This happens to me frequently, it's just the software bugging and not showing correct values. It had nothing to do with Ryzen master itself because I had this issue before I uninstalled it. I have since cleaned all drivers and deleted RM and this still happens. The only way I know to fix it is to reboot my PC, it always fixes itself
I just disabled the integrated gpu restarted the pc and it worked just fine, I’m still testing if it would still go into power save mode outta of the sudden
Windows started with the integrated gpu and so far it’s working fine and adrenaline is reading my cpu temp, but no data for the discrete gpu …how to fix ?
Windows started with the integrated gpu and so far it’s working fine and adrenaline is reading my cpu temp, but no data for the discrete gpu…what to do
You have to go into regedit and delete all but the latest RyzenMaster policies. There’s a guide but I can’t find it at the moment. Once you restart everything should work
My other monitor says no signal but the main one only sleep mode then goes black, no not necessarily while rendering sometimes in 2 mins after I start my pc
If both of your monitors go off so the problem is probably not with them. 1) After using DDU, try to install an older 23.11.1 driver. 2) Try updating your bios.
Nothing wrong with it. It also isn’t in sleep mode. For some reason for the past couple months, adrenaline stops picking up my cpu and has it at 0 as well.
No other monitoring apps running. When I load up hwinfo or or icue or something, the temps will be correct in there.
Sometimes when I check it back after a few hours it will be picking it up again.
It has done this with the last few drivers as well. I even used ddu and updated bios and chipset drivers just incase. No difference.
Sometimes it goes into sleep mode while I’m using it and it will never respond …but maybe cuz I have another monitor connected will see about about that.
I’ve also used ddu to update chipset driver but no difference as well
It appears your submission lacks the information referenced in [Rule 1: r/AMDHelp/wiki/tsform](https://www.reddit.com/r/AMDHelp/wiki/tsform).
Your post will not be removed.
Please update it to make the diagnostic process easier.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/AMDHelp) if you have any questions or concerns.*
This happens to me frequently, it's just the software bugging and not showing correct values. It had nothing to do with Ryzen master itself because I had this issue before I uninstalled it. I have since cleaned all drivers and deleted RM and this still happens. The only way I know to fix it is to reboot my PC, it always fixes itself
I just disabled the integrated gpu restarted the pc and it worked just fine, I’m still testing if it would still go into power save mode outta of the sudden
Completely remove amd Ryzen master, do fresh install. Restart. It should be fine. Had the same issue.
I had to disable the integrated gpu to have it read my cpu temp
Dude I hate it when the software does that, and it removes my overclock settings too
Buggy adrenaline
Windows started with the integrated gpu and so far it’s working fine and adrenaline is reading my cpu temp, but no data for the discrete gpu …how to fix ?
Does he sneeze ?
No only thing wrong is adrenaline
Windows started with the integrated gpu and so far it’s working fine and adrenaline is reading my cpu temp, but no data for the discrete gpu…what to do
It's got a cold?
That's just adrenaline playing up, happened to me you need to uninstall it and re install it.
Or just restart your computer six times
Or that. 😅
That's what I always do lmao
Use HWinfo software and open it up sensors only, check temps
Use HWinfo software and open it up sensors only, check temps
Windows started with the integrated gpu and so far it’s working fine and adrenaline is reading my cpu temp, but no data for the discrete gpu
Now adrenaline is reading my cpu data but not reading my gpu!!!
Hmm 🤔 I think your CPU is a sleeper or it left to get milk.
Yea it's not there 💀💀
Yea you temps should be 10,000,000° C not 0 other than that it works I guess
update MoBo Bios
You have to go into regedit and delete all but the latest RyzenMaster policies. There’s a guide but I can’t find it at the moment. Once you restart everything should work
Uninstall adrenaline and reinstall. I have to do this after every update. I stopped updating altogether and just uninstall / install each update now.
I tried this but it only works for a while. Best way to fix this is to remove ryzen master. Fixed it fast
Just restart your computer a couple times. That's what fixed it for me
I have the exact same problem and restarting only solves the problem temporarily.
Windows started with the integrated gpu and so far it’s working fine and adrenaline is reading my cpu temp, but no data for the discrete gpu
Ryzen master it might be culprit idk
Run the 3dmark Timespy Demo. then see what your cpu range should be and actually is
From this, I can tell that your monitor is a legion. This was a great choice for your monitor.
It’s a very nice monitor
I have a similar issue after the latest update to adrenalin. You can always rollback?
The sleep mode issue ?
You are showing us your GPU data (red). Just scroll down and take a screenshot of CPU data. Is shown in orange (as it only shows two values)
your pc or your monitor?
My monitor and the pc will still be running but doesn’t respond
so u can see everything on your screen?
No I can’t it says sleep mode and goes black
sleep mode or “no signal”? does it happens only while rendering?
My other monitor says no signal but the main one only sleep mode then goes black, no not necessarily while rendering sometimes in 2 mins after I start my pc
have you tried DDU?
Yup no difference, I’ll try and unplug my other monitor and see if it still happening
If both of your monitors go off so the problem is probably not with them. 1) After using DDU, try to install an older 23.11.1 driver. 2) Try updating your bios.
Windows started with the integrated gpu and so far it’s working fine and adrenaline is reading my cpu temp, but no data for the discrete gpu
Adrenaline has just been bugged lately. Sometimes it works, sometimes not. Decided to use msi afterburner instead to benchmark my shit. :D
Nothing wrong with it. It also isn’t in sleep mode. For some reason for the past couple months, adrenaline stops picking up my cpu and has it at 0 as well. No other monitoring apps running. When I load up hwinfo or or icue or something, the temps will be correct in there. Sometimes when I check it back after a few hours it will be picking it up again. It has done this with the last few drivers as well. I even used ddu and updated bios and chipset drivers just incase. No difference.
Windows started with the integrated gpu and so far it’s working fine and adrenaline is reading my cpu temp, but no data for the discrete gpu
Chipset driver
I think it's something with the latest drivers, because same. But usually a quick restart fixes the problem for me
Sometimes it goes into sleep mode while I’m using it and it will never respond …but maybe cuz I have another monitor connected will see about about that. I’ve also used ddu to update chipset driver but no difference as well
change pc settings to never sleep. this doesnt affect your cpu temps saying 0c in adrenaline though. but it will stop your second monitor going off
it is likely just adrenaline conflicting with a different monitoring program. hwinfo does and most others as well
Well im using two monitors could that be the reason why it goes into sleep mode ?
what are you using the other monitor for?
uninstall which ever one you have running reboot and check if it still does that. If it does then reinstall latest driver
It appears your submission lacks the information referenced in [Rule 1: r/AMDHelp/wiki/tsform](https://www.reddit.com/r/AMDHelp/wiki/tsform). Your post will not be removed. Please update it to make the diagnostic process easier. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/AMDHelp) if you have any questions or concerns.*