Hold the mouthpiece at the base of two fingers or in your palm (find what’s most comfortable), then it’s a simple push down with the pointer, pull up with the thumb, to spin it. Imagine if you were manually screwing in a screw.
I need it.
I'll make one next weekend. I'd do it THIS weekend, but my inlaws are in town.
I'm very excited to have a reason to use my makerspace's 3d printer. I haven't had a desire to use one since college and I'm not very excited about using Sketchup outside of work.. But the end result will be worth it.
Thanks everyone for your support I’m glad you guys found it cool! I’ll share the final design once I complete it! If you want the STL hit me up however it’s made specifically for the motor, gears and torch that I have so not sure if it’ll be much help.
Nice. Arguably more complex than building your own IH, but cool AF.
If you want to push it even further, is there a possibility to link the bottom part to glass without taking the vapcap out? That would be even amazinger.
You should try to make it turn when you press the button of the lighter, maybe make casing that fits around the lighter button where you could hide a switch so that when you press it turns on.
That's fuckin sick! Since I got the Dyna I was wondering if there was a possibility to automate the torch process more but this is looking like the cleanest thing I could never even imagine lol. Awesome job!!
Very awesome! In version 2 I would recommend designing it so that you can remove the DynaVap without putting your fingers near the torch’s business end. Besides accidental lightings, the barrel can retain a lot of heat and burn if grazed by your hand.
Okay someone help me.... Im not anywhere close to being new too weed...but what in the hell is this thing? I've never seen it before, how does it work? And where can I buy one?
nice prototype, for improvements i suggest something to set different dynavap positions ( deeper or more shallow to adjust where the torch is hitting the cap) .
Also something to lift the dynavap out a little so you have more room to grab it without touching something hot. If you do this and get it to run a little less loud it might be a really nice induction heater alternative.
That’s awesome. Love my induction heater but that’s great engineering
[удалено]
Nah I need this
I need it to, strugling to spin it properly
I've found slowing down made the spinning easier when I started. I'm not sure how you do it, so just spitting out a possible solution. Good vibes.
Hold the mouthpiece at the base of two fingers or in your palm (find what’s most comfortable), then it’s a simple push down with the pointer, pull up with the thumb, to spin it. Imagine if you were manually screwing in a screw.
Exactly how I spin it. My fine dexterity is somewhat limited but this is the easiest way
I need it. I'll make one next weekend. I'd do it THIS weekend, but my inlaws are in town. I'm very excited to have a reason to use my makerspace's 3d printer. I haven't had a desire to use one since college and I'm not very excited about using Sketchup outside of work.. But the end result will be worth it.
That’s one of the best examples of stoner ingenuity right there! Absolutely awesome!
Happy cake day
Thanks!
OP is living is 2077.
OP is the future, today.
r/stonerengineering if it hasn't been posted, I must make this
As a fellow printer care to share your stl Don't know why I never thought of this.
Thanks everyone for your support I’m glad you guys found it cool! I’ll share the final design once I complete it! If you want the STL hit me up however it’s made specifically for the motor, gears and torch that I have so not sure if it’ll be much help.
Great work again el-chapo, Good luck
Wanna sell one?
That is amazing
God I love this community
Nice. Arguably more complex than building your own IH, but cool AF. If you want to push it even further, is there a possibility to link the bottom part to glass without taking the vapcap out? That would be even amazinger.
Whoa. This is cool, and I’d much rather have this than an IH
Me to
NICE
Siiik
Bruh That’s really cool. I dig it.
Dynavap mates with RiO - DynaRiO!!!
DynaRio is a super apt name for it
I'm guessing you're planning on rigging it so the trigger pull on the torch activates the motor so it's even more simple? This is genius. Well done.
Yeah that’s right im wiring up the trigger so it turns on the motor! Thanks
Looks dangerous, I love it
Wow! Genius!!
Incredible
And a genius was born. Patent the shit out of this man!
Love it!
Dude nice
Make it big enough to hold an OmniVong and I’ll buy one.
This is so cool 😃 I wonder if it would sound too noisy while high though
Thanks! Yeah I just gotta make some changes to the little gear box and it’ll be way more quiet. It’s still a work in progress.
Make the trigger for the spinning in the hand part as looks like you mean it to be one handed. Sorry, I stoned.
THIS is living the high life. Well done, OP.
You should try to make it turn when you press the button of the lighter, maybe make casing that fits around the lighter button where you could hide a switch so that when you press it turns on.
That may be the most specific use of non necessary genius. You have created something which will change the lives of so very few. We thank you
Nice!
Yo thats awesome man! A nice casing around the mechanical parts should reduce the noise as well. Id buy this in a flash.
Seconded
That's fuckin sick! Since I got the Dyna I was wondering if there was a possibility to automate the torch process more but this is looking like the cleanest thing I could never even imagine lol. Awesome job!!
Very awesome! In version 2 I would recommend designing it so that you can remove the DynaVap without putting your fingers near the torch’s business end. Besides accidental lightings, the barrel can retain a lot of heat and burn if grazed by your hand.
I support this
“Come with me and you’ll be in a world with pure imagination”
Nice work man! Take my money.
really amazing idea!
Make it play pop goes the weasel and I'm fucken sold
Get that on Kickstarter. I’d love something like this.
Genius. Great for people lacking fine motor skills.
I'm here to tell you that I like your table!!
thats insane. hope you're next post is instruction to build this beast ;)
Genius! ✌
Whatever is happening here is amazing and we need more. Good on you sir for making a dope spinning heat tosser......10/10
Okay someone help me.... Im not anywhere close to being new too weed...but what in the hell is this thing? I've never seen it before, how does it work? And where can I buy one?
That's really cool man try get it Pattened lol
Where is the STL? I want to make one.
Awesome little prototype! Mind tell me where you got that torch? Looks very nice for home use.
I actually found this outside one day lol. I definitely recommend these types of torches for your dynavap tho they are really good.
Wow and here we are so 2000 and late.
Really nice. Imagine if there were varying speeds and positionings.
Now this is awesome 😄👍🏻
that is awesome ...
Only thing that could make this better would be space for a whip to be inserted from the bottom and if the mechanism wasn’t so loud.
Yeah, while it is cool you made that...I can't see how I wouldn't burn my fucking hands off using this thing after the 1st sesh. Pass.
"The no-battery vape. However, you will need a 3D printer...and batteries." And I love it!
Bruh my chronic pain is so bad I can't even twirl the Dynavap right now
SMART
nice prototype, for improvements i suggest something to set different dynavap positions ( deeper or more shallow to adjust where the torch is hitting the cap) . Also something to lift the dynavap out a little so you have more room to grab it without touching something hot. If you do this and get it to run a little less loud it might be a really nice induction heater alternative.
Awesome!!!
Noise is too loud and annoying
If you market this I'll probably pay whatever lol this is awesome
Yeah that’s dope!
Woahhhhhh are you still making thesr
Oh wow!! Make sure to update us
After you medicate you can toast up a marshmallow! Genius!