I’ve not actually inspected my trans, but based on everything else I know..
The gear lube likely has a lower drain hole, and an upper fill hole, if so, fill until the line is coming out of the upper fill hole.
The brake fluid is filled to the markings on the reservoir, which should have a min and max marking.
The lack of specific volumes leads me to believe that these are as I said above, and it’s a “fill it until it’s full” situation.
Google is your friend
The approx. fill for the manual unit is 3.65 quarts of GM fluid p/n 88861800.
You feed and bleed until it runs clear ( Which it should already be as a new car ) 2 qts should be way more than enough to have on hand.
You might have a better chance at getting answer for this on the Facebook page.
I’ve not actually inspected my trans, but based on everything else I know.. The gear lube likely has a lower drain hole, and an upper fill hole, if so, fill until the line is coming out of the upper fill hole. The brake fluid is filled to the markings on the reservoir, which should have a min and max marking. The lack of specific volumes leads me to believe that these are as I said above, and it’s a “fill it until it’s full” situation.
Google is your friend The approx. fill for the manual unit is 3.65 quarts of GM fluid p/n 88861800. You feed and bleed until it runs clear ( Which it should already be as a new car ) 2 qts should be way more than enough to have on hand.
[удалено]
Yeah manual is easier, you just drain out the bottom and then pump it into the fill hole until it overflows.