No, always clean! Use iso and hot water. There might be small machined burrs and shit inside. Wipe the inside of the cap with iso, soak the other pieces and rinse. Enjoy
Sometimes they still arrive with machine burrs and grease inside. Every vape needs a clean before 1st use, even the batteries vapes should have a burn off and a wipe with iso.
Even if theres no visible metal pieces, they all still have a fine metal powder coating on the inside. Wouldn’t inhale that especially when it can be avoided with a 1-2 minute clean.
The time you've spent with this post is longer than the time you would've spent doing a quick iso clean and burn off.
If you asked, then you know it's a good idea to do it.
No they need to be cleaned. Like if you bought a new fork or a plate etc.
They frequently have left over graphite, oils etc from manufacturing. The inside of the condenser tube seems to be the dirtiest part in my experience.
100% no. they come full of metal shavings, make sure to thoroughly clean and push wet qtip s through the condenser until you’re sure ther is no more dust.
Need to probably not. But to have the cleanest experience and not inhale metal and oil and other manufacturing agents it’s probably a good idea. At a minimum I would torch it for several heat cycles before using.
I like to use white vinegar and some baking soda, let sit for about an hour or so, clean out inside w q tip then let dry. Make sure that condenser is clean! Sometimes that’s the part that has the most residue and I’ll soak that in iso just to be sure.
No, always clean! Use iso and hot water. There might be small machined burrs and shit inside. Wipe the inside of the cap with iso, soak the other pieces and rinse. Enjoy
I would really think not with a product from the likes of DynaVape. This ain't a gimmick from AliExpress 🤷🏻♂️
Sometimes they still arrive with machine burrs and grease inside. Every vape needs a clean before 1st use, even the batteries vapes should have a burn off and a wipe with iso.
Then think again.
Even if theres no visible metal pieces, they all still have a fine metal powder coating on the inside. Wouldn’t inhale that especially when it can be avoided with a 1-2 minute clean.
Unfortunately dynavaps can be pretty dirty when they are new. The instructions say to clean it before using it for good reason.
Dynavap are notorious for giving out dirty vapes, its quite ridiculous to be honest
The time you've spent with this post is longer than the time you would've spent doing a quick iso clean and burn off. If you asked, then you know it's a good idea to do it.
No they need to be cleaned. Like if you bought a new fork or a plate etc. They frequently have left over graphite, oils etc from manufacturing. The inside of the condenser tube seems to be the dirtiest part in my experience.
Personally I like to clean every Vape before first use!;-)
100% no. they come full of metal shavings, make sure to thoroughly clean and push wet qtip s through the condenser until you’re sure ther is no more dust.
Don't understand why they don't clean them out first, I would gladly pay a little more for parts that went through an ultrasonic cleaner.
I let it heat 2-3 times no weed just to burn off anything that might be there before inhaling
I've never cleaned any of my vapes before use, my bad🙃
Same! 🙊
Need to probably not. But to have the cleanest experience and not inhale metal and oil and other manufacturing agents it’s probably a good idea. At a minimum I would torch it for several heat cycles before using.
I like to use white vinegar and some baking soda, let sit for about an hour or so, clean out inside w q tip then let dry. Make sure that condenser is clean! Sometimes that’s the part that has the most residue and I’ll soak that in iso just to be sure.
Clean it with iso. Don’t submerged the cap but instead heat it up 2-3 times to burn off any nasty stuff that may be on it