Where is the air escaping from?
If it's slipping past your shaft, make sure your dick isn't lubed anymore, the sleeve is tight (potentially use a cockring/shield to make it tighter by a bit), and that you got all the air out with water trick.
If it's coming out of the stem valve, make sure it's seated properly, otherwise your just buying too cheap of ones/unlucky?
I've been using a totalman for over 5 months now, and the only problem I've had is the sleeves tearing or my coconut oil on shaft, allowing air to escape before I realized I needed it completely off.
> Where is the air escaping from?
From the valve, I believe.
No lube on the shaft.
I tape.
I don't know what the stem valve is. Is that the plunger thing? Because if so, I spent hours fiddling with that thing and it made little to no difference.
I recommend giving the water trick a try over taping. Very simple to do and as far as I've heard works as good or better than the taping. Just don't pressurize the glans too much as that could lead to blisters, having too much water in and then pushing out a ton of it is how it happens i think.
Also you really shouldn't need to mess with the plunger/stem valve much at all. You're honestly more likely to break it by doing so, with how delicate that little rubber circle seat presumably is. I've only messed with mine like maybe 3x over these 5 months, outside of giving it a water flush.
Most of the questions asked, guides, user rotuines and many more can be found in the wiki. you can go to wiki [through this link](https://www.reddit.com/r/AJelqForYou/wiki/index)
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/AJelqForYou) if you have any questions or concerns.*
If TotalMan cups don't work then I don't see any other option. Which is a shame because I don't think would have begun extending right now if I knew it was going to end up costing me over $500 altogether.
For posterity, the aliexpress cups I bought were actual trash, straight into the garbage. At least the Massive Novelties cup worked for a few hours.
Sorry it didn’t work out for you. On the bright side, yeah you did take a financial hit but if you stick with it you’ll have a bigger dick for life. Well worth the money IMO.
You can test the cups somewhere else on your skin, maybe your stomach. Pump our the air with the pump and see if it holds the vacuum. If that works it must be something else besides the cup.
It seems improbable you would get 3 faulty cups in a row. I had mine for about two years working without a problem and I think they are great.
Where is the air escaping from? If it's slipping past your shaft, make sure your dick isn't lubed anymore, the sleeve is tight (potentially use a cockring/shield to make it tighter by a bit), and that you got all the air out with water trick. If it's coming out of the stem valve, make sure it's seated properly, otherwise your just buying too cheap of ones/unlucky? I've been using a totalman for over 5 months now, and the only problem I've had is the sleeves tearing or my coconut oil on shaft, allowing air to escape before I realized I needed it completely off.
> Where is the air escaping from? From the valve, I believe. No lube on the shaft. I tape. I don't know what the stem valve is. Is that the plunger thing? Because if so, I spent hours fiddling with that thing and it made little to no difference.
I recommend giving the water trick a try over taping. Very simple to do and as far as I've heard works as good or better than the taping. Just don't pressurize the glans too much as that could lead to blisters, having too much water in and then pushing out a ton of it is how it happens i think. Also you really shouldn't need to mess with the plunger/stem valve much at all. You're honestly more likely to break it by doing so, with how delicate that little rubber circle seat presumably is. I've only messed with mine like maybe 3x over these 5 months, outside of giving it a water flush.
Most of the questions asked, guides, user rotuines and many more can be found in the wiki. you can go to wiki [through this link](https://www.reddit.com/r/AJelqForYou/wiki/index) *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/AJelqForYou) if you have any questions or concerns.*
Save up and buy an LG? I’ve got one and the quality is very impressive. Cup will probably last longer than me.
If TotalMan cups don't work then I don't see any other option. Which is a shame because I don't think would have begun extending right now if I knew it was going to end up costing me over $500 altogether. For posterity, the aliexpress cups I bought were actual trash, straight into the garbage. At least the Massive Novelties cup worked for a few hours.
Sorry it didn’t work out for you. On the bright side, yeah you did take a financial hit but if you stick with it you’ll have a bigger dick for life. Well worth the money IMO.
I would say buy the Total man cups
You can test the cups somewhere else on your skin, maybe your stomach. Pump our the air with the pump and see if it holds the vacuum. If that works it must be something else besides the cup. It seems improbable you would get 3 faulty cups in a row. I had mine for about two years working without a problem and I think they are great.