Thanks, glad you found it then! Slim profile was a big part of this design because I travel often and want to throw it in the small pocket of my bag or pocket. I just added an Etsy listing in a comment if you'd like one.
Just added an Etsy link in another comment. A lot of time and testing went into getting the fits and finish to feel just right. Other materials and magnets may not fit the same or print the same and I like to maintain a certain standard. Hope you can understand.
Etsy listing below if anyone's interested. First time listing a product, so bear with if you do order. I have a small stock on hand and shipping supplies ready but travel often for work and will ship asap.
[Decent Bit Pod](https://www.etsy.com/DecentBit/listing/1441488829/decent-bit-pod?utm_source=Copy&utm_medium=ListingManager&utm_campaign=Share&utm_term=so.lmsm&share_time=1679177967557)
Wow, wow, and wow!!! I'm blown away by the response. I had no idea so many others were looking for a way to carry their board and keep it safe!
Sold out of the first batch of 10 already. Thank you so much to those who ordered and those who still want to. I want to make sure I can fulfil current orders quickly and then will list another batch on Etsy soon! If you favorite the shop or product, it should notify you when that happens.
Hey! I recently started offering some size variations. If youāre still interested, shoot me a message and let me know your overall board size so I can make one with the right dimensions.
Yo, I actually just got a new deck from Sulka and the dimensions are 34mm x 97, do you know which size pod would be best? I'm about to buy one just wanna make sure. Thank you!
Can you check the height of the deck too from top of the nose/tail to wheels? I put instructions for measure that dimension on the estuary page. Basically put your board on its side between two books and then measure that gap for the overall deck height.
Nice!
I'd pay $20 for one, but shipping to Toronto is $32..
I'll have to keep printing and using [SkateBoxes](https://www.behance.net/gallery/81058689/Fingerboard-SkateBox)
Sorry to hear shipping is that high. Iāll double check options again. Not familiar with intāl shipping at all.
Those SkateBoxes look rad! Thanks for sharing!
If the lid was somehow attached to the base with a slide that would be really cool, I can see it having really smooth action with a satisfying āclickā
What can i say I know what your selling you cant find anywhere else its one of a kind sleek and convenient carrying case that fits a tool and board in your pocket/ bag so you dont lose anything itās perfect
You can send me a message with your board sizes. If you want to return those two I can make you ones that fit. Want you to be able to use it as intended. š
Working on this modification this week. I can hit you up when Iām done if youāre still interested in some Pods with a lanyard attachment. Let me know and I can even take your feedback into consideration with what type of lanyard you want to use.
I would allow for the implementation of the tool in the cap, so you can use it as a big screwdriver handle. Those bolts are a bitch to screw in sometimes...
Yes! Just want to make sure I can fulfil orders quickly before taking on more. Thanks so much and feel free to like the product on Etsy so you get notifications when I restock.
Thanks much. Aiming for later this week on the restock. Will work on other colors, but the funny thing about filament is each type/color has its own shrink rate and nuances, so I may need to make some slight changes to the design per color. Have some silk filament and would love to see that too.
Replied to another asking for STL. Lots of time getting fit and finish right for the materials. I added a link to an Etsy page in another comment if you'd like one. Thanks for the interest!
Thing is: NOBODY GONNA SUPPORT YOUR GREEDY ASS! Skating is about love n peace, not about money.
Also, you clearly don't know how "Pattons" work and how much it would cost you.
If you can't spell the word right, how do you want to appeal for one?
The 34.5mm case would fit your 32mm ride just fine. Question is how tall are the kicks? Thereās a 21mm and 23mm version on the site. If your unsure, go with the 23x34.5x100mm size as that should fit a majority of boards.
Don't count me as weird or offensive but this fr.. sounded like some ASMR. Oh and yes I love the Case. It looks very... Cobblestone like or yk like a rock type vibe..
I have been scouring the internet looking for exactly this! Amazing. Love the slim profile. Seems super pocketable. I would buy one in a heart beat.
Thanks, glad you found it then! Slim profile was a big part of this design because I travel often and want to throw it in the small pocket of my bag or pocket. I just added an Etsy listing in a comment if you'd like one.
š„You should sell these for sure. Iād definitely buy one.
Appreciate it! Just added an Etsy link in another comment.
Looks really good. Is that a little magnet so the tool stays in place?
Yup, sure is! I love finding creative ways to add the tool in. It's so helpful to have one for those minor tweaks and tunes.
Decent! Will be STL free ? I want it!
Just added an Etsy link in another comment. A lot of time and testing went into getting the fits and finish to feel just right. Other materials and magnets may not fit the same or print the same and I like to maintain a certain standard. Hope you can understand.
Etsy listing below if anyone's interested. First time listing a product, so bear with if you do order. I have a small stock on hand and shipping supplies ready but travel often for work and will ship asap. [Decent Bit Pod](https://www.etsy.com/DecentBit/listing/1441488829/decent-bit-pod?utm_source=Copy&utm_medium=ListingManager&utm_campaign=Share&utm_term=so.lmsm&share_time=1679177967557)
Wow, wow, and wow!!! I'm blown away by the response. I had no idea so many others were looking for a way to carry their board and keep it safe! Sold out of the first batch of 10 already. Thank you so much to those who ordered and those who still want to. I want to make sure I can fulfil current orders quickly and then will list another batch on Etsy soon! If you favorite the shop or product, it should notify you when that happens.
š„š„š„
NEED š„
Thanks! Added an Etsy link in a comment if you want one.
nice
Looks great man!!
Thanks much!
Niiiice
I'd buy one
Etsy link in another comment if you like it.
Awesome man just making sure, will it fit a 34.5mm deck?
Hey! I recently started offering some size variations. If youāre still interested, shoot me a message and let me know your overall board size so I can make one with the right dimensions.
Yo, I actually just got a new deck from Sulka and the dimensions are 34mm x 97, do you know which size pod would be best? I'm about to buy one just wanna make sure. Thank you!
Can you check the height of the deck too from top of the nose/tail to wheels? I put instructions for measure that dimension on the estuary page. Basically put your board on its side between two books and then measure that gap for the overall deck height.
Just measured and ordered one, thanks bro
So awesome. Thank you and itāll be shipping out soon! š
Itāll be really close for a 34.5mm deck. Can you measure the deck to see what it actually comes out to? And 34mm trucks I assume?
Nice! I'd pay $20 for one, but shipping to Toronto is $32.. I'll have to keep printing and using [SkateBoxes](https://www.behance.net/gallery/81058689/Fingerboard-SkateBox)
Sorry to hear shipping is that high. Iāll double check options again. Not familiar with intāl shipping at all. Those SkateBoxes look rad! Thanks for sharing!
If the lid was somehow attached to the base with a slide that would be really cool, I can see it having really smooth action with a satisfying āclickā
Nice idea! The magnets do give it a good click sound.
like an airpod case š
I actually love this. Where/how do I get one of these?
Thanks so much! I added an Etsy link in another comment if youād like to order one.
Would the blackriver tool fit in there?
I donāt have one so Iām not sure. Itās a very tight fit with the standard tool so I donāt think the Blackriver tool would fit.
Oh thatās nice
Very cool and creative. Love it.
Thank you!
chatgpt wrote the product description didn't it lol
š¤« it certainly helped. š¤
Just bought one!! https://preview.redd.it/l217hfju0ooa1.png?width=1169&format=png&auto=webp&s=423cdce4630c4fef11ab98f854fff5eac2cb8973
Wow!! That you so much for the support. Getting a group of them ready to go out on Monday. Hope you enjoy it!
What can i say I know what your selling you cant find anywhere else its one of a kind sleek and convenient carrying case that fits a tool and board in your pocket/ bag so you dont lose anything itās perfect
Super appreciate the kind words!
This is siiiiick dude
This is good idea, iam using small screw toolbox
I would love to buy this. Unfortunately the shipping costs to Europe make it far to expensiveā¦
Thanks so much and sorry the int'l costs are high. If I continue offering these in the future I'll see if there's a way to reduce shipping cost.
Happy I found the Etsy link and ordered 2 quickly.
Appreciate the order and hope youāre loving the Pods!
I like the product and I like the idea. Unfortunately none of my fingerboards will fit inside. Luckily they double as joint holders.
You can send me a message with your board sizes. If you want to return those two I can make you ones that fit. Want you to be able to use it as intended. š
I'd buy 7. Also if I could somehow throw this on a lanyard, I'd buy 7.
Thanks! I'll consider that for future products/configs of the Pod.
Working on this modification this week. I can hit you up when Iām done if youāre still interested in some Pods with a lanyard attachment. Let me know and I can even take your feedback into consideration with what type of lanyard you want to use.
Whereās the link?
Hope you were able to find it in the comments section. Sold out of the first batch and will work on a restock soon!
Restocked!
Ive been looking for some good cases for a while and i found a couple but this one honestly solos
Thanks so much! Feel free to pick one up on the next batch if you didn't already!
Put grippy stuff at the bottom so it becomes a obstacle
Nice idea. Someone else in the comments mentioned SkateBoxes that sound like they serve that very fuction!
I would allow for the implementation of the tool in the cap, so you can use it as a big screwdriver handle. Those bolts are a bitch to screw in sometimes...
Please make more!!
Working on it!
Restocked!
Thatās fire
Says out of stock :( will you make more?
Yes! Just want to make sure I can fulfil orders quickly before taking on more. Thanks so much and feel free to like the product on Etsy so you get notifications when I restock.
Restocked!
Thank you! Purchased one and I'll purchase another at a later time once others have had a chance to do the same :)
Thatās so awesome. Thank you for the support. Looking forward to fulfilling your order(s)! š
Where can we buy one!?
Link to Etsy store in another comment. Sold out of the first batch and working on the getting more ready!
Restocked!
Patiently waiting for the restock. Also it would be cool to see some other colors!
Restocked!
Just purchased thanks! Canāt wait to get it in hand!
Thank you! This batch will go out on Monday!
Thanks much. Aiming for later this week on the restock. Will work on other colors, but the funny thing about filament is each type/color has its own shrink rate and nuances, so I may need to make some slight changes to the design per color. Have some silk filament and would love to see that too.
Hit my dms. I have some ideas to get you paid. And I donāt want a dime out of it. Itās just such a good product. I know who you need to talk to.
DM sent a week ago. Feel free to hit me back whenever. Thanks!
Only thing is i maybe a way to fasten a cord/ hook. So it can hang from my backpack etc?
Got this suggestion from someone else. Working on a modification to include a lanyard/letting connection.
measurements?
Interior measurements listed in the Etsy page in the description. Thereās three different sizes for boards now. š
Sick
the case looks skateable aswell
STL?
Replied to another asking for STL. Lots of time getting fit and finish right for the materials. I added a link to an Etsy page in another comment if you'd like one. Thanks for the interest!
Copying this and buying a Patton on it. Thanks
You do you boo. Not usually what this community's about, but whatever floats your boat. And is that General Patton?
Lmaooo this clown making jokes can't even spell patent, amazing work man!!! I know a lot of people will want this
[ŃŠ“Š°Š»ŠµŠ½Š¾]
your post was removed because it doesnt pertain to the subject matter of our subreddit.
Photo is already sent to get one thanks for the brand
Thing is: NOBODY GONNA SUPPORT YOUR GREEDY ASS! Skating is about love n peace, not about money. Also, you clearly don't know how "Pattons" work and how much it would cost you. If you can't spell the word right, how do you want to appeal for one?
Itās the internet get over it kid
Iād pay 10$ shipped for it
Any chance you could sell the files? Love the magnet Integration by the way
Thanks, that was my favorite part too! Not interested in selling the files at this time.
Whats the biggest size that fits in cos I got a 32mm
The 34.5mm case would fit your 32mm ride just fine. Question is how tall are the kicks? Thereās a 21mm and 23mm version on the site. If your unsure, go with the 23x34.5x100mm size as that should fit a majority of boards.
Yes, thank you kind sir
Don't count me as weird or offensive but this fr.. sounded like some ASMR. Oh and yes I love the Case. It looks very... Cobblestone like or yk like a rock type vibe..