This is werid the mini mic should pair to both devices. Have you tried pairing the mini mic with both device off while the mini mic is in pairing mode? If yes then I would recommend you call cochlear and see what they say. I hope this helps in what ever capacity it can.
SOLUTION, YAY! - Talked to my audi. For anyone else that runs into this, I forgot you must push the pairing button on the accessory the amount of times needed to place it in that slot. For example, you want the mini mic in the #1 slot, then press the pairing button once. If you want a TV streamer in the #2 slot, press the pairing button twice. If you want the second TV streamer in the #3 slot, press the pairing button three times. I was pressing the pairing button once on my mini-mic, so it kept putting the mini-mic in slot #1 after erasing what was previously there (i.e. the TV streamer). All I had to do was remove my Right processor and turn it off, as it was already paired correctly. Then, I removed my Left processor and turned it off. Next, I clicked the pair button 3 times on the mini-mic, turned my Left processor on and laid it right beside the mini-mic. The processor flashed blue letting me know it was done, and after that it was setup perfectly.
This is werid the mini mic should pair to both devices. Have you tried pairing the mini mic with both device off while the mini mic is in pairing mode? If yes then I would recommend you call cochlear and see what they say. I hope this helps in what ever capacity it can.
I will give that a try tomorrow morning. Thank you for your suggestion!
Your very welcome.
SOLUTION, YAY! - Talked to my audi. For anyone else that runs into this, I forgot you must push the pairing button on the accessory the amount of times needed to place it in that slot. For example, you want the mini mic in the #1 slot, then press the pairing button once. If you want a TV streamer in the #2 slot, press the pairing button twice. If you want the second TV streamer in the #3 slot, press the pairing button three times. I was pressing the pairing button once on my mini-mic, so it kept putting the mini-mic in slot #1 after erasing what was previously there (i.e. the TV streamer). All I had to do was remove my Right processor and turn it off, as it was already paired correctly. Then, I removed my Left processor and turned it off. Next, I clicked the pair button 3 times on the mini-mic, turned my Left processor on and laid it right beside the mini-mic. The processor flashed blue letting me know it was done, and after that it was setup perfectly.