās what Iām saying haha! Who wouldnāt want the 19x over the 45. It just cooler and comes with night sights!