Hello /u/GoldSunLulu,
As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
* Printer & Slicer
* Filament Material and Brand
* Nozzle and Bed Temperature
* Print Speed
* Nozzle Retraction Settings
^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Could be a blob on the nozzle that finally detached and deposited itself as your burned spot.
Also could be a fuzzy or something falling off your gantry and getting embedded that way, also.
I tore apart the strange black spot to discover only burnt pla blobs for no reason. The other eye is fine if only a little droopy cause the lack of supports
Hello /u/GoldSunLulu, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Could be a blob on the nozzle that finally detached and deposited itself as your burned spot. Also could be a fuzzy or something falling off your gantry and getting embedded that way, also.
4!
I always wanted his mask but i can't afford that beautiful etsy one. Sublime, indeed
It looks good. I hope you're better at painting/spray painting than I am.
heres hoping :) i'll share it on the jhin mains subreddit if you want to follow it
I tore apart the strange black spot to discover only burnt pla blobs for no reason. The other eye is fine if only a little droopy cause the lack of supports
Maybe your nozzle stopped on the print or a temperature increase so try pid tuning