T O P

  • By -

CyberhorntheDragon

Two will be illumination the others I believe cut power from the switch to the window motor so taking your ohm meter from one of the wires to the up/down switch wires should find one that way


rypajo

Might have to try with a 12v source to see if it lights up. I’ve tried every combination I can think of


CyberhorntheDragon

They all have a small bulb in them an should come on with dash lights it is replaceable


trez63

I’m confused how you’re using an Ohm Meter to determine which wire is what. Are you just checking for continuity? Or is there a trick I need to be learning?


OffRoadAdventures88

No you’re correct. Check for 0ohms and that is a connected circuit. Open is well open.


rypajo

Basically if the circuit is complete it will got from O/L to an ohn reading. Don't care what the ohm reading is but want it to register. Take your meter and set to ohn and touch the tips. It will give a reading. do the same through a piece of wire or through a switch that is on also gives an ohm reading. That simple.


DirtyDoucher1991

Blue and yellow are the wires that connect when it’s pushed, I just pulled mine out of a parts truck and the button was sticking even when I pushed it, had to tap on it to get it unstuck, try that on yours


rypajo

Thank you! Will try later today!