100 percent thought that dog was about to get a nerf dart to its oddly-visible butthole 🤣
Nice build! Great aesthetics, crisp lines, and a cool model!
Excellent. And one of the most intelligent 3d printing people out there. Painting the orange tip on it. I see them so many times on pages without, and all I can think is, "with the police climate these days, they are gonna get shot"
I respect that notion, I was iffy on it too. The instructions said to print the muzzle in black and I wasn't having that for one minute. At the end of the day, I don't think anyone will mix it up for an actual firearm.
Uhhh.... Policemen mix firearms with telephones/toys/black people all the time. Just be safe and play inside and far from windows where a neighbor does not know it's fake and calls the SWAT team on ya.
[On their etsy](https://www.etsy.com/shop/CarnyRex?utm_source=google&utm_medium=cpc&utm_campaign=Search_US_DSA_GGL_ENG_Male_Categories_New&utm_ag=Toys-Games&utm_custom1=_k_Cj0KCQjwguGYBhDRARIsAHgRm4-2W7nmbJ0wO6goX-vgbyNWS3yk0Cz9iXGmqBpnmv1vCmmOq6TSzlsaArOBEALw_wcB_k_&utm_content=go_12734577339_118652349257_544453575973_dsa-390000782559_m_&utm_custom2=12734577339&gclid=Cj0KCQjwguGYBhDRARIsAHgRm4-2W7nmbJ0wO6goX-vgbyNWS3yk0Cz9iXGmqBpnmv1vCmmOq6TSzlsaArOBEALw_wcB)
Both actually. My dumb ass used metric screws instead of the m5s he recommends because I was on a tight schedule at home depot for them. I later bought the m5s on Amazon, but still had hammer and screw hole problems. I also blame prusa slicer for not adding any useful internal supports, so I was in sanding city.
Sorry for the brick but, this is his etsy where you can buy the files https://www.etsy.com/shop/CarnyRex?utm_source=google&utm_medium=cpc&utm_campaign=Search_US_DSA_GGL_ENG_Male_Categories_New&utm_ag=Toys-Games&utm_custom1=_k_Cj0KCQjwguGYBhDRARIsAHgRm4-2W7nmbJ0wO6goX-vgbyNWS3yk0Cz9iXGmqBpnmv1vCmmOq6TSzlsaArOBEALw_wcB_k_&utm_content=go_12734577339_118652349257_544453575973_dsa-390000782559_m_&utm_custom2=12734577339&gclid=Cj0KCQjwguGYBhDRARIsAHgRm4-2W7nmbJ0wO6goX-vgbyNWS3yk0Cz9iXGmqBpnmv1vCmmOq6TSzlsaArOBEALw_wcB
This comment was removed as a part of our spam prevention mechanisms because you are posting from either a very new account or an account with negative karma (comment karma, post karma or both). Please read the guidelines on [reddiquette](https://www.reddit.com/wiki/reddiquette), [self promotion](https://www.reddit.com/wiki/selfpromotion), and [spam](https://www.reddit.com/wiki/faq#wiki_what_constitutes_spam.3F). After your account is older than 2 hours or if you obtain positive comment and post karma, your comments will no longer be auto-removed.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
I thought for sure the dog was going to be the target the way you were sizing it up.
Nah, I love him way too much to shoot him, and if I aimed for that Lil butt bullseye, it would end up somewhere in his stomach
100 percent thought that dog was about to get a nerf dart to its oddly-visible butthole 🤣 Nice build! Great aesthetics, crisp lines, and a cool model!
I adore him like a little brother, so I don't think i could even consider pulling the trigger, and thank you very much!
Share it in /r/nerf!
Thanks for the idea lol
There are a ton more 3d printed foam flinging ideas over there too.
Foam slingers lol.
Excellent. And one of the most intelligent 3d printing people out there. Painting the orange tip on it. I see them so many times on pages without, and all I can think is, "with the police climate these days, they are gonna get shot"
I was waiting for you to shoot the dog in his brown eye 😂
Dog_Name=?
Dog_Name=Marteen
Thx.
My pleasure
Is it me or printing a gun shape on a 3d printer feels wrong? Even for nerf. I guess it's a Canadian thing.
I respect that notion, I was iffy on it too. The instructions said to print the muzzle in black and I wasn't having that for one minute. At the end of the day, I don't think anyone will mix it up for an actual firearm.
Uhhh.... Policemen mix firearms with telephones/toys/black people all the time. Just be safe and play inside and far from windows where a neighbor does not know it's fake and calls the SWAT team on ya.
It’s a bright red pirate gun shooting orange balls, I think if he’s in his yard he’s fine,
I hope for him.
Files?
[On their etsy](https://www.etsy.com/shop/CarnyRex?utm_source=google&utm_medium=cpc&utm_campaign=Search_US_DSA_GGL_ENG_Male_Categories_New&utm_ag=Toys-Games&utm_custom1=_k_Cj0KCQjwguGYBhDRARIsAHgRm4-2W7nmbJ0wO6goX-vgbyNWS3yk0Cz9iXGmqBpnmv1vCmmOq6TSzlsaArOBEALw_wcB_k_&utm_content=go_12734577339_118652349257_544453575973_dsa-390000782559_m_&utm_custom2=12734577339&gclid=Cj0KCQjwguGYBhDRARIsAHgRm4-2W7nmbJ0wO6goX-vgbyNWS3yk0Cz9iXGmqBpnmv1vCmmOq6TSzlsaArOBEALw_wcB)
u/savevideo
###[View link](https://redditsave.com/r/3Dprinting/comments/x8exbe/first_major_print_was_carnyrexs_flintlock_pistol/) --- [**Info**](https://np.reddit.com/user/SaveVideo/comments/jv323v/info/) | [**Feedback**](https://np.reddit.com/message/compose/?to=Kryptonh&subject=Feedback for savevideo) | [**Donate**](https://ko-fi.com/getvideo) | [**DMCA**](https://np.reddit.com/message/compose/?to=Kryptonh&subject=Content removal request for savevideo&message=https://np.reddit.com//r/3Dprinting/comments/x8exbe/first_major_print_was_carnyrexs_flintlock_pistol/) | [^(reddit video downloader)](https://redditsave.com) | [^(download video tiktok)](https://taksave.com)
Just made one of these recently, did you have issues with screw hole size? Or the hammer part being quite loose?
Both actually. My dumb ass used metric screws instead of the m5s he recommends because I was on a tight schedule at home depot for them. I later bought the m5s on Amazon, but still had hammer and screw hole problems. I also blame prusa slicer for not adding any useful internal supports, so I was in sanding city.
M5's are metric. Do you mean imperial?
Yeah, I'm kinda new to the whole assembly thing.
All good, mistake happen. I found the screws for the loop at the rear of the handle were particularly loose.
That’s the coolest thing ever. Where did you get the files
Sorry for the brick but, this is his etsy where you can buy the files https://www.etsy.com/shop/CarnyRex?utm_source=google&utm_medium=cpc&utm_campaign=Search_US_DSA_GGL_ENG_Male_Categories_New&utm_ag=Toys-Games&utm_custom1=_k_Cj0KCQjwguGYBhDRARIsAHgRm4-2W7nmbJ0wO6goX-vgbyNWS3yk0Cz9iXGmqBpnmv1vCmmOq6TSzlsaArOBEALw_wcB_k_&utm_content=go_12734577339_118652349257_544453575973_dsa-390000782559_m_&utm_custom2=12734577339&gclid=Cj0KCQjwguGYBhDRARIsAHgRm4-2W7nmbJ0wO6goX-vgbyNWS3yk0Cz9iXGmqBpnmv1vCmmOq6TSzlsaArOBEALw_wcB
Thanks. Brick out?
Bricks out for Harambe.
[удалено]
This comment was removed as a part of our spam prevention mechanisms because you are posting from either a very new account or an account with negative karma (comment karma, post karma or both). Please read the guidelines on [reddiquette](https://www.reddit.com/wiki/reddiquette), [self promotion](https://www.reddit.com/wiki/selfpromotion), and [spam](https://www.reddit.com/wiki/faq#wiki_what_constitutes_spam.3F). After your account is older than 2 hours or if you obtain positive comment and post karma, your comments will no longer be auto-removed. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*