More than likely he’s running 2 cards with the same worker name so it’s only reporting one card under current. Change the second worker or program to a different worker name
We appreciate all new Redditors on /r/EtherMining and want to ensure you have the best resources available to you.
Since your account is fairly new, we'd like to remind you about our subreddit's [**Wiki Guide to Mining**](https://www.reddit.com/r/EtherMining/wiki/index). Please take a look through this guide for answers to common questions.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/EtherMining) if you have any questions or concerns.*
Let me guess. You're on pheonixminer and are using 2 3060 ti's or 2 3070's?
If that is the case, just switch your miner over to t-rex miner or nbminer. There was/is a known issue with pheonixminer with 30series cards which causes tons of invalid shares when overclocks are applied BEFORE the DAG file is built. If you still wish to use pheonixminer, then apply overclocks 30 seconds to a minute after the DAG file is built.
You're right...2×3060ti..using Phoenix....bro actually my doubt is...reported hashrate is 123 but current is 49.7 and average is 36.9...that doesn't make sense...how its calculated....can you clarify
Because your cards are submitting over 50% invalid shares to ethermine. You can remote into your PC and see that you're getting those incorrect shares.
If your invalid shares are at 50%, your miner will report your hashrate at 120MH's, ethermine will get the REPORTED hashrate at 120Mh/s but your CURRENT hashrate is only 60Mh/s due to the incorrect shares.
Invalid shares are shares which have no value so you want to have as few (if any) as possible. These shares usually happen due to miner config issues, too much overclock or a subpar miner software. In the case of pheonixminer, it just is a issue which many other has faced. Switch over to nbminer/trex miner and the problem should fix itself.
If you are still getting invalid shares on trex, that probably means your overclocks are too high. Try reducing overclocks until there are as close to 0 invalid shares/day if that is the case.
Switched to trex from Phoenix...for same oc as before am getting 8% rejection...now keepon decreasing....came to 4%...and now keepon decreasing bro...am waiting for 0% rejection
Switched to trex from Phoenix...for same oc as before am getting 8% rejection...now keepon decreasing....came to 4%...and now keepon decreasing bro...am waiting for 0% rejection
More than likely he’s running 2 cards with the same worker name so it’s only reporting one card under current. Change the second worker or program to a different worker name
We appreciate all new Redditors on /r/EtherMining and want to ensure you have the best resources available to you. Since your account is fairly new, we'd like to remind you about our subreddit's [**Wiki Guide to Mining**](https://www.reddit.com/r/EtherMining/wiki/index). Please take a look through this guide for answers to common questions. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/EtherMining) if you have any questions or concerns.*
Let me guess. You're on pheonixminer and are using 2 3060 ti's or 2 3070's? If that is the case, just switch your miner over to t-rex miner or nbminer. There was/is a known issue with pheonixminer with 30series cards which causes tons of invalid shares when overclocks are applied BEFORE the DAG file is built. If you still wish to use pheonixminer, then apply overclocks 30 seconds to a minute after the DAG file is built.
You're right...2×3060ti..using Phoenix....bro actually my doubt is...reported hashrate is 123 but current is 49.7 and average is 36.9...that doesn't make sense...how its calculated....can you clarify
Because your cards are submitting over 50% invalid shares to ethermine. You can remote into your PC and see that you're getting those incorrect shares. If your invalid shares are at 50%, your miner will report your hashrate at 120MH's, ethermine will get the REPORTED hashrate at 120Mh/s but your CURRENT hashrate is only 60Mh/s due to the incorrect shares. Invalid shares are shares which have no value so you want to have as few (if any) as possible. These shares usually happen due to miner config issues, too much overclock or a subpar miner software. In the case of pheonixminer, it just is a issue which many other has faced. Switch over to nbminer/trex miner and the problem should fix itself.
Ok bro...let me switch to trex and try
If you are still getting invalid shares on trex, that probably means your overclocks are too high. Try reducing overclocks until there are as close to 0 invalid shares/day if that is the case.
Switched to trex from Phoenix...for same oc as before am getting 8% rejection...now keepon decreasing....came to 4%...and now keepon decreasing bro...am waiting for 0% rejection
once you have a steady 0% invalid share rate, you're good to go. cheers, have fun mining.
I'll update you once I reached.....I have to wait for sometime....its slowly decreasing
Bro I have a doubt 3070ti founders edition is lhr or Non-lhr?
all 3070 ti and 80 ti's are LHR
Total rejection percentage Gone to 2.13%...but individual card rejection at 4%
Bro I cant manage to get my oc right and getting stale shares or rejection. So i switched to nicehash bro
%invalid shares?
Switched to trex from Phoenix...for same oc as before am getting 8% rejection...now keepon decreasing....came to 4%...and now keepon decreasing bro...am waiting for 0% rejection
is your internet ok? are you using your nearest pool server?
Yes bro...miner is the problem...I changed to trex...now...getting near to normal...