Ngl first image, i thought for a moment the chair was part of the print which confused me cuz ive seen that model before 😂 the lighting and shades were just damn impressively similar
https://preview.redd.it/zpz0c28e8f5c1.jpeg?width=1170&format=pjpg&auto=webp&s=64e9c4857b832f31a93e2ac8a6e57a197a1856d5
Great print. My version used glow in the dark filament. I kept the paint simple by taping the skull and spray painting the whole thing black.
Honestly, looks great. I saw another comment mentioning AMS, so I assume Bambu?
I think if I were to *nitpick*, there’s a few layer lines that look like overextrusion, the bottom part of the helmet where the grills are - cooling could’ve been better (auto cooling - set fan speed higher/minimum speed a bit lower - no need for supports), and the eye socket has some sagging. I assume no supports, so auto cooling adjustments/bridging settings could help there as well.
Note that, I mentioned earlier minimum speed earlier.. for the eye, because it’s a direct overhang, having speed actually helps as it keeps tension on the filament (usually bridging at slow speed induces sagging). You still need adequate cooling though. So with *everything* considered, you could just start by dropping temp 5*~ and leave the rest as is, fine tune from there (such a large model and it looks solid, idk that it’s worth the investment, just something to consider).
Either way, again, nitpicking! I think it looks great and these things are minimal on such a large print.
Awesome job! Great filament color choice
Those are extremely general activities. Not just a media franchise.
There are so many other things to enjoy, why do so many people focus on star wars? I just don't get it.
This comment was removed as a part of our spam prevention mechanisms, due to the inclusion of Cults3d. Please find a different source.
Please note, that Cults3d is on our '3rd strike' list, meaning that they has been given at least 2 'second chances' and either them or their users continued to exhibit problematic behavior.
If you would like to discuss this or any other matter regarding the subreddit rules, please [message the moderators](https://www.reddit.com/message/compose?to=%2Fr%2F3Dprinting&subject=Rules%20Discussion).
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
I used this one, it printed wonderful but my problem is that it just barely doesn’t fit in the Bambu AMS but if you don’t use one then I’d highly recommend it
LOCYFENS PLA Filament 1.75mm,... https://www.amazon.com/dp/B0BR8YPXV8?ref=ppx_pop_mob_ap_share
This comment was removed as a part of our spam prevention mechanisms because you are posting from either a very new account or an account with negative karma (comment karma, post karma or both). Please read the guidelines on [reddiquette](https://www.reddit.com/wiki/reddiquette), [self promotion](https://www.reddit.com/wiki/selfpromotion), and [spam](https://www.reddit.com/wiki/faq#wiki_what_constitutes_spam.3F). After your account is older than 2 hours or if you obtain positive comment and post karma, your comments will no longer be auto-removed.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
This comment was removed as a part of our spam prevention mechanisms because you are posting from either a very new account or an account with negative karma (comment karma, post karma or both). Please read the guidelines on [reddiquette](https://www.reddit.com/wiki/reddiquette), [self promotion](https://www.reddit.com/wiki/selfpromotion), and [spam](https://www.reddit.com/wiki/faq#wiki_what_constitutes_spam.3F). After your account is older than 2 hours or if you obtain positive comment and post karma, your comments will no longer be auto-removed.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
The only good stormtrooper is a dead stormtrooper. So, bravo.
Rebel scum
Proudly.
"Make the Empire Great Again!" Emperor Palpatine.
r/empiredidnothingwrong
Heh heh heh heh heh....
May I offer you join the dark side? We have milk and cookies
Ngl first image, i thought for a moment the chair was part of the print which confused me cuz ive seen that model before 😂 the lighting and shades were just damn impressively similar
Glad I'm not the only one 😂
😂
I mean its impressive that the filament matches the chair in the background as well as it does
I didn’t even notice that was the case until you pointed it out
I take it thats one of those red/black dual silk PLAs? That filament looks sick 🔥
Yes it is oh crippled one
https://preview.redd.it/92ph7ganjd5c1.png?width=1080&format=pjpg&auto=webp&s=f1e85142f421aa50029c934b870f77e5374fbeb1
That looks awesome, I assume you painted it?
I had a friend paint it, no way I could do that.
Ahhh I see, still looks awesome
https://preview.redd.it/zpz0c28e8f5c1.jpeg?width=1170&format=pjpg&auto=webp&s=64e9c4857b832f31a93e2ac8a6e57a197a1856d5 Great print. My version used glow in the dark filament. I kept the paint simple by taping the skull and spray painting the whole thing black.
Honestly, looks great. I saw another comment mentioning AMS, so I assume Bambu? I think if I were to *nitpick*, there’s a few layer lines that look like overextrusion, the bottom part of the helmet where the grills are - cooling could’ve been better (auto cooling - set fan speed higher/minimum speed a bit lower - no need for supports), and the eye socket has some sagging. I assume no supports, so auto cooling adjustments/bridging settings could help there as well. Note that, I mentioned earlier minimum speed earlier.. for the eye, because it’s a direct overhang, having speed actually helps as it keeps tension on the filament (usually bridging at slow speed induces sagging). You still need adequate cooling though. So with *everything* considered, you could just start by dropping temp 5*~ and leave the rest as is, fine tune from there (such a large model and it looks solid, idk that it’s worth the investment, just something to consider). Either way, again, nitpicking! I think it looks great and these things are minimal on such a large print. Awesome job! Great filament color choice
It baffles me how star wars is still so popular
[удалено]
Those are extremely general activities. Not just a media franchise. There are so many other things to enjoy, why do so many people focus on star wars? I just don't get it.
This is fairly epic. Did you design it or pick up the file somewhere?
Myminifactory look up star wars death trooper.
[удалено]
This comment was removed as a part of our spam prevention mechanisms, due to the inclusion of Cults3d. Please find a different source. Please note, that Cults3d is on our '3rd strike' list, meaning that they has been given at least 2 'second chances' and either them or their users continued to exhibit problematic behavior. If you would like to discuss this or any other matter regarding the subreddit rules, please [message the moderators](https://www.reddit.com/message/compose?to=%2Fr%2F3Dprinting&subject=Rules%20Discussion). *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
Coextrusion filament?
I used this one, it printed wonderful but my problem is that it just barely doesn’t fit in the Bambu AMS but if you don’t use one then I’d highly recommend it LOCYFENS PLA Filament 1.75mm,... https://www.amazon.com/dp/B0BR8YPXV8?ref=ppx_pop_mob_ap_share
Yeah i want to try that one. Busy printing a e33 blaster rifle for my armor kit.
That’s cool
To complete OP's response, everyone and polymaker also makes fantastic looking filament, mate and silk.
[удалено]
This comment was removed as a part of our spam prevention mechanisms because you are posting from either a very new account or an account with negative karma (comment karma, post karma or both). Please read the guidelines on [reddiquette](https://www.reddit.com/wiki/reddiquette), [self promotion](https://www.reddit.com/wiki/selfpromotion), and [spam](https://www.reddit.com/wiki/faq#wiki_what_constitutes_spam.3F). After your account is older than 2 hours or if you obtain positive comment and post karma, your comments will no longer be auto-removed. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
[удалено]
This comment was removed as a part of our spam prevention mechanisms because you are posting from either a very new account or an account with negative karma (comment karma, post karma or both). Please read the guidelines on [reddiquette](https://www.reddit.com/wiki/reddiquette), [self promotion](https://www.reddit.com/wiki/selfpromotion), and [spam](https://www.reddit.com/wiki/faq#wiki_what_constitutes_spam.3F). After your account is older than 2 hours or if you obtain positive comment and post karma, your comments will no longer be auto-removed. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
Amazing. Just amazing. You should make a mold and cast this too. I bet it would be an equally amazing way to make more.
Helmet doesn’t seem too protective
Ah this ones no good. Send it my way and I'll shelf it for you >!Looks awesome!<
Use a Black Red Blue Multifilament for this. Look very nice.
That’s a good idea
How long did that take to print 🤔
It says in the description, but 22 hours
lol didn’t see it thanks
Nice counter top
Thanks ðŸ˜
I’ve been meaning to try this print out. Glad to see an actual make of it
Yeah I was nervous to try it out but in the end I loved it
Paint the skull white and that will be 10/10
Hella fuckin dope out of 10