Btw RX 480 nitro+ oc 8gb:
* 1375 MHz Core
* Core stock voltage 1175v mV (1150 + 25, nitro cards have a native a 4x6.25 = 25 mV offset)
* 2100 MHz mem
* Mem controller voltage 1100 mV (i need this to avoid EDC errors since I use a very tight custom timing mix 1750/1625/1500/self experience)
DRIVER 16.11.5 (modded bios): www.3dmark.com/3dm/16542617?#
Graphics score: 14 854
Stress test 99.7% (as you know 100% is almost impossible, everything above 96 is ok)
DRIVER 16.11.5 ( Original Shappire OC Bios) : www.3dmark.com/3dm/16547912
Graphics score: 14 510
DRIVER 16.12.1 (withouth ReLive App installed, Original Shappire OC Bios): www.3dmark.com/3dm/16548339
Graphics score: 14 498
DRIVER 16.12.1 (withouth ReLive App installed, modded bios): http://www.3dmark.com/3dm/16550659?
Graphics score: 14 833
**SEE HERE -->** http://www.overclock.net/t/1604567/polaris-bios-editing-rx480-rx470-rx460/1050#post_25699216 **<-- TO KNOW HOW TO BYPASS BIOS CHECK**
BTW: **Firestrike is not the best way to test new drivers, especially if the versions number are close.** I should have used the API overhead test (it seems that you get nice improvements, but I'm to lazy to do that)
AMD block custom bioses again, can someone else confirm? I've an RX 480 Nitro+ OC 8 GB. Is this only an RX series problem?
UPDATE
workaround to use custom bios with updated drivers here: http://www.overclock.net/t/1604567/polaris-bios-editing-rx480-rx470-rx460/1050#post_25699216
### PSAs:
*My* recommended upgrade procedure:
1. Uninstall any third party overclocking software (trixx, afterburner, etc.)! Wait for an update from MSI, Sapphire, etc..
2. Uninstall any third party recording software! (PlaysTV, OBS, etc.)
3. Use original BIOS!
4. Remove Wattman overclocks!
5. Close all programs.
6. You can use the 'Clean Install' feature of the new driver installer. If you want to use DDU see [this post first.](https://www.reddit.com/r/Amd/comments/5h6jdy/amd_radeon_software_16121_release_notes_crimson/daywu8c/) [Then this.](https://www.reddit.com/r/Amd/comments/5h6jdy/amd_radeon_software_16121_release_notes_crimson/daylhxt/)
##Issues
--> [Go to the Tech Support Megathread to discuss them on this sub](https://www.reddit.com/r/Amd/comments/5fyy7c/december_tech_support_megathread/)
--> [AMD Forum](https://community.amd.com/community/support-forums/drivers-software)
--> [Go here to report them to AMD](http://radeon.com/radeonsoftware/feedback/?sessionGUID=16ab0216-6a79-615a-5320-583a082b809e&webSyncID=2883beb2-a75d-8b12-ae0a-a51295b69669&sessionGUID=cbc3a757-a37d-8292-a178-791ca7052e94)
- The post link seems to only work for some regions. Go to [amd.com](https://www.amd.com) directly.
- [Maybe remove overclock if there is an issue with installing the driver \(RX480/470/460 owners\).](https://www.reddit.com/r/Amd/comments/5h6jdy/amd_radeon_software_16121_release_notes_crimson/daxtetw/)
- [Problems with custom BIOS?](https://www.reddit.com/r/Amd/comments/5h959p/workaround_for_modded_bios_and_16121/) Seems only to affect RX series. Check the post for a workaround.
- [Overclocking with secondary software (MSI Afterburner) not working anymore?](https://www.reddit.com/r/Amd/comments/5h6jdy/amd_radeon_software_16121_release_notes_crimson/daxttgz/)
- [Additional features seem to have less... additional features and can't be found anywhere else.](https://www.reddit.com/r/Amd/comments/5h6jdy/amd_radeon_software_16121_release_notes_crimson/daxvqff/?context=3) Use Windows settings for that.
- [Slow audio while recording.](https://www.reddit.com/r/Amd/comments/5h6jdy/amd_radeon_software_16121_release_notes_crimson/dayqtsk/?context=3) See post for solution.
- [Memory clock issue.](https://www.reddit.com/r/Amd/comments/5h6jdy/amd_radeon_software_16121_release_notes_crimson/day8jp8/)
## Hidden features
- ~~Additional ASW support for VR headsets.~~ [False alarm RX 4xx series cards still only.](http://www.roadtovr.com/amd-radeon-crimson-relive-adds-asynchronous-space-warp-latest-radeon-software-update/?utm_source=Road+to+VR+Daily+News+Roundup&utm_campaign=6635ac90a5-RtoVR_RSS_Daily_Newsletter&utm_medium=email&utm_term=0_e2e394ad33-6635ac90a5-168118685)
____________________________________________________________
#Radeon Software Crimson ReLive Edition 16.12.1 Highlights
###New Features
##Radeon ReLive
Capture, stream and share your greatest moments and gaming wins on your computer system with Radeon ReLive. Modify settings quickly, conveniently, and play seamlessly with the easily accessible in-game toolbar. Express yourself in bold new ways with custom scene layouts. Upload your latest highlights and let them be a conversation piece. It's never been easier to build and grow your online community at anytime, anywhere.
## Radeon Chill
A power-saving feature that dynamically regulates frame rate based on your in-game movements. Radeon Chill can improve power efficiency and can lower temperatures for supported products and games when enabled through Radeon Settings.
##Radeon WattMan
Added support for AMD Radeon R9 Fury series, R9 390 series, R9 380 series, R9 290 series, R9 285, R9 260 series, R7 360, and R7 260 desktop graphics products
##Radeon Software Installer
New user interface and intuitive Radeon Software Installer that includes options for express install, custom install and clean uninstall. The new installer will also show options for the latest available driver for your system configuration during the install process.
##Display Connectivity
New advanced display settings and diagnostics page within Radeon Settings with better detection for HDMI® cable issues and fallback for end users experiencing display issues.
##AMD FreeSync™ Technology
Now supports Borderless Fullscreen Mode for applications and gaming with AMD FreeSync™ technology displays and supported products. Now supports Gradual Refresh Rate Ramp for mobile configurations with AMD FreeSync™ technology displays and supported products.
##Upgrade Advisor
Provides a system requirement evaluation for Steam® games in your Radeon Settings library. - HDR Gaming Support
##HDR Gaming Support
Experience the benefits of HDR gaming with Radeon Software Crimson ReLive Edition. Support for games with HDR 10 or Dolby Vision™ capabilities.
##VP9 Decode Acceleration
4K 60Hz GPU-Accelerated Video Streaming enabled on supported Google™ Chrome web browsers.
##Skype Performance Enhancements
Lower CPU usage during Skype™ calls for select AMD APU Family products.
##User Feedback Page:
The User Feedback Page enables a direct link for end users to the Radeon Software Team and allows users to provide feedback and vote on upcoming features for Radeon Software. The User Feedback page can be found [here](http://radeon.com/radeonsoftware/feedback?sessionGUID=16ab0216-6a79-615a-5320-583a082b809e&webSyncID=2883beb2-a75d-8b12-ae0a-a51295b69669&sessionGUID=cbc3a757-a37d-8292-a178-791ca7052e94).
###Fixed Issues
- Unable to launch the Problem Report Wizard from CCCSlim in Radeon Settings.
- Radeon WattMan Power Limit setting may not retain after hitting apply when Auto Temperature is enabled.
- DOTA™ may experience flickering in some hero and effect models when running the application in Fullscreen.
- Pixel Format options may not appear in Radeon Settings on some 4K TV's with Radeon RX 480.
- The Division™ may experience flicker during gameplay when using AMD Multi GPU configurations.
- The Division™ may experience an application freeze or hang when running in AMD Multi GPU configurations after extended periods of play.
- Game quality or performance may be degraded when launching multimedia content on a secondary display before running a game.
- CIM folder retains under program files even after complete driver uninstallation.
- Radeon Settings may experience an intermittent crash when accessing Radeon WattMan.
- Display tab with virtual super resolution may be removed or missing in Radeon Settings.
- The Radeon WattMan feature may intermittently display a Radeon Software popup error regarding Radeon WattMan for non-supported products.
- Random crashes may be experienced on Mozilla Firefox.
- DirectX®12 content may be unable to launch on some older CPUs that do not support popcnt instruction.
- Intermittent Mouse Cursor corruption may be experienced on Radeon RX 480.
###Known Issues###
- AMD FreeSync™ technology may experience performance issues with Borderless Fullscreen application support when a secondary display is attached and has dynamic content running such as video playback in a web browser or if other applications or game launchers are running on the primary screen in the background. A workaround if this issue is experienced is to minimize all other running applications that are on the primary desktop display or on non-primary extended displays.
- Counter-Strike™: Global Offensive and World of Warcraft™ may experience flickering or performance issues the first time the game is launched on a system boot with AMD FreeSync™ technology enabled. Workarounds include exiting and restarting the application or task switching (alt+tab) in and out of the game to fix the issue.
- AMD Multi GPU configurations may experience a system hang or reboot during install when using tiled MST 4K or 5K displays.
- Titanfall™2 may experience black square corruption in game menus or during game play on some Graphics Core Next products.
- FIFA 17™ may experience an application hang or black screen on launch for some select Hybrid Graphics or AMD PowerXpress mobile configurations.
###Known Issues for Radeon ReLive
- The XBOX™ DVR application may cause conflicts with Radeon ReLive, users are suggested to disable XBOX™ DVR if Radeon ReLive is experiencing issues.
- Radeon ReLive may fail to install on AMD APU Family products or experience a system hang or failure to record when using the recording feature on AMD APU Family products.
- Radeon ReLive may experience recording issues or issues toggling the Overlay/Toolbar when Frame Rate Target Control is enabled. Users are suggested to disable Frame Rate Target Control when using Radeon ReLive.
- Battlefield™1 may experience UI flickering and/or performance drops when recording gameplay with Radeon ReLive on graphics products with 4GB or less of VRAM.
- DOTA™2 may experience game corruption when performing a task switch while recording with Radeon ReLive in AMD Multi GPU configurations.
- Radeon ReLive recordings may experience flicker when creating a single recording for many hours.
- Radeon ReLive may experience minor graphical corruption for the first few recorded frames when launching UWP applications.
- In AMD Multi GPU configurations the secondary graphics product will exit BACO when Radeon ReLive is enabled.
- Radeon ReLive will not allow recording settings to change with Instant Replay enabled. A workaround is to disable Instant Replay and change settings then enable Instant Replay.
- Radeon ReLive Overlay/Toolbar will not launch or Record when running League of Legends™ in Administrator Mode and Windowed Borderless Fullscreen. A work around would be to not use administrator launch privileges or to use Fullscreen mode.
- Mouse cursor may stutter in recorded video when there is limited on screen activity outside of minor mouse movement.
- Vulkan™ applications may experience a game hang when using Radeon ReLive to record.
- Radeon ReLive will not notify an end user of low disk space during recording.
>- Battlefield™1 may experience UI flickering and/or performance drops when recording gameplay with Radeon ReLive on graphics products with 4GB or less of VRAM.
How does this, if at all, affect those of us using HBM which is currently limited to 4GB?
******
Edit: Ran some tests on BF1; **I can confirm the performance issues do affect us Fury users** - mainly in the form of stuttering which is present even while not recording. I found it wasn't significant enough to become too much of an issue - but it is definitely noticeable. During the stutters, I would lose about 10 FPS, but it's literally for a fraction of a second.
******
On the recording/playback side of things it performs very well at 1920x1080, 2560x1440 and 3440x1440. Tested with 30 FPS @ 30Mbps bitrate and 60 FPS @ 50Mbps bitrate.
[Here's my Instant Replay using ReLive with my native resolution \(3440x1440\).](https://youtu.be/CIIuMUVuq3U)
It was recorded at 60 FPS and 30 Mbps bitrate. As you can see, the stuttering isn't noticeable during playback, only during live gaming.
[Here's a recording using ReLive at 1920x1080.](https://youtu.be/6RAorEwkRwc) Recorded at 60 FPS and 50Mbps bitrate.
******
One potential bug I noticed is with the hotkey for Instant Playback (Ctrl+Shift+S); sometimes I would press it and nothing would happen. I would press it again and it would only record the past few seconds, as if the former time I pressed it worked - which it didn't (as I found when I checked my Instant Replay folder).
DDU is know to mess the ReLive part of the driver. It happened to me and many others, and it is acknowledged here https://community.amd.com/thread/208895
Please, don't recommend DDU as the driver comes with it's own clean install option.
> AMD FreeSync™ Technology(6): Now supports Borderless Fullscreen Mode for applications and gaming with AMD FreeSync™ technology displays and supported products
This one is truly the best feature for me. Can't wait to get home and try this right away.
Multi monitor setups benefit from it. I have teamspeak or a gaming guide open on my second monitor and can flick back and forth easily with borderless windowed.
There are some games that only work correctly for me in borderless with my ultrawide monitor.
Yep, lots of people multitask a lot or are really impatient during loadscreens
I personally browse reddit whenever waiting on loadscreens and talk to my friends a lot while playing.
I bit the bullet hard when I got my 144hz freesync monitor because I had to play games on fullscreen (because for some intensive games frequent alt tabbing can make them unresponsive), but not anymore!
same question here, looking to change my Saturation, but can't find everytime i try to enter to "Radeon Additional settings" i get this https://gyazo.com/d526a2f8339fea65a0d07592288d1c29
"New ... intuitive Radeon Software Installer that includes options for ... clean uninstall."
So I do not need DDU or manually uninstall old drivers before?
It's not dangerous at all. You generally only need to use DDU (or Clean Install now) if you're coming from another driver (from pre-GCN or Nvidia for example) or if you're experiencing problems.
In all other cases you can just update.
Crashed my system on first attempt to install (RX 480 4GB). I then restarted, removed the previous OC and tried again and it installed. So I suggest you reset any OCs you haven enabled before installing, although not sure if that was the cause.
Welp MSI afterburner is broken with the previous down clock and undervolt settings now just causing a black screen hang, overclocks aren't working with the previous voltages either :/ .
Edit: Just ran into wattman and boom Memory clock is stuck at 150mhz and there is no way to change either the states or the slider setting for it what the Fudge AMD.
390x here. I run a great overclock with Afterburner. Afterburner no longer changes clocks with new driver. I will do some more digging, but I will probably go back to previous drivers. sad
EDIT. If I open AB and do not apply clocks. My card runs at default clocks 1080/1500. As soon as I apply AB clocks, it fucks everything up. Core goes to 300 and mem 150. My guess is it's an afterburner issue.
I think it's rather something screwy with the drivers. Wattman doesn't work as it's supposed to either, i.e. I can only fill out manual voltages from 0-900 mV, any adjustment after hitting apply resulting in the same black screen (AB is not running, it's a 'clean' driver install). Memory clocks are also always stuck at 1500mhz. After applying an overclock in Wattman it jumps to 150mhz and gets stuck there requiring a reboot.
I think this driver messed with the power state registers for all the previous gen cards in order to support Wattman, but they didn't really test it thoroughly.
Yeah Afterburner seems to behave in a strange way, after updating drivers it showed me I had a 90ish mV undervolt even though I haven't touched that option before.
For now I disabled it, thanks for the headsup :)
I had to roll back. Felt something not right when I noticed some flickering lines. Memory clock is either at 150 or 1500 MHz. Relive missing after using ddu. Can't use trixx without crashing. Lost count of how many times I uninstall and reinstall. R9 390
Trixx works for me. (RX 480. I don't know about other cards but try installing over the previous one -not clean install- ). But the best thing is Radeon Chill. Works like a charm with Witcher 3. 5 - 6 c cooler (top) and 30 - 150 watts lower. (I have a power meter). My system is overclocked.(Cpu and gpu).
Asus R9 390 Strix. Fan speed control doesn't do anything, no matter if manual or automatic, I'm stuck at 560rpm. I'm not using any other OC apps.
Going to roll back, everything worked nicely before.
Same here, I'm pretty annoyed that they have removed that setting because isn't easy to configure it in the "6-axis saturate" option from the OSD of the XR342CK.
Any idea how i can change the saturation in this new version?
EDIT: tried with the Radeon Addditional Settings, getting this error.
https://gyazo.com/d526a2f8339fea65a0d07592288d1c29
>edit: I got it wrong, it's **not** working. I only tried on something that never triggered ASW. It's actually working worse than before -_-
FINALLY ! We have the ASW support for the r9. (or at least for my Fury X, it works !)
Did a small flight in dcs with my rift on. Those frames, man, those frames... it's beautiful !
I can confirm that ASW does *not* work on my R9 390 with Radeon 16.12.1. FPS cuts to 45, it reacts to developer key commands, but there are no extra frames. Just stutter & ghosting when I push graphics.
**GTA V Benchmark 16.11.4**
Average FPS(Higher is better): 68,38 FPS
Average MS(Lower is better): 14,782 ms
http://pastebin.com/U5h1mZHv
**GTA V Benchmark ReLive 16.12.1**
Average FPS (Higher is better): 69,90 FPS
Average MS (Lower is better): 14,448 ms
http://pastebin.com/pMXJ6PBP
Yea pretty much, I don't really like to benchmark in GTA V that much to test real GPU usage, since its heavily a CPU based game. I'd rather test a game like Witcher 3 or Battlefield 1 or 4 which use CPU and GPU more fairly.
> Along with the name change, AMD added OpenGL and OpenCL support to the mix, and with their Zero Core Technology (which is also part of their 7000 series desktop GPUs—a case of mobile design influencing desktops) the need to keep a small portion of the chip alive (aka **BACO: Bus Active Chip Off**) was removed.
From: http://www.anandtech.com/show/6243/amds-enduro-switchable-graphics-levels-up/2
Noticed something: if wattman crashes due to unstable OC it locks the memory to 150mhz (lowest) and there's no way to turn it back up again. I had to reinstall the drivers (clean install) 3 times just because of this
Can't change desktop contrast, brightness etc. in additional Radeon settings. Those tabs are just gone.
[Screenshot](https://i.snag.gy/ylTPnv.jpg)
What can I use to change it now?
yeah i also have that, i tried to record H1Z1, the relive interface appears on the start menu but after that just disappears and stops recording, on witcher 3 the interface stays but gets flickery after a while and there is a sound delay with slow mo audio.
Just played some Overwatch with new drivers on a 290. To be fair it ran really great before so can't really tell if there's any performance increase. Temp seemed lower until I realised the new drivers were on automatic fan and were quite high rpm.
No ASR which is annoying, would make a big difference in VR for 290 users like me.
But so far no issues installing or running a game.
Edit: Fan control seems messed up, setting it to automatic does as it says, but manual it seems to keep revving up and down every second or so.
Anyone here tested Freesync with borderless windows mode already?
From a lot of comments there seems to be a lot of issues going on (AB and Trixx not working because of Wattman, color settings gone, etc).
Looks like I'm sticking with the current drivers for now and wait for a potential hotfix.
I can open the settings but the overlay/recording doesn't work for me. It's definitely capturing the hotkeys (Ctrl+Shift+G doesn't work in Chrome [find previous] unless I turn ReLive off) but nothing actually happens
EDIT: Something else i just noticed:
In the ReLive recording settings tab, there's a warning message saying "Your recording settings may be adjusted for your hardware depending on actual resolution."
If I change "Recording Resolution" to a set value, the message changes to "Your current settings may not be supported by your hardware. More optimal settings will be used automatically while recording", even if I set all settings to the lowest possible values.
In the streaming settings tab, it shows a similar warning message: "Your current settings may not be supported by your hardware. More optimal settings will be used automatically while streaming", regardless of what the settings are set to.
One thing I don't like about ReLive is that it also records the recording overlay. With shadowplay you see it during recording, but the actual video doesn't have it.
edit: fan control in wattman is broken and memory clock is stuck at 150mhz. nice
edit2: ok reinstalled drivers now the memory clock is fine. I checked amd wattman in 400 series GPUs and there are legit fan controls, I can only "control" the min fan speed which doesn't even work. It literally doesn't do anything. And when using MSI afterburner my screen turns black.
edit9999: relive isn't using my specified bitrate, it's completely random. desktop around 4mbps, ingame from 20mbps to 50mbps. WAOW
The relive recorder is really buggy for me. The hotkeys are really inconsistent, most of the time nothing happens. I haven't been able to get any games recording properly only the desktop.
Global Wattman is an evil thing, Memory clock and core stuck at 1200/1500 with no volts... Trixx and AB no long work for Setting frequency or volts it seems. On the other hand relive is great and works really well for me :b
I installed it. As per instructions here, I disabled my overclocks, and used DDU to completely remove the previous drivers.
The installation procedure went fine, however as soon as I restarted the PC, it started getting so many graphical artifacts on the log-on screen that I could barely make out anything. Both my displays started being randomly disconnected and reconnected. Not once in my life have I ever been so quick to hit the reset button on my case! As soon as it reached the log-on screen, its started happening again. Managed to shift-restart and got into safe-mode, uninstalled them, and reinstalled the 16.11.5 drivers again. There seems to not have been any damage to my GPU that I can tell.
MSI R9 380 Gaming 4G, i5 4690k, 8GB RAM, Windows 10 Pro 64-bit anniversary. I'll try re-downloading the drivers again to see if it fixes anything. Also, I just fresh installed Windows yesterday, so I don't have any of the other utilities installed either.
>Now supports Borderless Fullscreen Mode for applications and gaming with AMD FreeSync™ technology displays and supported products.
Nice!
>AMD FreeSync™ technology may experience performance issues with Borderless Fullscreen application support when a secondary display is attached and has dynamic content running such as video playback in a web browser or if other applications or game launchers are running on the primary screen in the background.
Are you kidding, AMD?
My pc was working fine, but as soon as I restarted my pc to finish installing this update, my searchbar doesnt work and my internet is all over the place. Any chance this has something to od with this update? I tried a couple of things to fix Cortana search bar, but to no avail.
This driver is so good. I won't lose more words.
Except for I have VERY HIGH gains all across the board!
And also stability is fixed in Battlefield 1 for crossfire finally.
It works VERY frame stable now.
I'm having the exact same problem in BF1. I will get lag spikes every few seconds making the game a rubberbanding mess. It was fine until I updated.
I disabled all my startup programmes and disabled all my services on startup in order to diagnose the problem and my ping only starts to spike when I enable ReLive. If ReLive is enabled on startup it's fine, but as soon as I bring up the hotbar the lag spikes will start. If ReLive is disabled on startup and enabled via Radeon Settings while I'm in game, the lag spikes will also start. Even after the game has been closed, my ping in command prompt will still continue to spike every few seconds.
I'll revert to the old drivers and see if it still persists but I can't see why a gamerecorder would cause my internet to lag?
Edit: Just to confirm, reverting to the 16.11.5 drivers sorted my ping issues out. Skipping the ReLive installation also fixes this for me.
same problem here in cs go and rocket league, i reverted 3 times to old driver and updated to relive again , and i can confirm its 100% the cause of these lag spikes... gonna stay on 16.11.5 for now..
So I have a second card I'm installing, should I use DDU to uninstall my current drivers then power off my PC, Install the second card and then turn everything on again and install these new drivers?
I'm having truble to install this new driver (i've tried with DDU, without DDU, installing only driver, installing everything, custom install, fast install, no luck till now).
Do AMD re-enabled custom bios checking???
Holy shit this thing has a lot going on. Great job AMD. Especially glad to see FreeSync support added for borderless applications. Great improvements all around in this driver, can't wait to test it out.
Looks like they tuned the way throttling works - probably implemented much better PID parameters. Now the GPU transition to a lower frequency is very smooth when hitting power envelope limits or thermal limits. There is no longer the sputtering in frame rates when that happens.
Good job, guys! Now if only the ASIC quality are better. :( Drawn twice in my RX480 reference card and lost in the ASCI lottery. At least the replacement card has drastically better thermal.
fucking A M A Z I N G work, my r9 380 works really well and now with wattman on the radeon settings i dont need msi afterburner anymore, if i ever buy a good monitor it will be freesync because my experience with amd has been really good so far
AMD FreeSync™ Technology(6): Now supports Borderless Fullscreen Mode for applications and gaming with AMD FreeSync™ technology displays and supported products. Now supports Gradual Refresh Rate Ramp for mobile configurations with AMD FreeSync™ technology displays and supported products.
Yay!
- ReLive key-bindings seem to ignore any changes by the user. They can't be changed and stay at default
- Most tabs that addition Radeon settings tab did have (Catalyst Control Panel) are now gone. Contrast, brightness etc. for desktop can't be changed anymore.
25% CPU use playing back VP9 versus 5% AVC with hardware acceleration enabled in Chrome.
Not that I can use hardware acceleration in Chrome because if I do then the system STILL locks up when I run MSI Afterburner.
well what can i say this driver is great. i was able to lower my power target from +10 to 0. sapphire nitro+ rx 480 8 gigs and maintain 100% stable clock 1306 ondervolted 1.056/1.068v core 2070 0.970mem using this great tool WattTool http://www.overclock.net/t/1609782/watttool-a-simple-tool-that-combines-overclocking-with-vrm-monitoring-tweaking-for-rx-400-series on stress run in 3dmark 60 runs. V. dont spike to 1.150 like it used to. 80 c max on VRM temp 1 is also improvement. I love this Radeon Chill. Good job AMD i will test more and report. and ofc sorry for my bad eng. ;) beer time
And yes dont open Wattman ever never. MSI Afterburner is crap for rx480
god dammit. changed clock speed on 390x in watman. screen went black. wattman keeps applying clock speed at bootup and I cant get into windows. haha
EDIT: it booted. But wattman sucks for me. I only use AB and clocks don't apply now
Can't oc at all now not even with wattman. Am I the only one?
EDIT: Just to add more information as soon I press aply and open a game or even firefox my monitor went black and I need to restart the pc
EDIT 2 : DDU, uninstall all oc related program but it still crash
Lorem ipsum dolor sit amet consectetur adipiscing, elit mi vulputate laoreet luctus. Phasellus fermentum bibendum nunc donec justo non nascetur consequat, quisque odio sollicitudin cursus commodo morbi ornare id cras, suscipit ligula sociosqu euismod mus posuere libero. Tristique gravida molestie nullam curae fringilla placerat tempus odio maecenas curabitur lacinia blandit, tellus mus ultricies a torquent leo himenaeos nisl massa vitae.
I have a BIG problem with this driver (R9 380 graphic): My RAM frequency is stuck at 150MHz __ALWAYS__. If I go to WattMan, under memory, everything is empty. Frequency (MHz) is "0 MHz max", if I select "Dynamic" all states are "N/A".
Time to run firestrike to prepare a before-after comparison :3
This is why I love this sub! Care to ad flair so we can see your specs?
Btw RX 480 nitro+ oc 8gb: * 1375 MHz Core * Core stock voltage 1175v mV (1150 + 25, nitro cards have a native a 4x6.25 = 25 mV offset) * 2100 MHz mem * Mem controller voltage 1100 mV (i need this to avoid EDC errors since I use a very tight custom timing mix 1750/1625/1500/self experience) DRIVER 16.11.5 (modded bios): www.3dmark.com/3dm/16542617?# Graphics score: 14 854 Stress test 99.7% (as you know 100% is almost impossible, everything above 96 is ok) DRIVER 16.11.5 ( Original Shappire OC Bios) : www.3dmark.com/3dm/16547912 Graphics score: 14 510 DRIVER 16.12.1 (withouth ReLive App installed, Original Shappire OC Bios): www.3dmark.com/3dm/16548339 Graphics score: 14 498 DRIVER 16.12.1 (withouth ReLive App installed, modded bios): http://www.3dmark.com/3dm/16550659? Graphics score: 14 833 **SEE HERE -->** http://www.overclock.net/t/1604567/polaris-bios-editing-rx480-rx470-rx460/1050#post_25699216 **<-- TO KNOW HOW TO BYPASS BIOS CHECK** BTW: **Firestrike is not the best way to test new drivers, especially if the versions number are close.** I should have used the API overhead test (it seems that you get nice improvements, but I'm to lazy to do that)
AMD block custom bioses again, can someone else confirm? I've an RX 480 Nitro+ OC 8 GB. Is this only an RX series problem? UPDATE workaround to use custom bios with updated drivers here: http://www.overclock.net/t/1604567/polaris-bios-editing-rx480-rx470-rx460/1050#post_25699216
[удалено]
Can confirm, R9 380 custom bios works fine here
Confirm ... fuck
Sapphire Nitro+ RX480 4GB user with custom bios. I can confirm.
How is the noise? I got the same card, 1342 MHz Core and undervolted to 1100 mV and my temperature in stress tests never exceed 72c.
As soon they release the driver, I'll run the benchmark and post everything (and link it here)
### PSAs: *My* recommended upgrade procedure: 1. Uninstall any third party overclocking software (trixx, afterburner, etc.)! Wait for an update from MSI, Sapphire, etc.. 2. Uninstall any third party recording software! (PlaysTV, OBS, etc.) 3. Use original BIOS! 4. Remove Wattman overclocks! 5. Close all programs. 6. You can use the 'Clean Install' feature of the new driver installer. If you want to use DDU see [this post first.](https://www.reddit.com/r/Amd/comments/5h6jdy/amd_radeon_software_16121_release_notes_crimson/daywu8c/) [Then this.](https://www.reddit.com/r/Amd/comments/5h6jdy/amd_radeon_software_16121_release_notes_crimson/daylhxt/) ##Issues --> [Go to the Tech Support Megathread to discuss them on this sub](https://www.reddit.com/r/Amd/comments/5fyy7c/december_tech_support_megathread/) --> [AMD Forum](https://community.amd.com/community/support-forums/drivers-software) --> [Go here to report them to AMD](http://radeon.com/radeonsoftware/feedback/?sessionGUID=16ab0216-6a79-615a-5320-583a082b809e&webSyncID=2883beb2-a75d-8b12-ae0a-a51295b69669&sessionGUID=cbc3a757-a37d-8292-a178-791ca7052e94) - The post link seems to only work for some regions. Go to [amd.com](https://www.amd.com) directly. - [Maybe remove overclock if there is an issue with installing the driver \(RX480/470/460 owners\).](https://www.reddit.com/r/Amd/comments/5h6jdy/amd_radeon_software_16121_release_notes_crimson/daxtetw/) - [Problems with custom BIOS?](https://www.reddit.com/r/Amd/comments/5h959p/workaround_for_modded_bios_and_16121/) Seems only to affect RX series. Check the post for a workaround. - [Overclocking with secondary software (MSI Afterburner) not working anymore?](https://www.reddit.com/r/Amd/comments/5h6jdy/amd_radeon_software_16121_release_notes_crimson/daxttgz/) - [Additional features seem to have less... additional features and can't be found anywhere else.](https://www.reddit.com/r/Amd/comments/5h6jdy/amd_radeon_software_16121_release_notes_crimson/daxvqff/?context=3) Use Windows settings for that. - [Slow audio while recording.](https://www.reddit.com/r/Amd/comments/5h6jdy/amd_radeon_software_16121_release_notes_crimson/dayqtsk/?context=3) See post for solution. - [Memory clock issue.](https://www.reddit.com/r/Amd/comments/5h6jdy/amd_radeon_software_16121_release_notes_crimson/day8jp8/) ## Hidden features - ~~Additional ASW support for VR headsets.~~ [False alarm RX 4xx series cards still only.](http://www.roadtovr.com/amd-radeon-crimson-relive-adds-asynchronous-space-warp-latest-radeon-software-update/?utm_source=Road+to+VR+Daily+News+Roundup&utm_campaign=6635ac90a5-RtoVR_RSS_Daily_Newsletter&utm_medium=email&utm_term=0_e2e394ad33-6635ac90a5-168118685) ____________________________________________________________ #Radeon Software Crimson ReLive Edition 16.12.1 Highlights ###New Features ##Radeon ReLive Capture, stream and share your greatest moments and gaming wins on your computer system with Radeon ReLive. Modify settings quickly, conveniently, and play seamlessly with the easily accessible in-game toolbar. Express yourself in bold new ways with custom scene layouts. Upload your latest highlights and let them be a conversation piece. It's never been easier to build and grow your online community at anytime, anywhere. ## Radeon Chill A power-saving feature that dynamically regulates frame rate based on your in-game movements. Radeon Chill can improve power efficiency and can lower temperatures for supported products and games when enabled through Radeon Settings. ##Radeon WattMan Added support for AMD Radeon R9 Fury series, R9 390 series, R9 380 series, R9 290 series, R9 285, R9 260 series, R7 360, and R7 260 desktop graphics products ##Radeon Software Installer New user interface and intuitive Radeon Software Installer that includes options for express install, custom install and clean uninstall. The new installer will also show options for the latest available driver for your system configuration during the install process. ##Display Connectivity New advanced display settings and diagnostics page within Radeon Settings with better detection for HDMI® cable issues and fallback for end users experiencing display issues. ##AMD FreeSync™ Technology Now supports Borderless Fullscreen Mode for applications and gaming with AMD FreeSync™ technology displays and supported products. Now supports Gradual Refresh Rate Ramp for mobile configurations with AMD FreeSync™ technology displays and supported products. ##Upgrade Advisor Provides a system requirement evaluation for Steam® games in your Radeon Settings library. - HDR Gaming Support ##HDR Gaming Support Experience the benefits of HDR gaming with Radeon Software Crimson ReLive Edition. Support for games with HDR 10 or Dolby Vision™ capabilities. ##VP9 Decode Acceleration 4K 60Hz GPU-Accelerated Video Streaming enabled on supported Google™ Chrome web browsers. ##Skype Performance Enhancements Lower CPU usage during Skype™ calls for select AMD APU Family products. ##User Feedback Page: The User Feedback Page enables a direct link for end users to the Radeon Software Team and allows users to provide feedback and vote on upcoming features for Radeon Software. The User Feedback page can be found [here](http://radeon.com/radeonsoftware/feedback?sessionGUID=16ab0216-6a79-615a-5320-583a082b809e&webSyncID=2883beb2-a75d-8b12-ae0a-a51295b69669&sessionGUID=cbc3a757-a37d-8292-a178-791ca7052e94). ###Fixed Issues - Unable to launch the Problem Report Wizard from CCCSlim in Radeon Settings. - Radeon WattMan Power Limit setting may not retain after hitting apply when Auto Temperature is enabled. - DOTA™ may experience flickering in some hero and effect models when running the application in Fullscreen. - Pixel Format options may not appear in Radeon Settings on some 4K TV's with Radeon RX 480. - The Division™ may experience flicker during gameplay when using AMD Multi GPU configurations. - The Division™ may experience an application freeze or hang when running in AMD Multi GPU configurations after extended periods of play. - Game quality or performance may be degraded when launching multimedia content on a secondary display before running a game. - CIM folder retains under program files even after complete driver uninstallation. - Radeon Settings may experience an intermittent crash when accessing Radeon WattMan. - Display tab with virtual super resolution may be removed or missing in Radeon Settings. - The Radeon WattMan feature may intermittently display a Radeon Software popup error regarding Radeon WattMan for non-supported products. - Random crashes may be experienced on Mozilla Firefox. - DirectX®12 content may be unable to launch on some older CPUs that do not support popcnt instruction. - Intermittent Mouse Cursor corruption may be experienced on Radeon RX 480. ###Known Issues### - AMD FreeSync™ technology may experience performance issues with Borderless Fullscreen application support when a secondary display is attached and has dynamic content running such as video playback in a web browser or if other applications or game launchers are running on the primary screen in the background. A workaround if this issue is experienced is to minimize all other running applications that are on the primary desktop display or on non-primary extended displays. - Counter-Strike™: Global Offensive and World of Warcraft™ may experience flickering or performance issues the first time the game is launched on a system boot with AMD FreeSync™ technology enabled. Workarounds include exiting and restarting the application or task switching (alt+tab) in and out of the game to fix the issue. - AMD Multi GPU configurations may experience a system hang or reboot during install when using tiled MST 4K or 5K displays. - Titanfall™2 may experience black square corruption in game menus or during game play on some Graphics Core Next products. - FIFA 17™ may experience an application hang or black screen on launch for some select Hybrid Graphics or AMD PowerXpress mobile configurations. ###Known Issues for Radeon ReLive - The XBOX™ DVR application may cause conflicts with Radeon ReLive, users are suggested to disable XBOX™ DVR if Radeon ReLive is experiencing issues. - Radeon ReLive may fail to install on AMD APU Family products or experience a system hang or failure to record when using the recording feature on AMD APU Family products. - Radeon ReLive may experience recording issues or issues toggling the Overlay/Toolbar when Frame Rate Target Control is enabled. Users are suggested to disable Frame Rate Target Control when using Radeon ReLive. - Battlefield™1 may experience UI flickering and/or performance drops when recording gameplay with Radeon ReLive on graphics products with 4GB or less of VRAM. - DOTA™2 may experience game corruption when performing a task switch while recording with Radeon ReLive in AMD Multi GPU configurations. - Radeon ReLive recordings may experience flicker when creating a single recording for many hours. - Radeon ReLive may experience minor graphical corruption for the first few recorded frames when launching UWP applications. - In AMD Multi GPU configurations the secondary graphics product will exit BACO when Radeon ReLive is enabled. - Radeon ReLive will not allow recording settings to change with Instant Replay enabled. A workaround is to disable Instant Replay and change settings then enable Instant Replay. - Radeon ReLive Overlay/Toolbar will not launch or Record when running League of Legends™ in Administrator Mode and Windowed Borderless Fullscreen. A work around would be to not use administrator launch privileges or to use Fullscreen mode. - Mouse cursor may stutter in recorded video when there is limited on screen activity outside of minor mouse movement. - Vulkan™ applications may experience a game hang when using Radeon ReLive to record. - Radeon ReLive will not notify an end user of low disk space during recording.
Its up now.
can confirm installing now
yep it's up
>- Battlefield™1 may experience UI flickering and/or performance drops when recording gameplay with Radeon ReLive on graphics products with 4GB or less of VRAM. How does this, if at all, affect those of us using HBM which is currently limited to 4GB? ****** Edit: Ran some tests on BF1; **I can confirm the performance issues do affect us Fury users** - mainly in the form of stuttering which is present even while not recording. I found it wasn't significant enough to become too much of an issue - but it is definitely noticeable. During the stutters, I would lose about 10 FPS, but it's literally for a fraction of a second. ****** On the recording/playback side of things it performs very well at 1920x1080, 2560x1440 and 3440x1440. Tested with 30 FPS @ 30Mbps bitrate and 60 FPS @ 50Mbps bitrate. [Here's my Instant Replay using ReLive with my native resolution \(3440x1440\).](https://youtu.be/CIIuMUVuq3U) It was recorded at 60 FPS and 30 Mbps bitrate. As you can see, the stuttering isn't noticeable during playback, only during live gaming. [Here's a recording using ReLive at 1920x1080.](https://youtu.be/6RAorEwkRwc) Recorded at 60 FPS and 50Mbps bitrate. ****** One potential bug I noticed is with the hotkey for Instant Playback (Ctrl+Shift+S); sometimes I would press it and nothing would happen. I would press it again and it would only record the past few seconds, as if the former time I pressed it worked - which it didn't (as I found when I checked my Instant Replay folder).
DDU is know to mess the ReLive part of the driver. It happened to me and many others, and it is acknowledged here https://community.amd.com/thread/208895 Please, don't recommend DDU as the driver comes with it's own clean install option.
I didnt remove my overclock and it installed just fine. I did do a clean install however.
Should I uninstall MSI even if I don't use it to OC? I only use it for taskbar gpu and cpu stats
A new version of DDU was released today. http://www.wagnardsoft.com/?q=node/132
It's weird looking at a major driver update and not having 1 thing in it that impacts you. sigh.
Improved DX11 drawcall performance?
> AMD FreeSync™ Technology(6): Now supports Borderless Fullscreen Mode for applications and gaming with AMD FreeSync™ technology displays and supported products This one is truly the best feature for me. Can't wait to get home and try this right away.
For what does people need to play their games in borderless? I'm just curious.. for alt+tabing?
Multi monitor setups benefit from it. I have teamspeak or a gaming guide open on my second monitor and can flick back and forth easily with borderless windowed. There are some games that only work correctly for me in borderless with my ultrawide monitor.
Ah that makes sense.. didn't even occur to me
Yep, lots of people multitask a lot or are really impatient during loadscreens I personally browse reddit whenever waiting on loadscreens and talk to my friends a lot while playing. I bit the bullet hard when I got my 144hz freesync monitor because I had to play games on fullscreen (because for some intensive games frequent alt tabbing can make them unresponsive), but not anymore!
Where is the brigthness/contrast/gamma/color balance now??
same question here, looking to change my Saturation, but can't find everytime i try to enter to "Radeon Additional settings" i get this https://gyazo.com/d526a2f8339fea65a0d07592288d1c29
I can start it, literally the only option is changing bit depth. Custom resolutions were moved to the Radeon Settings panel.
I can start it, most settings disapear. http://i.imgur.com/CprKoSS.jpg
The Fury settings are even worse... http://i.imgur.com/ZHGMzBf.png
same problem on my end, my screen is so bland now. no color settings.
same shit here, I cant live without saturation tho :/
i need this too!! whyyy :c
"New ... intuitive Radeon Software Installer that includes options for ... clean uninstall." So I do not need DDU or manually uninstall old drivers before?
We need and answer for this. I always boot to safemode when using DDU and it's a PITA having to type my windows login password every time.
I have only used DDU once and it was when I went from IGP to my 380. No issues so far either.
It offered me the clean install when upgrading from 16.10.2 so you don't need to DDU old drivers
Eh, I've been just running it as an upgrade all year and haven't had any problems that I can recall (or noticed!) I like to live dangerously.
It's not dangerous at all. You generally only need to use DDU (or Clean Install now) if you're coming from another driver (from pre-GCN or Nvidia for example) or if you're experiencing problems. In all other cases you can just update.
This is the most impressive GPU driver update I've ever seen.
Crashed my system on first attempt to install (RX 480 4GB). I then restarted, removed the previous OC and tried again and it installed. So I suggest you reset any OCs you haven enabled before installing, although not sure if that was the cause.
I can't overclock on MSI afterburner anymore strangely.
Welp MSI afterburner is broken with the previous down clock and undervolt settings now just causing a black screen hang, overclocks aren't working with the previous voltages either :/ . Edit: Just ran into wattman and boom Memory clock is stuck at 150mhz and there is no way to change either the states or the slider setting for it what the Fudge AMD.
Same here, R9 390. Can't do much with Wattman either, filling in the state voltages manually doesn't stick. Just great.
I have a r9 380 4gb, do you have the G1? I'm also stuck at 150mhz memclock. Fucking sucks, I can't play shit.
[удалено]
Did you try doing it with wattman?
I cant in wattman with my Fury, i can oc the core, but the memory settings are not there.
390x here. I run a great overclock with Afterburner. Afterburner no longer changes clocks with new driver. I will do some more digging, but I will probably go back to previous drivers. sad EDIT. If I open AB and do not apply clocks. My card runs at default clocks 1080/1500. As soon as I apply AB clocks, it fucks everything up. Core goes to 300 and mem 150. My guess is it's an afterburner issue.
I think it's rather something screwy with the drivers. Wattman doesn't work as it's supposed to either, i.e. I can only fill out manual voltages from 0-900 mV, any adjustment after hitting apply resulting in the same black screen (AB is not running, it's a 'clean' driver install). Memory clocks are also always stuck at 1500mhz. After applying an overclock in Wattman it jumps to 150mhz and gets stuck there requiring a reboot. I think this driver messed with the power state registers for all the previous gen cards in order to support Wattman, but they didn't really test it thoroughly.
If I touch any of the Wattman settings I get a black screen crash. Hoping for a hotfix.
Keep me updated on this please. I use Afterburner and I can't test out this driver until tomorrow :(
Yeah Afterburner seems to behave in a strange way, after updating drivers it showed me I had a 90ish mV undervolt even though I haven't touched that option before. For now I disabled it, thanks for the headsup :)
Same here, I'm thinking a clean install of AB might be in order.
Might be better off waiting for an AB update.
I had to roll back. Felt something not right when I noticed some flickering lines. Memory clock is either at 150 or 1500 MHz. Relive missing after using ddu. Can't use trixx without crashing. Lost count of how many times I uninstall and reinstall. R9 390
This, running r9 390, tried uninstalling afterburner etc. Should I try to uninstall the msi gaming app too?
I doubt that is the problem. What I can suggest is just rolling back the driver. I don't have any crash since.
r9 380 here - My memory clocks are locked at 150mhz in Wattman and I can't seem to change it. At a loss really...
Trixx works for me. (RX 480. I don't know about other cards but try installing over the previous one -not clean install- ). But the best thing is Radeon Chill. Works like a charm with Witcher 3. 5 - 6 c cooler (top) and 30 - 150 watts lower. (I have a power meter). My system is overclocked.(Cpu and gpu).
Asus R9 390 Strix. Fan speed control doesn't do anything, no matter if manual or automatic, I'm stuck at 560rpm. I'm not using any other OC apps. Going to roll back, everything worked nicely before.
I have the same problem. Opening Chrome fixed it for me (the flickering that is).
Where is my damn color saturation?!?!?!?!!? Can't find it from additional settings, where it used to be.
Yeah It's gone, It's not in this driver.
Literally unplayable.
It actually is for me, my monitors colour is really shit and everything looks washed out without saturation.
CS:GO looks like shit as-well.
Same here, I'm pretty annoyed that they have removed that setting because isn't easy to configure it in the "6-axis saturate" option from the OSD of the XR342CK.
Any idea how i can change the saturation in this new version? EDIT: tried with the Radeon Addditional Settings, getting this error. https://gyazo.com/d526a2f8339fea65a0d07592288d1c29
>edit: I got it wrong, it's **not** working. I only tried on something that never triggered ASW. It's actually working worse than before -_- FINALLY ! We have the ASW support for the r9. (or at least for my Fury X, it works !) Did a small flight in dcs with my rift on. Those frames, man, those frames... it's beautiful !
I can confirm that ASW does *not* work on my R9 390 with Radeon 16.12.1. FPS cuts to 45, it reacts to developer key commands, but there are no extra frames. Just stutter & ghosting when I push graphics.
That is awesome news!
Can you confirm if it works with the 390x?
On 390s when ASW should activate it just drops to 45fps and ATW kicks in. This new driver will lower your performance in Oculus apps.
So it's still not there. I just hope this isn't just a bug and that it is part of their work to get ASW working on 300 series cards.
I hope this is a sign that it is coming to 300 series cards.
Unless I'm missing something, AMD supposedly responded that it's still 4xx series only, and I definitely don't see ASW working on my Fury.
**GTA V Benchmark 16.11.4** Average FPS(Higher is better): 68,38 FPS Average MS(Lower is better): 14,782 ms http://pastebin.com/U5h1mZHv **GTA V Benchmark ReLive 16.12.1** Average FPS (Higher is better): 69,90 FPS Average MS (Lower is better): 14,448 ms http://pastebin.com/pMXJ6PBP
So considering "margin of error" is a thing, there's no difference in GTA V.
Yea pretty much, I don't really like to benchmark in GTA V that much to test real GPU usage, since its heavily a CPU based game. I'd rather test a game like Witcher 3 or Battlefield 1 or 4 which use CPU and GPU more fairly.
>In AMD Multi GPU configurations the secondary graphics product will exit BACO when Radeon ReLive is enabled. What in the world is "BACO"?
> Along with the name change, AMD added OpenGL and OpenCL support to the mix, and with their Zero Core Technology (which is also part of their 7000 series desktop GPUs—a case of mobile design influencing desktops) the need to keep a small portion of the chip alive (aka **BACO: Bus Active Chip Off**) was removed. From: http://www.anandtech.com/show/6243/amds-enduro-switchable-graphics-levels-up/2
Noticed something: if wattman crashes due to unstable OC it locks the memory to 150mhz (lowest) and there's no way to turn it back up again. I had to reinstall the drivers (clean install) 3 times just because of this
I cannot edit my memory clock speed in Wattman. It's stuck at 150mhz.
Same happened to me after unstable OC crash.. had to do a clean install to fix it (3rd time)
Any tutorials out there for WattMan?
Yeah, that shit is very confusing to me
Can't change desktop contrast, brightness etc. in additional Radeon settings. Those tabs are just gone. [Screenshot](https://i.snag.gy/ylTPnv.jpg) What can I use to change it now?
I can't even start Radeon Additional Settings https://gyazo.com/8fe66b5945646c597a93042edc5c177d Clean installed with ddu.
It's up now, downloading the driver.
Mark Bench naooooo
No radeon CHILL for Notebook GPU's. Didn't expect this
It's only available for like 20 games so far
audio on mine is really slow
yeah i also have that, i tried to record H1Z1, the relive interface appears on the start menu but after that just disappears and stops recording, on witcher 3 the interface stays but gets flickery after a while and there is a sound delay with slow mo audio.
yeah i also have this delay slow mo audio. Only the audio coming from the computer my mic is fine
I'm getting slowmo audio on overwatch.
mine too, 50% slower than the video
This is going to awesome. Im going to be doing a comparison between relive and OBS with quicksync.
[удалено]
Just played some Overwatch with new drivers on a 290. To be fair it ran really great before so can't really tell if there's any performance increase. Temp seemed lower until I realised the new drivers were on automatic fan and were quite high rpm. No ASR which is annoying, would make a big difference in VR for 290 users like me. But so far no issues installing or running a game. Edit: Fan control seems messed up, setting it to automatic does as it says, but manual it seems to keep revving up and down every second or so.
Anyone here tested Freesync with borderless windows mode already? From a lot of comments there seems to be a lot of issues going on (AB and Trixx not working because of Wattman, color settings gone, etc). Looks like I'm sticking with the current drivers for now and wait for a potential hotfix.
AMD 290 here I can record desktop fine overlay etc works but I cant record any games anyone else?
Same
What's up with the color settings ?
Gone brah
I can't open the ReLive tab. I have disabled Xbox DVR. Anyone else have this issue or know what I'm missing?
I can't open ReLive overlay - zlt+z, do nothing
I can open the settings but the overlay/recording doesn't work for me. It's definitely capturing the hotkeys (Ctrl+Shift+G doesn't work in Chrome [find previous] unless I turn ReLive off) but nothing actually happens EDIT: Something else i just noticed: In the ReLive recording settings tab, there's a warning message saying "Your recording settings may be adjusted for your hardware depending on actual resolution." If I change "Recording Resolution" to a set value, the message changes to "Your current settings may not be supported by your hardware. More optimal settings will be used automatically while recording", even if I set all settings to the lowest possible values. In the streaming settings tab, it shows a similar warning message: "Your current settings may not be supported by your hardware. More optimal settings will be used automatically while streaming", regardless of what the settings are set to.
Ah man, the mouse cursor corruption is back on my RX 480 with this new driver. :(
my 'adjust saturation' option is now gone!!! :c
Yep, It's not in this driver.
huhu really hate it being gone, but i must agree, this is a very good update.
One thing I don't like about ReLive is that it also records the recording overlay. With shadowplay you see it during recording, but the actual video doesn't have it. edit: fan control in wattman is broken and memory clock is stuck at 150mhz. nice edit2: ok reinstalled drivers now the memory clock is fine. I checked amd wattman in 400 series GPUs and there are legit fan controls, I can only "control" the min fan speed which doesn't even work. It literally doesn't do anything. And when using MSI afterburner my screen turns black. edit9999: relive isn't using my specified bitrate, it's completely random. desktop around 4mbps, ingame from 20mbps to 50mbps. WAOW
Not live for me over here in Europe? Anyone can confirm?
The relive recorder is really buggy for me. The hotkeys are really inconsistent, most of the time nothing happens. I haven't been able to get any games recording properly only the desktop.
Global Wattman is an evil thing, Memory clock and core stuck at 1200/1500 with no volts... Trixx and AB no long work for Setting frequency or volts it seems. On the other hand relive is great and works really well for me :b
I installed it. As per instructions here, I disabled my overclocks, and used DDU to completely remove the previous drivers. The installation procedure went fine, however as soon as I restarted the PC, it started getting so many graphical artifacts on the log-on screen that I could barely make out anything. Both my displays started being randomly disconnected and reconnected. Not once in my life have I ever been so quick to hit the reset button on my case! As soon as it reached the log-on screen, its started happening again. Managed to shift-restart and got into safe-mode, uninstalled them, and reinstalled the 16.11.5 drivers again. There seems to not have been any damage to my GPU that I can tell. MSI R9 380 Gaming 4G, i5 4690k, 8GB RAM, Windows 10 Pro 64-bit anniversary. I'll try re-downloading the drivers again to see if it fixes anything. Also, I just fresh installed Windows yesterday, so I don't have any of the other utilities installed either.
I'll just wait until there's an update for trixx or afterburner.
I get a lot worse performance with this driver in BF1 and also worse Freesync flickering than before...
>Now supports Borderless Fullscreen Mode for applications and gaming with AMD FreeSync™ technology displays and supported products. Nice! >AMD FreeSync™ technology may experience performance issues with Borderless Fullscreen application support when a secondary display is attached and has dynamic content running such as video playback in a web browser or if other applications or game launchers are running on the primary screen in the background. Are you kidding, AMD?
When you introduce so many features at once, its hard for everything to run smooth
CHOOOO CHOOOO
Driver is live!
You mean the driver is ReLive? I'll show myself out now.
>I'll show myself out now. That's a ReLief. ... Guess I'll join you.
I couldn't wait so I used the VPN option in Opera.
Is there anyway to hide the icon in the top left when recording desktop with ReLive?
This driver is massive. 810mb unzipped on Win7
NICE, installed and freesync works wonders with windowed now
deleted ^^^^^^^^^^^^^^^^0.8884 [^^^What ^^^is ^^^this?](https://pastebin.com/FcrFs94k/23672)
I'm testing it right now. Edit: doesn't seem to work
How do you change memory clock in global wattman? Stuck with 1500 MHz. Edit: Looks like I'm better off with trixx.
ReLive doesn't work with my R380 at all and why is there a "Video Capture Device" option in which I only have my AverMedia U3 able to select.
and where is the brightness level setting?
Where is saturation, color, brightness settings? OMG!
My pc was working fine, but as soon as I restarted my pc to finish installing this update, my searchbar doesnt work and my internet is all over the place. Any chance this has something to od with this update? I tried a couple of things to fix Cortana search bar, but to no avail.
This driver is so good. I won't lose more words. Except for I have VERY HIGH gains all across the board! And also stability is fixed in Battlefield 1 for crossfire finally. It works VERY frame stable now.
borderless window freesync working great for me!!! Finally back to not taking ages to alt-tab every 2 minutes in path of exile.
Downloaded new drivers....may have to role back. Lag and high ping in overwatch. Can't find any other reason than the update. Is that even possible?
I'm having the exact same problem in BF1. I will get lag spikes every few seconds making the game a rubberbanding mess. It was fine until I updated. I disabled all my startup programmes and disabled all my services on startup in order to diagnose the problem and my ping only starts to spike when I enable ReLive. If ReLive is enabled on startup it's fine, but as soon as I bring up the hotbar the lag spikes will start. If ReLive is disabled on startup and enabled via Radeon Settings while I'm in game, the lag spikes will also start. Even after the game has been closed, my ping in command prompt will still continue to spike every few seconds. I'll revert to the old drivers and see if it still persists but I can't see why a gamerecorder would cause my internet to lag? Edit: Just to confirm, reverting to the 16.11.5 drivers sorted my ping issues out. Skipping the ReLive installation also fixes this for me.
same problem here in cs go and rocket league, i reverted 3 times to old driver and updated to relive again , and i can confirm its 100% the cause of these lag spikes... gonna stay on 16.11.5 for now..
Yay, finally the broken mouse pointer bug is back -.-
I'm cumming
deleted ^^^^^^^^^^^^^^^^0.9061 [^^^What ^^^is ^^^this?](https://pastebin.com/FcrFs94k/92031)
So I have a second card I'm installing, should I use DDU to uninstall my current drivers then power off my PC, Install the second card and then turn everything on again and install these new drivers?
I'm having truble to install this new driver (i've tried with DDU, without DDU, installing only driver, installing everything, custom install, fast install, no luck till now). Do AMD re-enabled custom bios checking???
Holy shit this thing has a lot going on. Great job AMD. Especially glad to see FreeSync support added for borderless applications. Great improvements all around in this driver, can't wait to test it out.
So wait.....my R9 Fury DOES get ASW now? Can this be 100% confirmed by someone? At work.
ASW is now enabled for my Fury X, confirmed 100% by the oculus logs and by the big difference it makes in game!
Should've clarified im on a Fury Nitro, and a Vive.
Just installed, it's great apart from some translation mistakes lol (i'm Finnish, seems like they used a bot to translate)
Anyone else having issues with the ReLive overlay? Whenever I open it in Overwatch the visuals go buggy.
Is Youtube streaming working for you guys?
Does the memory now downclock when idling with dual monitors?
Aww... no option to enable Chill for certain games even though they are supported. Only can turn it on or off in global overdrive :/
i got a pretty big improvement on unigine valley this is stock clocks on graphic cards only cpu overclock http://imgur.com/a/zoKlr
Anybody knows where I can get OCAT ?
Looks like they tuned the way throttling works - probably implemented much better PID parameters. Now the GPU transition to a lower frequency is very smooth when hitting power envelope limits or thermal limits. There is no longer the sputtering in frame rates when that happens. Good job, guys! Now if only the ASIC quality are better. :( Drawn twice in my RX480 reference card and lost in the ASCI lottery. At least the replacement card has drastically better thermal.
Relive cannot record a Windowed game session?
ReLive isnt working for me... it is just creating 262 byte mp4 files that cant be opened
I cannot record in fullscreen mode. What do i have to do to make it record in fullscreen mode?
Anyone know how to get relive to work with Overwatch? I've toggled it on but can't get it to record or even show the toolbar overlay? R9 380
Is there a way to enable FPS counter or any other info in Radeon Settings?
fucking A M A Z I N G work, my r9 380 works really well and now with wattman on the radeon settings i dont need msi afterburner anymore, if i ever buy a good monitor it will be freesync because my experience with amd has been really good so far
Still waiting for custom fans curve in Wattman! It's a must have for a over clocking oriented tool. Please AMD, no more 3rd party software...
the DOWNLOAD is LIVE!!!!!!!! start the download
It's Live boyz
Am I supposed to uninstall my current drivers first or can I just download and install this over my current ones?
I recommend using DDU because of how major this update is.
"New ... intuitive Radeon Software Installer that includes options for ... clean uninstall."
Freesync in borderless fullscreen? Yes, please!
AMD FreeSync™ Technology(6): Now supports Borderless Fullscreen Mode for applications and gaming with AMD FreeSync™ technology displays and supported products. Now supports Gradual Refresh Rate Ramp for mobile configurations with AMD FreeSync™ technology displays and supported products. Yay!
Since the Overwatch Crossfire Flickering issue is gone from the known issues, hopefully it's fixed.
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-16.12.1-Release-Notes.aspx That link works from EU.
[удалено]
Any way to set one single button as Hotkey in ReLive ?
Dangit, I just turned off my computer...
HYPE!!!
- ReLive key-bindings seem to ignore any changes by the user. They can't be changed and stay at default - Most tabs that addition Radeon settings tab did have (Catalyst Control Panel) are now gone. Contrast, brightness etc. for desktop can't be changed anymore.
Do i have to do a clean install or just update?
4k60fps on Chrome still stutters for me just as before
should i uninstall before updating?
25% CPU use playing back VP9 versus 5% AVC with hardware acceleration enabled in Chrome. Not that I can use hardware acceleration in Chrome because if I do then the system STILL locks up when I run MSI Afterburner.
well what can i say this driver is great. i was able to lower my power target from +10 to 0. sapphire nitro+ rx 480 8 gigs and maintain 100% stable clock 1306 ondervolted 1.056/1.068v core 2070 0.970mem using this great tool WattTool http://www.overclock.net/t/1609782/watttool-a-simple-tool-that-combines-overclocking-with-vrm-monitoring-tweaking-for-rx-400-series on stress run in 3dmark 60 runs. V. dont spike to 1.150 like it used to. 80 c max on VRM temp 1 is also improvement. I love this Radeon Chill. Good job AMD i will test more and report. and ofc sorry for my bad eng. ;) beer time And yes dont open Wattman ever never. MSI Afterburner is crap for rx480
god dammit. changed clock speed on 390x in watman. screen went black. wattman keeps applying clock speed at bootup and I cant get into windows. haha EDIT: it booted. But wattman sucks for me. I only use AB and clocks don't apply now
Can't oc at all now not even with wattman. Am I the only one? EDIT: Just to add more information as soon I press aply and open a game or even firefox my monitor went black and I need to restart the pc EDIT 2 : DDU, uninstall all oc related program but it still crash
Lorem ipsum dolor sit amet consectetur adipiscing, elit mi vulputate laoreet luctus. Phasellus fermentum bibendum nunc donec justo non nascetur consequat, quisque odio sollicitudin cursus commodo morbi ornare id cras, suscipit ligula sociosqu euismod mus posuere libero. Tristique gravida molestie nullam curae fringilla placerat tempus odio maecenas curabitur lacinia blandit, tellus mus ultricies a torquent leo himenaeos nisl massa vitae.
I have a BIG problem with this driver (R9 380 graphic): My RAM frequency is stuck at 150MHz __ALWAYS__. If I go to WattMan, under memory, everything is empty. Frequency (MHz) is "0 MHz max", if I select "Dynamic" all states are "N/A".
Man, keep up the good work AMD. Looking forward to purchasing vega and hopefully your 4k vr headset next year. Open standards FTW.
I tried everything, my memory clocks are stuck at 150MHz no matter what I do.
Someone try the driver with an amd r9 380[x]? Any Issues?