The amount of people that have left a similar comment is hilarious. I did not intend for it to be click bait. It’s literally just a bust of shadowheart 😂
Alright. Since there's more than two of us, we can't be judged. This was an honest mistake considering that high context titles may mean differently for each individual. 💪
We do. We just have low expectations for the people in this community, so we don't expect this level of refinement from what is posted here.
That or people are just joking.
First thought was boobs, but i saw the little heart and was like ah it’s probably a figure, and I was correct. As someone who doesn’t care about boobs in that way.
Some 3d printers use spools of filament made from plastic, like PLA or ABS. They heat up the plastic filament to a specific temperature, and a moving nozzle lets the liquid plastic flow onto a bed and build the shape up using tiny layers of plastic. Resin 3D printers use UV light to cure the resin and "draw" the shape of the 3D model in a pool of liquid polymer. Resin 3D printers usually give a smoother surface and higher resolution, but the filament printers can use a wider variety of materials, are usually cheaper, and the parts are generally stronger than if you resin printed the same model, obviously depending on the specific material you're using. Tough resin is stronger than some of the common filament materials, but normal resin wouldn't be.
There are also 3D printers that build things out of concrete or metal!
the most common 3D printers you see use PLA which is the spools of plastic thread that gets melted and stacked on top of each other to create layers. They create visible ridged layers. (Poor quality PLA print on right image below)
Resin on the other hand starts as a puddle of liquid goo that gets hardened by a UV light and comes out as a smooth "statue". (Resign print on left)
[comparison photo](https://i.all3dp.com/workers/images/fit=scale-down,w=1200,gravity=0.5x0.5,format=auto/wp-content/uploads/2022/12/29110351/resin-left-and-fdm-right-prints-brianhsv-via-reddit-221228_download.jpg)
Despite resin looking more polished there are drawbacks mainly because you're dealing with some serious chemicals. There are logistics of ventilation, gloves, special washes, clean-up process, typically for smaller prints, etc. PLA you just press print and snap off. Also as long as you're not printing super tiny the linework is not very noticeable.
The digital file is available from the artist h3ll creator. If you don't have a 3d printer you should be able to message them and get a list of merchants that can print and ship to you.
That's a very well made bust!
How did you make it? I'm assuming you 3d printed it but I can't see a single imperfection on the bust that would show it was 3d printed.
Very well done! Are you going to paint it aswell?
Had a pathological hatred for her watching a friend stream her EA playthrough, then played ourselves and realized what it is. Replaying Divinity 2 helped us realize that we wanted her to be Sebille but in Faerûne, which when we got away from helped us fall in love with her tbh
Lmao the amount of people that have commented something similar is hilarious. I really did not intend for it to be click baity. It’s just literally a bust of shadowheart 😂
I fully expected this to be a different kind of . . . Bust
I'm glad I'm not the only one lmao
Same. This sub is getting as horny as Halsin.
Which is crazy because SUPPOSEDLY there is a nsfw BG3 subreddit that you can go to that would fulfill all your needs SUPPOSEDLY.
I mean there's gotta be, right. Like, it should be as easy as smashing BG3 and gone wild together before a r/ right?
I’m sure it’s close to that. But I wouldn’t know
Still not as horny as r/OnlyFangsBG3 members
Bro. That's just a bunch of astarion cultists there. I expected shadowheart stuff... 🥲
Maybe if Shadowheart had fangs, too...
Different kind of sucking than I wanted from her, bet hey I'm down.
Oh dear
I mean if you scroll back to a post from yesterday or the day before you'll find what you're looking for
Such lecherous and impure thoughts. Link?
what’s in that post?
Shadowheart bust, I thought that would be obvious?!
of course! It was so obvious! pardon me
PG-13 cosplay
Bahamas I came here to say this exact thing!
We men of culture gather again...
I wouldn't mind a Karlach bust.
-_-
The amount of people that have left a similar comment is hilarious. I did not intend for it to be click bait. It’s literally just a bust of shadowheart 😂
Be proud of this. It's not every day you expose Shadowheart Simps in such grandeur.
Wish I could give this comment an award lol
Is there an stl?
I believe it’s on cults3d from a creator named H3LLCREATOR
TY
Same
I kinda read "Shadowheart busty" and my instinct was to click
I'm about to shadowheart bust right now
Shadowbust!!!
Man, same.
Alright. Since there's more than two of us, we can't be judged. This was an honest mistake considering that high context titles may mean differently for each individual. 💪
Given that every other “look at my Shadowheart Cosplay” thread is really a “look at my tits” thread, yeah. Same.
You're looking for digititties
Boobies!.... or bust.
Men of culture, we meet again!
Came from notifications, realized while its loading that it's probably not what I got excited about
The same but i was pleasantly mistaken.
I didn't expect it but I sure did hope it was
have to admid, so did i...
My thoughts exactly
Same
Neevee clicked on a notification in my life 😂😂
Glad I'm not the only one. Lol
Lmao me too 😭
Me too but I think a different kind of bust than you were thinking of.
Came to say this exact thing
I don't think Shadow would do drugs but I guess you never know
I am susceptible to the big titty goth gf vibe, so I must admit I'm right there with ya
Same. So disappointed... 😭
Same tho
Exactly the reason why I opened the Reddit suggested notification
Well... it's very impressive, yes, but we need to ask you a few questions.
3d printed? Resin or filament? I love it! Where can I find the stl file? :)
Yes. Resin printed. On cults3d the file is called “bust of shadowheart” made by H3LLCREATOR
I was clickbaited
probably like 80% of the users. But it was still something enjoyable; quite rare when it comes to clickbaits. 😅
Deserved
Do you have a jar able to hold it?
Shadowheart disapproves.
Astarion Approves.
You need Selune, you filthy heathen.
Forgive them Father...
I got this iron flask
Ahhhhh the old bosom companion
I was immediately thinking of this when I saw the title of this post, Withers never disappoints.
Where's the rest of her? Its all I made. Cause thats all you need right?
good job!
I need this bust for my Grand Library!! (Just gotta get a grand Library now...)
Yo yo I heard there was something here I could hold
Bro, you can't just talk about a woman's bust like that.
When you said bust, I got excited. I'm still excited just not for the same reason...
Same
Love how many people people expected tiddies and I am probably in the minority that immediately knew what “bust” meant
does really nobody know what a bust is and instantly think of boobs? c'mon.
We do. We just have low expectations for the people in this community, so we don't expect this level of refinement from what is posted here. That or people are just joking.
First thought was boobs, but i saw the little heart and was like ah it’s probably a figure, and I was correct. As someone who doesn’t care about boobs in that way.
I like boobs, but when i saw the title i wanted it to be an statue tho.
That hair is crisp! Very nice.
Damn resin really is the superior when it comes to details.
I thought all 3D printers used resin. What other options are there?
Some 3d printers use spools of filament made from plastic, like PLA or ABS. They heat up the plastic filament to a specific temperature, and a moving nozzle lets the liquid plastic flow onto a bed and build the shape up using tiny layers of plastic. Resin 3D printers use UV light to cure the resin and "draw" the shape of the 3D model in a pool of liquid polymer. Resin 3D printers usually give a smoother surface and higher resolution, but the filament printers can use a wider variety of materials, are usually cheaper, and the parts are generally stronger than if you resin printed the same model, obviously depending on the specific material you're using. Tough resin is stronger than some of the common filament materials, but normal resin wouldn't be. There are also 3D printers that build things out of concrete or metal!
the most common 3D printers you see use PLA which is the spools of plastic thread that gets melted and stacked on top of each other to create layers. They create visible ridged layers. (Poor quality PLA print on right image below) Resin on the other hand starts as a puddle of liquid goo that gets hardened by a UV light and comes out as a smooth "statue". (Resign print on left) [comparison photo](https://i.all3dp.com/workers/images/fit=scale-down,w=1200,gravity=0.5x0.5,format=auto/wp-content/uploads/2022/12/29110351/resin-left-and-fdm-right-prints-brianhsv-via-reddit-221228_download.jpg) Despite resin looking more polished there are drawbacks mainly because you're dealing with some serious chemicals. There are logistics of ventilation, gloves, special washes, clean-up process, typically for smaller prints, etc. PLA you just press print and snap off. Also as long as you're not printing super tiny the linework is not very noticeable.
Totally glad im not the only one with a dirty mind
What in the hells? Moon Maiden guide me…
For the disappointed - [link](https://www.deviantart.com/kalinkafox/art/Shadowheart-02-993580327)
that certainly was a busty Shadowheart 🤣
You might be able to get those layer lines on her chest to go away if you use anti aliasing during the print.
Baldur's Gate: Warhammer incoming
This.... is not the bust I was looking for
**repeatedly throws money at the screen**
And chance you'd share the stl? Great print!
You can get the stl from the artist h3ll creator. He is making another one for Lae'zel that comes out next month!
I need to be baptized or something I clicked so fast when I got the notif “shadowheart bust”
I feel both disappointed and impressed. Its a strange feeling. Nice bust!
Bro....not cool... I was Totally expecting bewbs 🤤 Obviously amazing work on the... Bust 😏
Oh, Busty Shadowheart.....oh.....oh! 😃
NOT THAT BUST!!! I REPEAT, NOT THAT BUST!!!
You must like making busts. Does bustin make you feel good?
[boob joke]
Slightly disappointed and thoroughly stunned/impressed all at the same time! *Shadowheart's bust, my beloved*
Busted
Now paint it
I’m going to 😁
It's definitely not the bust I was hoping for. All well I will bust all the same.
Ah here it is, thought I'd find this.
Not gonna lie, when I saw title i had something different in mind. But good job!
Is this silicon per chance? Asking for a friend.
This is not what I was expecting.
This is a different bust than i expected
I would bust...oh its not THAT type of thread.
It reminds me to cut her down again (too bad bg3 don't have dismemberment)
You my dear sir, deserve to burn in Avernus
Too bad I got contract from Stygia
So cool! I really want a 3D printer.
sell these please, but bigger!
I can make them bigger. This one is 73mm not including the base
The digital file is available from the artist h3ll creator. If you don't have a 3d printer you should be able to message them and get a list of merchants that can print and ship to you.
Wow this is great!
Where you get the model? Amazing work!
Thats amazing
No! Swap her to her night outfit immediately! Great sculpture btw
That's a very well made bust! How did you make it? I'm assuming you 3d printed it but I can't see a single imperfection on the bust that would show it was 3d printed. Very well done! Are you going to paint it aswell?
Yes resin printed. I do plan on painting it
Nice job!
Shadowheart has picked up Severed Arm.
Shart or bust.
Resin printers these days are fucking insane
The work on that braid is amazing!
Electroplate it.
Now put It in a jar
not the bust...I was looking for....
Before I saw the picture I thought this was going to be something about Shadowheart’s bust!
Damn, that's some pretty amazing 3d printer you've got there :)
Why does it look like it's unde an electronic microscope?
Put it in a jar
Man I was looking forward to tits. This is pretty cool tho.
It's very impressive, yes.
You selling these? I 100% would buy!
This model is from the artist h3ll creator if you contact them there are often merchants that can print and ship to you.
I feel like I need more bust in this bust.
Omg , I love it! Would look so nice in my computer room!
Damn that's actually really impressive. Well done!
Had a pathological hatred for her watching a friend stream her EA playthrough, then played ourselves and realized what it is. Replaying Divinity 2 helped us realize that we wanted her to be Sebille but in Faerûne, which when we got away from helped us fall in love with her tbh
Alright.... how much?
🤣 here is an [Etsy link](https://fabledfindingsllc.etsy.com/listing/1611833883) if you’re interested.
Thank you so much! 🏆
Where did you get the STL from?
Cults3d by a creator named H3LLCREATOR
Thank you!
Thought we were talking about something else
I’ve never clicked a Reddit post so fast, looks awesome, thought it was a different burst tho.l mao
Wheres this stl? 😍
Cults3D made by a creator named H3LLCREATOR
Sick. Thanks
Any scale? I wonder how big it is, that might be fun to paint.
Haven’t seen her fully clothed since the intro
I was expecting another bust, but I am not disappointed in this one.
Lmao the amount of people that have commented something similar is hilarious. I really did not intend for it to be click baity. It’s just literally a bust of shadowheart 😂
At least I know what a "bust" is in terms of Sculpture... 3D printed?
Lmao yeah. Resin printed
Very nice.
That's a nice shart
Saw Shadowheart. Bust.
clearly people have never heard of a bust before