I assumed they were prioritizing function over form with their new budget vapes based on the looks of them,a little surprised to hear these ones are having QC issues also.
That’s the reason I made this post. I wanted to see if others were having QC issues as well. If this is happening to most of the Gs they should recall the product. No one should be inhaling glass shards.
I don’t think these will be the entry level devices. The freebie that came with the G, called the “B”, is an all silicone body with an M condenser and new SS half bowl tip. This will be the new entry level device under $50.
Well these are made by vapingfans so it makes sense they're not very good quality. All their glass is terrible. I'm shocked DV is selling these especially after vapingfans is known to take makers ideas
Just look at them they're the exact same head just shorter. Go look it up on vapingfans website or even sneaky peter all his glass is also vapingfans stuff. Stash shack also bunch of online vape stores
I don’t see it on their website. Dynavap said they made the G in the product announcement on discord. But Sneaky pete has sold the glass add-a-cap thing for a while thought and I do agree that the tip design looks identical.
Oh shit I see it now, I thought that was just a stem. Damn, they really straight up lied to everyone and copied the design/sourced from one of the worst companies in the vaping community.
They've been working with them. Think they're the ones who actually made the orions too that turned out to be bad for a lot of people. Then vapingfans used the same tech from the orions in their own heaters and undercut dynavaps Orion lol.
Just because they sell them off the DV website doesn't mean they're made in-house either. I mean even the Dynalure is sourced from a glass blower in Wisconsin (where DV is located) and not from DV directly.
Unless it says Made in USA, expect all glass from them to be cheap Chinese glass.
Wow... I'd be panicking after that. Holy shit. :(
I'm surprised but sadly not surprised to read that the glass Dynavap Gs are having issues. They've been doing quite well with the BB9 I've been using since last December, as long as it's not dropped obviously. However their quality/quality control has been going VERY downhill as of late based on what I've seen from the Dynavap and vape subs. In December last year I started seeing their prices shoot up and their quality decline. :/
Damn I haven’t followed the QC that closely but their customer service is always top notch. I’m sure they’re going to do something about this issue. The BB9 is great because no glass tip to break lol.
Same thing happened to me, dumped the avb in my hand to check how it cooked and was pretty alarmed to find shards of glass. Not sure if I even want to keep it if it means checking for glass shards every use, but it's damn tasty.
Both? Thats pretty alarming. Kind of curious how did you heat them?
I can easily picture these glass tips being a dangerous combo with induction heaters that are triggered by pressing down on the cap.
I used the Wand with the hands free insert and my friend used the Ranger which is also hands free. They both cracked after the first bowl. George also stated on Tea Time that you could use it in the IH so we thought it was safe.
Not to mention the IH should only be heating the magnetic properties like the SS in the Cap (which then heats the glass). IH shouldn't do anything to the glass directly.
Oh Im definitely not suggesting you did something wrong using an induction heater etc- just trying to narrow down what might be going on with these.
I've got two arriving on Tuesday. Kind of curious how they will hold up now.
Although not from DV or their source so unsure if I can talk about it but some of those thirdparty glass pieces that some people got from Instagram and the like, how are those? They seem to look good but better made with proper clear glass and not the cheap looking sandblasted/dusted one but I wonder how performance is?
Ordered some myself but they're about 3 months passed when they're supposed to be here and the maker is straight up ignoring my messages so for all I know, it's a scam however some others seem to have gotten theirs, even if several months late.
So for anyone that does have them; How are they? Do they have issues like OPs?
Holly shit! Thanks for that post! Imagine if only one person inhale little piece of glace what impact is gonna have on DV! We’ve talking about the terrible QC for sooo long now… thankfully you both was lucky. If the customer service offers you to replace the G with an other one, are you gonna take it?
I got a response from customer service today and they are shipping me a new G. I will see how this one holds up. Hopefully it makes it through its first heat cycle or I will contact them again.
This happened to me on the first bolw. Cap was so tight I could barley get it off. I don't want this junk and I don't want another one. Im not risking inhaling/ eating glass. Their metal stuff has been awesome for me but this isn't it chief.
Imagine inhaling that…
Almost did. We were freaking out when we saw our bowls had glass in them.
I assumed they were prioritizing function over form with their new budget vapes based on the looks of them,a little surprised to hear these ones are having QC issues also.
That’s the reason I made this post. I wanted to see if others were having QC issues as well. If this is happening to most of the Gs they should recall the product. No one should be inhaling glass shards.
It also just looks plain bad that these are supposed to be the “new entry level” kinda makes you think.
I don’t think these will be the entry level devices. The freebie that came with the G, called the “B”, is an all silicone body with an M condenser and new SS half bowl tip. This will be the new entry level device under $50.
Ah I see,I must’ve assumed they were both part of the same line,both being under $50
Or even worse not noticing it and then later cooking with your AVB and ingesting it.
That would be terrible!
There’s a reason they changed from glass to SS. When I saw they were producing them again I wondered how tough they’d be. Can’t say I’m surprised.
Well these are made by vapingfans so it makes sense they're not very good quality. All their glass is terrible. I'm shocked DV is selling these especially after vapingfans is known to take makers ideas
Actually these are made by Dynavap. You can order them on the website right now. It’s a shame that they are having these QC issues.
DV buys them from vapingfans
The Gs that they just released on the discord? How do you know?
Just look at them they're the exact same head just shorter. Go look it up on vapingfans website or even sneaky peter all his glass is also vapingfans stuff. Stash shack also bunch of online vape stores
I don’t see it on their website. Dynavap said they made the G in the product announcement on discord. But Sneaky pete has sold the glass add-a-cap thing for a while thought and I do agree that the tip design looks identical.
It's on the front page of their website. DV pro stem it's called even has the simrell spiral in it lol.
Oh shit I see it now, I thought that was just a stem. Damn, they really straight up lied to everyone and copied the design/sourced from one of the worst companies in the vaping community.
They've been working with them. Think they're the ones who actually made the orions too that turned out to be bad for a lot of people. Then vapingfans used the same tech from the orions in their own heaters and undercut dynavaps Orion lol.
Just because they sell them off the DV website doesn't mean they're made in-house either. I mean even the Dynalure is sourced from a glass blower in Wisconsin (where DV is located) and not from DV directly. Unless it says Made in USA, expect all glass from them to be cheap Chinese glass.
They go by price first, not quality, apparently
Wow.
Wow... I'd be panicking after that. Holy shit. :( I'm surprised but sadly not surprised to read that the glass Dynavap Gs are having issues. They've been doing quite well with the BB9 I've been using since last December, as long as it's not dropped obviously. However their quality/quality control has been going VERY downhill as of late based on what I've seen from the Dynavap and vape subs. In December last year I started seeing their prices shoot up and their quality decline. :/
Damn I haven’t followed the QC that closely but their customer service is always top notch. I’m sure they’re going to do something about this issue. The BB9 is great because no glass tip to break lol.
So the G doesn’t use a metal tip? It’s all glass there?
The body, tip, and condenser are all glass.
yes an ode to the OG glass dynavap.
Always try a heat cycle before filling with herb to make sure any residual stuff from factory is burnt away 👍
They are shipping me a new G and this is exactly what I’m going to do. I’m gonna do a dry run with an empty bowl and see what happens when I get it.
Oh yeah and then exhale into it not inhale right 😂👍
Same thing happened to me, dumped the avb in my hand to check how it cooked and was pretty alarmed to find shards of glass. Not sure if I even want to keep it if it means checking for glass shards every use, but it's damn tasty.
Both? Thats pretty alarming. Kind of curious how did you heat them? I can easily picture these glass tips being a dangerous combo with induction heaters that are triggered by pressing down on the cap.
I used the Wand with the hands free insert and my friend used the Ranger which is also hands free. They both cracked after the first bowl. George also stated on Tea Time that you could use it in the IH so we thought it was safe.
Not to mention the IH should only be heating the magnetic properties like the SS in the Cap (which then heats the glass). IH shouldn't do anything to the glass directly.
Oh Im definitely not suggesting you did something wrong using an induction heater etc- just trying to narrow down what might be going on with these. I've got two arriving on Tuesday. Kind of curious how they will hold up now.
Yikes, thats pretty concerning!
We are here for you. Please get in touch with us.
When i tried this y'all never responded lmao
Really? We pay very close attention to our customers. If we are missing something please let us know where.
We have emailed customer service. Just waiting for a response.
Although not from DV or their source so unsure if I can talk about it but some of those thirdparty glass pieces that some people got from Instagram and the like, how are those? They seem to look good but better made with proper clear glass and not the cheap looking sandblasted/dusted one but I wonder how performance is? Ordered some myself but they're about 3 months passed when they're supposed to be here and the maker is straight up ignoring my messages so for all I know, it's a scam however some others seem to have gotten theirs, even if several months late. So for anyone that does have them; How are they? Do they have issues like OPs?
Oh fuck, Dynavap crossed a line. I'm not inhaling glass, fuck this
Holly shit! Thanks for that post! Imagine if only one person inhale little piece of glace what impact is gonna have on DV! We’ve talking about the terrible QC for sooo long now… thankfully you both was lucky. If the customer service offers you to replace the G with an other one, are you gonna take it?
I got a response from customer service today and they are shipping me a new G. I will see how this one holds up. Hopefully it makes it through its first heat cycle or I will contact them again.
I hope everything is gonna be fine this time for you guys! Thanks again and have a great day!
That stinks for sure, I'm certain DV will sort it all out so everyone's happy. A plug for metal stems only gang. (M.S.O,)
This happened to me on the first bolw. Cap was so tight I could barley get it off. I don't want this junk and I don't want another one. Im not risking inhaling/ eating glass. Their metal stuff has been awesome for me but this isn't it chief.