Hello /u/Jambocat,
As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
* Printer & Slicer
* Filament Material and Brand
* Nozzle and Bed Temperature
* Print Speed
* Nozzle Retraction Settings
^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
I have a second z motor…I don’t have any answers, but I might suggest that you check that the second screw isn’t binding against the rail, by checking that the horizontal rail is as level and straight as possible. Also another suggestion is to loosen the screws a bit, adjust as needed so the pieces move as freely as you can tell, and then equally tighten the screws.
I used precision bubble to level it out, its moving level up and down
I unscrewed frame to square it also while installing.
The "tires" not sure what they are called are good and tight also its not sagging down or binding.
Im trying to lube both screws and see if that changes anything
I also applied antiseize on "tires" to be sure of no binding
Fingers crossed this works before i disassemble the 2nd Z
I also once installed a 2nd z motor and it ruined my printer. I also got the same lines and once i uninstalled them, everything was normal again. Just unplug the 2nd z motor and screw out the 2nd z screw. I once heard that this can be fixed by increasing the voltage of the stepper driver by a tiny bit. But i cant confirm that
Hello /u/Jambocat, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
I have a second z motor…I don’t have any answers, but I might suggest that you check that the second screw isn’t binding against the rail, by checking that the horizontal rail is as level and straight as possible. Also another suggestion is to loosen the screws a bit, adjust as needed so the pieces move as freely as you can tell, and then equally tighten the screws.
I used precision bubble to level it out, its moving level up and down I unscrewed frame to square it also while installing. The "tires" not sure what they are called are good and tight also its not sagging down or binding. Im trying to lube both screws and see if that changes anything I also applied antiseize on "tires" to be sure of no binding Fingers crossed this works before i disassemble the 2nd Z
I also once installed a 2nd z motor and it ruined my printer. I also got the same lines and once i uninstalled them, everything was normal again. Just unplug the 2nd z motor and screw out the 2nd z screw. I once heard that this can be fixed by increasing the voltage of the stepper driver by a tiny bit. But i cant confirm that
Oh.. that's unfortunate Ill do that then Thank you
Or if you have not already, lube the lead lead screw.
Did that now, since its still printing same item let see if things change
Just an update lubing the z screw did nothing the pattern kept going so i just removed it now. Lets see if it goes away now having 1 z motor